[asterisk-users] _ALERT_INFO replacement in 1.4?

does not ring. Extension 600, 602 and 603 are all hooked up to Sipura ATAs and need the bellcore-r4 ringtone to differentiate from other incoming lines. Any ideas? Thanks Nikhil Jogia ___ --Bandwidth and Colocation provided by Easynews.com

Re: [asterisk-users] _ALERT_INFO replacement in 1.4?

Bruce Reeves wrote: Does SIPAddHeader(Alert-Info:) not do it? No, but from another thread, setting the _SIPADDHEADER variable works. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update

[asterisk-users] Outbound Call Transfer Problem

Hi I am using Asterisk 1.2 and for the life of me, I am unable to transfer outbound calls (eg calls I initiate from sip extensions). When I press #, nothing happens. Inbound calls transfer fine, but only once per call. The problem happens: - With both software and hardware phones. - With

Re: [asterisk-users] Outbound Call Transfer Problem

Noah Miller wrote: I am using Asterisk 1.2 and for the life of me, I am unable to transfer outbound calls (eg calls I initiate from sip extensions). When I press #, nothing happens. Inbound calls transfer fine, but only once per call. Any suggestions? I have questions: 1) what version of

[Asterisk-Users] ALERT_INFO Not Working Upon Upgrade to 1.2.1

Hi All, The setup I have is an asterisk box with a sipura spa 2000 for the fxs ports and a TDM400P with 2 fxo ports. Anyway, I recently upgraded from 1.0.9 to 1.2.1 and have found a very annoying problem. One of my dialplans includes this statement in order to distinguish between the 2

Re: [Asterisk-Users] ALERT_INFO Not Working Upon Upgrade to 1.2.1

On Tuesday 20 December 2005 08:01 am, BJ Weschke wrote: On 12/19/05, Mojo with Horan Company, LLC [EMAIL PROTECTED] wrote: I'm pretty sure ALERT_INFO became _ALERT_INFO, so change your line to read: SetVar(_ALERT_INFO=bellcore-r4) and it should work again. Actually, having just checked

[Asterisk-Users] Doing a # transfer on calls needing a #

Evening All, I was wondering how I would go about enabling the usual # + ext transfer on a call requiring user input followed by a #. For example, when I say ring a bank, they ask me for my account number, I key it in and then press the # key. Of course this doesn't work if I have the T option

[Asterisk-Users] Call Waiting

Hi, I have just set up an Asterisk box.it sure is a big job to get everything perfect, especially when you have picky users. Anyway, the box has 2 X100P's and a couple of sipura spa-2000's connected to the LAN. 1 of the lines connected to the X100P's goes straight to extension 1000 after a

<    1   2