Hello.
I have a TDM 2400P and havent figured out how to
attach a phone to one of the FXS channels in the bank and dial out. To dial in
the analog phone is easy, all I had to do was to insert a line in the
extensions.conf saying exten = 430,1,Dial(Zap/17,20,t). But I cant
figure out how
at 02:28:40PM -0300, Robson Ribeiro wrote:
Dear Jay, maybe I would better describe the sound as breaking and
not skipping. It is a constant thing so the person on the other side
can't understand a word. It's like when you are in a bad cellphone
connection. It ONLY happens and this is the weird
echocancelwhenbridged=no
echotraining=800
toneduration=200
busydetect=yes
signalling = fxs_ks
rxgain=5.0
txgain=-10.0
channel = 1-4
channel = 5-8
signalling = fxo_ks
channel = 17-20
channel = 21-24
Best Regards,
Robson Ribeiro
MSN: [EMAIL PROTECTED
, 2006 1:23 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] TDM2400P
On Thu, Sep 21, 2006 at 12:28:16PM -0400, Robson Ribeiro wrote:
Hi all, I have a TDM2400P w/ echo cancellation, 8 FXSs and 8 FXOs.
They are installed respectively on banks 1,2,5 and 6. The problem
I am
, Robson Ribeiro
[EMAIL PROTECTED] wrote:Dear Jay, maybe I would better describe the sound as breaking and not skipping. It is a constant thing so the person on the other side can't understand a word. It's like when you are in a bad cellphone connection. It ONLY happens and this is the weird part, when I
Erik, the TDM2400 is not in conflict with other interrupts BUT, i saw something very weird: Lspci:04:09.0 Ethernet controller: Digium, Inc.: Unknown device 2400 (rev 11)It is seen by Ubuntu as an Ethernet board but when I cat /proc/interrupts look:
CPU0 0: 949222 IO-APIC-edge timer 1: 8913
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TDM2400P
Try turning off of echotraining. Sometimes it does more harm than good.
Matthew Fredrickson
On Sep 21, 2006, at 11:28 AM, Robson Ribeiro wrote:
Hi all, I have a TDM2400P w/ echo cancellation, 8 FXSs and 8 FXOs
in 8192 sample intervals 100.00%8192 samples in 8192 sample intervals 100.00%8192 samples in 8192 sample intervals 100.00%[2]+ Stopped ./zttest -v
Hope it helps me solve the problem i am runnign out of time and ideas.thanks,Robson Ribeiro
:03PM -0300, Robson Ribeiro wrote: Erik, the TDM2400 is not in conflict with other interrupts BUT, i saw something very weird: Lspci :04:09.0 Ethernet controller: Digium, Inc.: Unknown device 2400 (rev 11)
To get the latest list of PCI IDs descriptions, try:update-pciidslspci -n should tell you
Hi Folks,
After going to the paifull steps of installing AreskiCC and finally being able
to access the webinterface, connecting to *, importing rates and setting up
accounts I am not being able to make a CALL: No matter what number i try to
dial I get the same response: The number you have
I have a Sangoma Card with two PRIs. They are both
configured in Zaptel and Zapata;
In Zapata I have them separated in Group 1 and 2 but if I
make a call and specify Zap/g2 it doesnt go when calling Channels :
HERE IS what I get:
Accepting AUTHENTICATED call from x.x.x.x
Hi all,
I am using a Sangoma with two PRIs. As far as land phones,
the calls are fine but it refuses all cellphone calls:
My configuration in Zaptel is
span=1,0,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,0,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-61
and
Hi all,
I am having a problem with a recent installed *. The IVR,
voicemail internal greeting sounds dont play!. I see on the CLI
interface that it is playing but I cant hear anything.
I have the following configuration on the asterisk.
-
Current Asterisk CVS
-
A TDM400 with 4
Hi,
I have installed AreskiCC on Slackware 10.1 with Asterisk
latest CVS and Postgres 7.4. First of all the instructions are very confusing
and hard to follow if you are not an expert. But, I managed to install it
andobviously t doesnt work. The other instructions I found on
wiki are
Hi,
I have installed AreskiCC on Slackware 10.1 with Asterisk
latest CVS and Postgres 7.4. First of all the instructions are very confusing
and hard to follow if you are not an expert. But, I managed to install it
andobviously t doesnt work. The other instructions I found on
wiki are a
Hi,
When trying to compile ASTCC i am getting the following error:
[EMAIL PROTECTED]:/usr/src/astcc# make install
mkdir -p /var/www
mkdir -p /var/www/html/_astcc
mkdir -p /var/www/cgi-bin/astcc-admin
chmod 755 ./astcc.agi
chmod 755 ./astcc-admin.cgi
echo | ./astcc.agi /dev/null
Can't locate
I have the current version og mpg running. But i am geeting the same problem
even with the ringing tone. It seems to disappear sometimes
make[1]: Entering directory `/usr/src/mpg123-0.59r'
make[2]: Entering directory `/usr/src/mpg123-0.59r'
make[2]: `mpg123' is up to date.
Hi folks,
I am having a problem with MusicOnHold. Right now I have the following
configuration:
Default = mp3:/var/lib/asterisk/mohmp3
The problem is that I can't hear the music or sometimes the music seems to
skip like a scratched record...
Robson
Title: Dial While on IVR
While the call is going into the IVR how can I Dial an extension and get immediately connected interrupting the IVR?
Robson
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Anyone has any idea what does this error means when executing an IAX2 call?
Apr 22 11:50:19 WARNING[9124]: Received mini frame before first full voice
frame
The called party can hear but the calling, no. Is this a fine tunning into
iax.conf?
Thanks,
Robson
Guys, every now and then this error comes up. I can't heat the party i Call.
It doesn't seem normal:
Apr 22 17:57:20 WARNING[9124]: chan_iax2.c:6006 socket_read: Received mini
frame before first full voice frame
Apr 22 17:57:20 WARNING[9124]: chan_iax2.c:6006 socket_read: Received mini
frame
Title: FXO GW Dial in/out syntax
Hi all,
I have a non-branded FXO Gateway connected to 4 analog lines at the office. The situation is that I figured out how to make it dial in with the following entries:
In sip.conf:
[4003]
username=4003
fromuser=4003
dtmfmode=rfc2833
type=friend
Frtiz is a nightmare although it is cheap and I have seen it
working. I have been trying to install it for some days without success but one
thing is for sure: you have to use the right Kernel (they are available for
2.4.20 and 2.6something). There are no clear instructions to install it,
Title: [Asterisk-Users] Problem compiling 2nd AVM Fritz
I am having the exact problem. I managed to get to only 1 error by making sure the paths were correct. But yesterday 11PM the achine froze. Only this morning i will find out whats wrong.
Robson
Shane Dalgleish asterisk at
I have reviewed everything, notes etc but I can't get the fcpci.o to show up
in the src.drv or anytother directory. Here is what I am getting when I do
make:
[EMAIL PROTECTED]:/usr/src/fritz/src.drv# make
cc -c -DMODULE -DMODVERSIONS -D__KERNEL__ -DNDEBUG -D -DTARGET=\\
-march=i386 -O2 -Wall
Is it possible to have on the same machine an ISDN Fritz
Card and a TDM400 with two FXO ports? If so, is there any place I can find
instructions to configure it?
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Thanks for your reply, my doubt rest on the fact that there
are two ways of configuring it: One using the Bristuff from Junghanns and the other
using CAPI. Is there any major difference/advantages to one or the other?
p.s. I cant find instructions on how to configure
bristuff besides
Does anyone has instructions on how to install the Fritz PCI
Card with Zaptel? There is no clear instructions in Junghanns.net nor on the
Fritz Card
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Hi Oliver, I am trying to install only the Fritz Card. But
according to the instructions on:
http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install
it doesnt work. The directories, even the changes
that they suggest on the makefile are not there!! I am really
Title: [Asterisk-Users] ISDN Fritz and TDM400
Damian, thanks for the support. Until now I have had no success with all the kernel compilations, ISDN CAPI Utilities etc. I am almost there but it sucks. Wouldnt be a better way just to simply do it withouth having to spend so much time with it?
Does anybody has instructions on how to configure the Micronet ISDN 128K card
with Asterisk?
Thanks,
Robson Ribeiro
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE
Do you mean the same as the AVM Fritz PCI Card? Does it uses the same CAPI and
other drivers?
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
Hi,
If I want a user to, while waiting for a transfer after responding to an IVR,
to listen to music instead of a ring sound, what is the change should i do in
extensions.conf? Is it on the IVR menu or on the optional extension
Txs,
Robson
___
Hello all,
I am having a serious problem installing my * with a TDM04B. I made everything
work, call are coming in and going out including using a GSM Box in channel
Zap/2-1. I did setup voicemail like this on extensions.conf:
[incoming]
exten = s,1,Dial(SIP/2246,20)
exten = s,2,Wait,2
exten =
Does anybody has a link for a step by step explanation on how dows MWI works
in Asterisk with a SIP phone? I hacve added the mailbox line in SIP.conf but
i got nothing :(
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Hi and thank you.
I am a beginer trying to install my first TDM04B.
I am able to receive call with the card using:
[incoming]
exten = s,1,Dial(SIP/robgol,20,tr)
on my extensions
but, with
[outgoing]
exten = _0X.,1,Zap/1/${EXTEN}
I cant send them out. I am getting the
Hi and thank you.
I am a beginer trying to install my first TDM04B.
I am able to receive call with the card using:
[incoming]
exten = s,1,Dial(SIP/robgol,20,tr)
on my extensions
but, with
[outgoing]
exten = _0X.,1,Zap/1/${EXTEN}
I cant send them out. I am getting the
Daniel, i found the problem. Actually besides a mistype
error on the extensions.conf. It was all about USB
conflict. I went into the BIOS and reserverd IRQ's 11,12,13
and 14 (just to be safe) and it worked. After i found the
mistype i could only send and receive calls on the first
channel
38 matches
Mail list logo
