Hi bkw
Yep, which is going to be a huge problem since it's only taking a line and
not doing any transmittal until after you get a line out, the line of course
is being rejected before I can even get there :(
Of course I can't even establish connectivity to the telco whilst having it
peered to
Hi all
OK this may sound like a good one but maybe someone can tell me.
Simple context is - I want to unplug my existing conventional PBX from the
Telco and place * with it's TE410P in between.
Now the difficult part, the existing connection is E1 PRI (Q.931) with 6
B-channels. I need to be
Hi all
Having a very much bit of an oddity with some phones connected to a
Rhino 24 port FXO Channel Bank off a TE410P... Though I can find similar
references to this throughout the asterisk-users list I can't find a
solution.
If you pick up a phone, then replace the receiver, the phone will
Hi all
Another oddity for you...
24 port FXO Rhino Channel Bank connected to a TE410P card on Span 1, 6
channel Q.931 PRI connected to Span 2 (Telewest not BT so using Nortel
Equipment), Caller ID will not appear on the client phones (ADSI
PT350s).
The CLI says:
-- Executing Dial(Zap/25-1,
Hi All
If I want to get my ADSI Phones (successfully connected off a Rhino Channel
Bank and TE410P) to connect to Asterisk to get their config downloaded, is
there something specific needed in extensions.conf for them to dial to get
this?
Thanks :)
Hi all
I've been trying to make * work with IAXtel to no avail, all seems ok in
the config but am not getting anywhere
This is what I'm getting from console (user/pass/dest # changed for
obvious reasons):
DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT
on RTP to 0
I bought some Snom phones which work nicely with Asterisk from:
ProVu Communications Ltd
Bank House
Marsden
Huddersfield
HD7 6BR
01484-840048
[EMAIL PROTECTED]
www.provu.co.uk
-Original Message-
From: Angel Gabriel
Sent: 13 September 2003 13:02
To: * Users
Subject:
Hi all
I've only been working with Asterisk for a matter of days but have
already grown into a big fan =) Much as I've managed to get internal
calling working fine, I have a configuration running on an old PII-233
on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond
W6692 PCI Card