Re: [asterisk-users] Mailing List Future

when postings to the (UGH) forum happen though. John Novack -- Dog is my Co-Pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https

[asterisk-users] voip.ms ( was Re: Problems solved )

it! I have used it as my PSTN provider for more than 10 years, with only one hacking issue with voip.ms, which they fixed fairly quickly. I see no reason to change to a protocol that ( it seems ) every thief in the world is banging away on 24/7!! JMO John Novack On 5/27/2023 10:23 AM, Steve

Re: [asterisk-users] Global variables in global variables

You have posted the same message several times in the last few days!! I would assume no one has an answer to your question, at least on this list. It seems most have migrated to another (UGH!) venue, so the few that are left can't help. JMO John Novack Antony Stone wrote: Hi. I have

Re: [asterisk-users] I found an excellent guide: Configure Asterisk VoIP IP PBX SIP Server with Cisco IP Phones

phone. I also read that I can google search for SIP firmware and download them? Is Cisco 7960 better and more advanced than Cisco 7940? On 2020-12-18 22:41, John Novack wrote: When purchasing these phones, make sure they are SIP, as these were available with several different firmware loads You may

Re: [asterisk-users] I found an excellent guide: Configure Asterisk VoIP IP PBX SIP Server with Cisco IP Phones

will be available to you without proper credentials from Cisco John Novack Turritopsis Dohrnii Teo En Ming wrote: Subject: I found an excellent guide: Configure Asterisk VoIP IP PBX SIP Server with Cisco IP Phones Good day from Singapore, Today 18 December 2020 Friday, I found an excellent guide

Re: [asterisk-users] Fwd: Legacy TDM400

version to work with For learning there isn't any good reason to have the latest of anything I have a working version of Asterisk 13 with DAHDI and a 4 port T1 card on CentOS 6, and support a buddy with a TDM 400 or 410 - no issues YMMV John Novack Roy Kidder wrote: Hello all, It's been quite

Re: [asterisk-users] How to DIY/Setup An Open Source IP PBX Appliance/Server?

JMO AstLinux installed on an HP Thin Client is a good choice for someone with limited knowledge of Linux who wants a less steep learning curve. YMMV John Novack Turritopsis Dohrnii Teo En Ming wrote: Subject: How to DIY/Setup An Open Source IP PBX Appliance/Server? Good day from

Re: [asterisk-users] svnview.digium.com down?

Works for me from Comcast! John Novack Doug Lytle wrote: I'm currently reviewing the Digium wiki on migrating from chan_sip to res_pjip and I'm trying to access the script that is provided to help with conversion. https://wiki.asterisk.org/wiki/display/AST/Migrating+from+chan_sip

Re: [asterisk-users] error compiling dahdi for recent kernels

Too bad. LOTS of users will still want to continue to use these cards, example the OP! Good news it probably suppresses prices on used cards! John Novack Malcolm Davenport wrote: Howdy, That is correct. The list of supported cards is in the README file (not the -complete package

Re: [asterisk-users] error compiling dahdi for recent kernels

Doesn't DAHDI 3.0 remove support for a bunch of older cards, including the TDM400 and 410? John Novack Greg Woods wrote: On Thu, Jun 6, 2019 at 12:17 PM Malcolm Davenport mailto:malco...@sangoma.com>> wrote: Howdy, There's a dahdi-linux-complete-3.1.0-rc1+3.1.0-rc1.

Re: [asterisk-users] Paging systems?

the system, as well as quarterly time announcements through call files and a cron job. I use an FXO port off a channel bank, but an ATA with an FXO port should do the trick Enjoy John Novack Michael Munger wrote: Excellent point. This is it: https://www.valcom.com/pdf/v-1109rthf.pdf Get Outloo

Re: [asterisk-users] Paging systems?

a very old Harris PagePak VS that was used with a Western Electric Horizon system back in the dark ages with Asterisk John Novack -- Dog is my Co-Pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com

Re: [asterisk-users] Dropped calls when all DAHDI lines in use

Andrew Martin wrote: - Original Message - From: "John Novack SCII_U" To: "Asterisk Users Mailing List, Non-Commercial Discussion" , "Andrew Martin" Sent: Monday, October 8, 2018 4:29:41 PM Subject: Re: [asterisk-users] Dropped calls when all DAHDI l

Re: [asterisk-users] Dropped calls when all DAHDI lines in use

might find more assistance. John Novack Andrew Martin wrote: Hello, I am running Asterisk 11.17 with DAHDI 2.9.0 and an OpenVox A800P with 8x analog POTS lines coming into my Asterisk server from the phone company. Internally, I have about 180 SIP clients defined in sip.conf. What appears

Re: [asterisk-users] Spontaneous reboot due to MySQL lookups ?

y be using it quite differently that you, it simply works. Is this a newly developing issue, or has it persisted for some time What if any changes have been made to the dialplan etc? Have you considered a strictly hardware issue? Memory? HD? MB?? The crystal ball is very cloudy on this one! J

Re: [asterisk-users] Spontaneous reboot due to MySQL lookups ?

to version 11, which did require some syntax changes to the dialplan. Given that even version 11 is EOL, you really need to put your efforts into doing the migration rather than tracking this one down JMO John Novack Jonas Kellens wrote: Hello using Asterisk 1.8.32. I notice

Re: [asterisk-users] Recommended Linux version or how to compile DAHDI on Fedora?

fixed, and am currently building a 64 bit version on another machine YMMV John Novack Ira wrote: Hi, I’m currently using 32 CENTOS 5 but it’s now unsupported. I only have a 32 bit processor and CENTOS no longer supports 32 bit so I need to move on. I’ve installed the current version of 32 bit

Re: [asterisk-users] how to make International calls from asterisk PBX

of 13? Care to share a portion of your dialplan? With your CLI verbosity set high, what are the error messages? If much of the above is above your paygrade, then perhaps you need to post to the biz list and purchase some help? You will not find any mind readers there either though! John Novack Uzma

Re: [asterisk-users] OT: Explain where mailing list bouncing comes from ?

's why most people who are bouncing would be gmail. Correct Had another one yesterday Am on several other mailing lists that have no such issue. Something related to the mailer Digium uses or their ISP John Novack -- Dog is my Co

Re: [asterisk-users] OT: Explain where mailing list bouncing comes from ?

Not just gmail Happening as well with Comcast.net My Comcast address is set to forward to another domain, as Comcast seems to now block sending mail with a non Comcast "from" address. they turned that on a couple years ago with no notice. John Novack Jonathan H wrote: Me too,

Re: [asterisk-users] Commit dialplan & other config. in memory to disk?

n recreate a machine and have call records and whatever not more than a day stale. John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk commu

Re: [asterisk-users] Alphabet character in destination number (CDR)

this should only happen with in-band signalling.I thought all SIP data was normally sent as data though sip.conf does allow in-band John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-d

Re: [asterisk-users] Realtime SIP peers do not register any more after upgrade to Asterisk 13

Remove yourself READ - Included with every message - asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Dario Estupinan wrote: asterisk-users mailing list

Re: [asterisk-users] rasberry pi

A J Stiles wrote: On Wednesday 06 Jul 2016, John Novack wrote: AstLinux can be remotely managed with the GUI, which unlike other Asterisk GUI's the conf files are not modified by the GUI and can be edited "by the book" AstLinux will NOT work with a Pi though. It is not for the ARM

Re: [asterisk-users] rasberry pi

g AstLinux and various thin clients. The HP's area nice package that can be configured and mounted to a wall and simply forgotten. Sometimes one can be found with the PCI expansion chassis that would allow one PCI card to be added for analog or even a T1 interface. Search AstLinux for much more informa

Re: [asterisk-users] Nube question: where is chan_sip.so?

Was this compiled from source? If a package install, you may be at the mercy of the package creator In version 11, sip is installed by default, unless a noload statement is active in modules.conf All of this may have changed with the transition to pjsip though. John Novack Peter Wallis

Re: [asterisk-users] Best Asterisk Platform

Are you trying to start a religious argument? CentOS /RedHat appear to be the most trouble free when compiling from source JMO John Novack er ic wrote: What is the best asterisk platform to use? What are you guys using? I am looking for something to host either in our data center

Re: [asterisk-users] Best Asterisk Platform

Agreed. I have built close to 40 AstLinux systems, mostly on HP Thin Clients And the excellent GUI is constantly improving. John Novack Michael Keuter wrote: Am 23.12.2015 um 14:31 schrieb er ic <email.eherr9...@gmail.com>: What is the best asterisk platform to use? What are you guys

Re: [asterisk-users] Windows Asterisk Help

use the difficult to troubleshoot and quirky overlays of a TrixBox or FreePBX Check out the astlinux website for more details John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api

Re: [asterisk-users] CDR in an MySQL-Database

error message(s) seem to say it expects to find the MySql server on localhost but you say it is on a different machine!! perhaps you need to fix that first? John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation

Re: [asterisk-users] FXS Solutions for modems and other non jitter tolerant devices

is fearful of the legal beagles. These groups are really slow to change. At least in the USA John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join

Re: [asterisk-users] small homebrew pbx

and connected to the LAN Other newer units with multiple NIC ports and AstLinux can also be your router /firewall Unless one is running a 100 seat call center, no need for one of those huge juice hogs anymore. John Novack -- Dog is my Co-pilot

Re: [asterisk-users] New Asterisk build

Ira wrote: Hello John, Friday, March 6, 2015, 12:34:42 PM, you wrote: Find a HPT5720 with expansion chassis on eBay for under $50, load AstLinux ( instructions at AstLinux.org ) Move your Digium card and your confs , fix up any differences from your But given that means buying an old

Re: [asterisk-users] New Asterisk build

as router and firewall in addition. I prefer the component solution personally, which makes the HP thin clients the way to go. John Novack I have built more than 30 of these systems on various HP Thin Clients, used off of eBay with no failures Ira wrote: Hello Asterisk, Back in 2009 I

Re: [asterisk-users] LAN sip-to-sip

it off! As an aside, I would caution you to not have SIP 5060 exposed to the public Internet, or you will soon regret it. I am sure others will have much better information though John Novack thufir wrote: I'm reading the O'Reilly Asterisk the definitive guide, 4th ed, with a starfish

Re: [asterisk-users] JITTERBUFFER function

Google is your friend!!! http://searchunifiedcommunications.techtarget.com/definition/jitter-buffer http://www.voiptroubleshooter.com/problems/jitterbuffer.html http://www.voip-info.org/wiki/view/Asterisk+new+jitterbuffer http://www.webopedia.com/TERM/J/jitter_buffer.html Peg Leg O'Brien

Re: [asterisk-users] Strange Issue: asterisk deleted

Question remains, how was it compromised? In the original install ? A fresh install perhaps from another source? Best you determine HOW before spending more time going down another rabbit hole! John Novack Antoine Megalla wrote: Hi Thank you for your support. The server is actually

Re: [asterisk-users] Upgraded to 13 and now Mailbox is empty in sip show peers

Eric Wieling wrote: I doubt the person cares, if you don't like people top posting then stop reading their messages. If someone top posts, nothing you do will make them stop top posting. Complaining about something you cannot change just wastes everyone's time.I have a rule which

Re: [asterisk-users] quoting arguments to System command in dialplan

the dialplan Escapes (\) single and double quotes are not uniform from 1.4 through 11. YMMV John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us

Re: [asterisk-users] Channel is answered by FXO card before callee answered the phone(pick up phone)

telephony technology (ISDN or GSM). This is well known behavior for many years, since the inception of Asterisk/Zaptel I wonder why tests had to be run! The OP issue was answered several days ago His issue was obvious and well stated until another poster confused the issue! John Novack

Re: [asterisk-users] Channel is answered by FXO card before callee answered the phone(pick up phone)

of an answered call, calls are considered answered once dialing is complete. You will need to use an alternate technology if you want to know if or when the caller has answered. John Novack -- Dog is my Co-pilot -- _ -- Bandwidth

Re: [asterisk-users] Possible Dahdi compile problem

Possible hardware issue? If you are not using DAHDI, why are you installing it? Did you intend to add some information to this post that was made earlier today? John Novack Doug wrote: I am having problems with system crashes in a dahdi/asterisk compile. The is on a Beaglebone Black

Re: [asterisk-users] Asterisk CLI Banner

. probably because if any case ever goes to court, the decision and possible punishment is up to the whims of the judge and/or jury, and every law is up to interpretation, which can vary from moment to moment. Law is not physics! John Novack -- Dog is my Co-pilot

Re: [asterisk-users] Need more meetme users -- hitting some limit

Watch out for whiplash! John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http

Re: [asterisk-users] Replying to Posts

of these to ( sometimes ) find a reply or maybe, just maybe, an answer. Often it isn't worth the effort to scroll through all the crap to find the pony. John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http

Re: [asterisk-users] stopping unwanted attempts

can be very effective John Novack Steve Murphy wrote: On Sat, Jan 18, 2014 at 3:59 PM, Steve Edwards asterisk@sedwards.com mailto:asterisk@sedwards.com wrote: On Sat, 18 Jan 2014, Jerry Geis wrote: I see MANY of these in my log files: [Jan 15 03:06:12] NOTICE

Re: [asterisk-users] Integration with NEC DSX - help with dial line

will also need to set up an extension number in the 4XX range BEYOND the IP boards possible extensions, why we chose 421 I do NOT use this to place a SIP call TO Asterisk from the DSX Hope this helps. If you need more information, feel free to contact me off list John Novack Here is my sip.conf

Re: [asterisk-users] issue after install dahdi

and your dialplan would help someone give you some assistance. Is this a fresh install, or one that has been working for years? What Digium card? John Novack Salaheddine Elharit wrote: i need your help regarding some issue related to the outband calls i have installed asterisk 1.4.32 with dahdi

Re: [asterisk-users] is g729 codec free? or under license???

. The lawyers want it that way, so it isn't ever going to be any different. John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory

Re: [asterisk-users] proper use of Internal Timing

And here I thought I was back in the dark ages using 1.4.44!! You had better consider moving up to a more current version before you get bit real hard! John Novack Comp Aholic wrote: Hi All, Could anyone tell me the real use of internal_ timing=yes option on asterisk.conf file? I am using

Re: [asterisk-users] Set ringtone by dialed number

that governed within the SIP phone itself Let's not confuse different ringing patterns on analog circuits with SIP. John Novack Your Asterisk at the far end just has to be able to pick up on the caller ID so it knows where the call is coming from, and execute a SipAddHeader() statement to set

Re: [asterisk-users] recommendations for RJ-11 surge supressors?

we are spoiled in the UK . Generally telcos in the US provide protection for THEIR equipment, NOT the subscriber. Of course, dial tone providers via cable provide none other than the RF cable. Always best to provide additional protection regardless. John Novack -- Dog is my Co-pilot

Re: [asterisk-users] Joining an astablished call

In the telephony world that is known as barge-in and is a programmable option granting that right to specific extension(s) in systems that normally have automatic privacy. Not all electronic key and hybrid systems have automatic privacy, though most do. John Novack neo haux wrote: Hi, I

Re: [asterisk-users] What would cause a drop between two asterisk systems?

, why isn't it either fixed or discontinued? It certainly is much less prone to hacking and abuse than SIP. Probably not due to the protocol design as much as it isn't as universal John Novack -- Dog is my Co-pilot

Re: [asterisk-users] fail2ban filter issue

eherr wrote: Not sure if this has been answered but I cannot find a solution. I am running Asterisk 1.4.26.3 Very VERY old. If you need to continue in 1.4, you should really up to the last 1.4.44 Many MANY changes and broken changes between 1.4.26 and 1.4.44 John Novack I am seeing

Re: [asterisk-users] GSM Sip Gateway

From the Freq. list given on eBay, I don't thinkthey are. The listed freqs. are worldwide GSM since the mid 90's, but not 4G John Novack Hans Witvliet wrote: Are these 4G comaptible -Original Message- From: Frank fr...@efirehouse.com Reply-to: Asterisk Users Mailing List - Non

Re: [asterisk-users] GSM Sip Gateway

for data and text? so it may be a non issue John Novack Frank wrote: So anyone would know a gateway working on 3G/4G network ? I remember a website called XY something (I cant find it anymore. I don t remember if it was xywireless.com , or xytelecom.com , or something else) where they seemed

Re: [asterisk-users] How to connect a POTS robo alert dialer to asterisk with email notification

David Smiley wrote: Hi John, On Feb 2, 2013, at 6:52 PM, John Novack jnov...@stromberg-carlson.org wrote: Sounds like a nice application for an HP Thin Client, AstLinux and an FXS ATA Even simpler would be an ATA and a VOIP service, though I don't think much of SIP exposed to the Internet. I

Re: [asterisk-users] How to connect a POTS robo alert dialer to asterisk with email notification

that is nearby and is able to fix whatever is wrong? John Novack -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http

Re: [asterisk-users] Paging for Praying

Shaun Ruffell wrote: On Fri, Dec 28, 2012 at 06:41:38PM -0800, Steve Edwards wrote: On 12/28/2012 08:13 PM, Steve Edwards wrote: Please don't top-post. If you don't know what that means, please consult Google. On Fri, 28 Dec 2012, jon pounder wrote: Please stop saying don't top post, some

Re: [asterisk-users] Need qualifications of SIP trunk providers

they no longer have the number. One has to wait until the port is complete and successful to cancel the previous providers account. It seems the user needs to cancel the account with the mentioned provider John Novack On Thu, Nov 29, 2012 at 5:50 PM, Carlos Alvarez car...@televolve.com mailto:car

Re: [asterisk-users] Need qualifications of SIP trunk providers

was very responsive during this time We all also use the IAX protocol supported by voip.ms and have no complaints John Novack Daniel - Asterisk wrote: Hello List, Since I'm looking for a new VoIP provider for US origination/termination, I will very appreciate if you can chare your experience

Re: [asterisk-users] dahdi firmware for centos 6

Up one level are the DAHDI directories http://downloads.asterisk.org/pub/telephony/ JN Justin Killen wrote: Those are asterisk downloads, not dahdi downloads Justin Killen

Re: [asterisk-users] My digium card die?

[ 22.275029] CHILE [ 22.275030] CHINA [ 22.275031] COLOMBIA snip Spell COLOMBIA correctly! in the conf file It might then begin to work, or on to the next error!! John Novack -- Dog is my Co-pilot -- _ -- Bandwidth

Re: [asterisk-users] Asterisk on Dynamic IP to a SIP extension

private network, as well as an interface to voip.ms, and it just works. I also use IAX for all external connections with good results. Best of luck John Novack Thanks, Doug -- _ -- Bandwidth and Colocation Provided by http

Re: [asterisk-users] VOIP PBX replacement suggestions?

or have other prospects for employment. Just one old fart's opinion. Worth what you paid for it John Novack -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live

Re: [asterisk-users] Caller ID : FSK ETSI or FSK US

Hopeless: Do you know that your provider is delivering CLID? In the US, conventional providers charge extra for CLID and even more for CLID with name Have you ever determined WHICH delivery system is used in your as yet undefined country? Most systems are coded into Asterisk, but require

Re: [asterisk-users] How to stop ringing when incoming PSTN call is answered externally?

and testing to get things to work, with no real gain I am doing this to capture and screen caller ID numbers, but it is not the best solution John Novack -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com

Re: [asterisk-users] Asterisk forward call

Call forwarding ALWAYS sends a partial ring to the line. This is by design from ESS 1 days, and serves to remind the party that the line is forwarded. Asterisk certainly can be configured to ignore the first ring in any number of ways. John Novack Guy Gold wrote: On Tue,May 15 02:00:PM

Re: [asterisk-users] looking for solid state like PC suitable for Asterisk

flash based boards. AstLinux has special configurations for these. I have 20-30 AstLinux on thin clients working without a belch on a private collectors network John Novack Bart Coninckx wrote: Hi all, for smaller (or maybe even bigger) sites I'm looking for a smaller, appliance-type like

Re: [asterisk-users] looking for solid state like PC suitable for Asterisk

Correct. I have never been accused of being a good speller! JN Bart Coninckx wrote: That's Soekris I suppose. Never heard of them, but it looks mighty interesting. Cheers, BC On 05/10/12 13:35, John Novack wrote: I use HP Thin Clients with AstLinux installed. HP 5720's are available

Re: [asterisk-users] Looking for IAX trunk/DID to replace Junction Networks

center for one plan, and less with no free incoming minutes for their value plan Check out their excellent web site. Everyone I have suggested has been very pleased. Several different server locations as well. US and Canada Prepaid service Not associated with voip.ms John Novack -- Dog is my

Re: [asterisk-users] Installing Dahdi, libpri of different versions in one pc

there is an issue with later versions. JMO John Novack Gopalakrishnan N wrote: Hi, I would like to install Dahdi, libpri and Asterisk of different versions in one machine. Lets say, Asterisk 1.6.X, Asterisk 1.8.x and Asterisk 1.4.x to be installed in one machine, this can be done using prefix while

Re: [asterisk-users] asterisk distributions

( or less ) of flash, no hard drive needed, and would allow the student to work with Asterisk without the overhead of learning Linux Building a system from scratch and source code is certainly best however John Novack -- Dog is my Co-pilot

Re: [asterisk-users] Same provider - IAX sounds bad, SIP sounds great

, didn't the manufacture of the Yugo die with the death of Yugoslavia? Most of the Yugo's shortly thereafter? If anyone has one now it may be close to the value of a Delorian No replies necessary or even desired. John Novack Carlos Alvarez wrote: On Tue, Feb 28, 2012 at 6:14 PM, Alejandro

Re: [asterisk-users] SDP Issue

Phil has been using his pseudonym for years, and Alex and his painful/painstaking posting is the only one I have seen even raising the issue. Says even more about Alex than Phil Peg Leg O'Brien Alex Balashov wrote: I wasn't so much poking fun at the substance of your post as the fact that

Re: [asterisk-users] asterisk 1.8.8 - caller ID not working.

, then broken again John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http

Re: [asterisk-users] Is Asterisk 1.4 compatible with 1.8.7 ?

Asterisk 1.4 after, or beginning with, 1.4.26 DOES know about call tokens, so this must be upset about something else John Novack Danny Nicholas wrote: Change requirecalltoken from auto to no. 1.4 has no knowledge of this parameter so turning it on in 1.8 creates an incompatibility (IMO

Re: [asterisk-users] TE122

. John Novack -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list

Re: [asterisk-users] Delay before ringing from PSTN`s call

and protocols You will need to dig into that first. John Novack neo haux wrote: Hi I am testing a degium TDP400P (2fxo+2fxs) on my asterisk I configured incoming calls from pstn to ring my SIP phone (extension : 100) cat extensions.conf ... [from-pstn] exten = s,1,Dial(SIP/100,10) same = n,VoiceMail

Re: [asterisk-users] PSTN connectivity

is attempting to dial out on a non existent SIP connection Something isn't right in your dialplan, created by FreePBX Also, no echo canceller on the X100 card isn't wise, but you will not realize that until you are able to use it! John Novack On Thu, Sep 29, 2011 at 1:00 PM, Sam Govind govoi

Re: [asterisk-users] Anybody using BinFone Telecom?

an excellent website with many options and easy configuration John Novack ft...@mindspring.com wrote: Does anyone have any experience with BinFone for IAX termination? They good look on the website, but I'm looking for any comments

Re: [asterisk-users] Who is the creative mind behind changing Asterisk commands at CLI?

jon pounder wrote: On 09/25/2011 04:41 PM, Alex Balashov wrote: Sometimes people get such swelled heads they need a slap back to reality - I completely agree with him the changes were idiotic. Obviously the comments touched a nerve with you or you would not have replied. And let's not

Re: [asterisk-users] Inter-astersik dialling encounteres no audio

I have this problem? If the router is blocking RTP traffic, then why is that I have no audio problem in case B? Thanks in advance. Why not use IAX John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation

Re: [asterisk-users] Question about voip.ms service.

Asterisk will, though. John Novack naren wrote: That's what I am hoping to do as well. Could you share some insight on how you set up the DID on the voip.ms http://voip.ms web site to forward to Asterisk using IAX? In particular I am trying to find out where you set the url / ip address

Re: [asterisk-users] Question about voip.ms service.

example requirecalltoken=no ; required after 1.4.26 Hope this helps JN I opened a ticket with voip.ms http://voip.ms as well about an hour ago. I do like their service as well, that is why I want to try and get it working with them. Thanks John. On Tue, Sep 13, 2011 at 5:29 PM, John Novack jnov

Re: [asterisk-users] Question about voip.ms service.

Never have had a problem with their IAX service. And ( for now ) a little hedge against the hackers. Since Asterisk is involved, why not use IAX anyway? John Novack naren wrote: I also found this... seems like voip.ms http://voip.ms outbound is broken for now! http://pbxinaflash.com

Re: [asterisk-users] Looking for ideas for nice **Asterisk** home phone system

for a private VOIP network of telephone collectors. Many also integrate PSTN lines through various means 5720's can be had on eBay for a LOT less money John Novack linux guy wrote: Great discussion, all of it. Thanks, people. How much power does the home asterisk box need ? I'm using Asus

Re: [asterisk-users] Looking for ideas for nice home phone system

on the wall, do some quick programming, and forget it for the next 20 years, barring a power or lightning hit. No steep learning curve required. Certainly less expensive hardware John Novack On 8/22/11, John Novackjnov...@stromberg-carlson.org wrote: NEC-DX-40 is another best buy Single pair phones 2

Re: [asterisk-users] Looking for ideas for nice **Asterisk** home phone system

. Good luck and revisit when you have something up and working and have some serious questions John Novack Has anyone figured out how to minimize cell charges when on the road via making calls via the home phone system ? Does anyone have their cell phone forwarded to their home phone system

Re: [asterisk-users] Looking for ideas for nice home phone system

C F wrote: On Tue, Aug 23, 2011 at 5:21 PM, John Novack jnov...@stromberg-carlson.org wrote: snip What do you mean by MD? MD is a common telephony term for Manufacture Discontinued John Novack -- Dog is my Co-pilot

Re: [asterisk-users] Looking for ideas for nice home phone system

NEC-DX-40 is another best buy Single pair phones 2 analog station ports door box ports AND remote programming via LAN or WAN Voice mail available with or without email notification SIP gateway option Far superior to the TA-824 and Partners John Novack C F wrote: Panasonic KX-TA824

Re: [asterisk-users] Answering machine answers after pickup a phone.

a task for a simple answering machine from Wal-Mart All you other phones should be connected to FXS ports, or you need to be smarter in your dialplan. Once you answer, Asterisk is behaving normally John Novack Jorge Barreiro wrote: Hi again, thanks for your answer, but it didn't solve

Re: [asterisk-users] Answering machine answers after pickup a phone.

believe the driver fully supports it using a TDM 4xx or even better a single port T1 card with a channel bank gives a lot more ports for the cost John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided

Re: [asterisk-users] Compact, affordable x86 devices?

of the Neoware units will also do the job. John Novack Gilles wrote: Hello I'd like to build a compact, affordable, fanless x86 solution to handle my home landline. I know about the following two platforms: 1. www.pcengines.ch/alix.htm alix1d + case 100€ Does Availability500 mean

Re: [asterisk-users] Compact, affordable x86 devices?

their site for more details there are other low cost solutions around as well. the ALIX boards I have seen do not impress me. I think they are somewhat overpriced. Jut one opinion John Novack Gilles wrote: On Mon, 18 Jul 2011 08:04:31 -0400, John Novack jnov...@stromberg-carlson.org wrote

Re: [asterisk-users] Conference feature

. Someone needs to RTM on telephony! John Novack -- Dog is my Co-pilot -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs

Re: [asterisk-users] Ground Start ATA / VOIP Gateway

is available with many channel banks though a T1 card and channel bank might be overkill for your application. Is this to go into a legacy switch? Most have line cards that can be easily switched to Loop Is this in the US, or ??? John Novack -- Dog is my Co-pilot

Re: [asterisk-users] Ground Start ATA / VOIP Gateway

The SV8100 can do either ground or loop Assuming you can access the system it can easily be changed. Programming manual here: http://www.telecomcepts.com/downloads/SV8100/SV8100 Programming Manual_1.pdf the original installer may have locked it down, but it CAN be changed. John Novack

Re: [asterisk-users] Ground Start ATA / VOIP Gateway

that system can also handle IP trunks, though the equipment might not be available to you or outside your budget window How does this relate to Asterisk, or does it? John Novack Robert Huddleston wrote: I'll have to look at that then -- as I thought the card actually said Ground Start

  1   2   3   4   5   6   7   >