At 22:00 29-10-2003 +0100, you wrote:
Just remember part of the design of the TE410P is that you can use T1
channel banks (you only get 24 ports) , if you buy these in America they
are significantly cheaper than E1 channel banks. Just assign one of the
incoming ports on the TE410P to be T1
Hi!
Is there anyone that are using a E1-channelbank and have any tips about some
type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I
think we're using some slightly modified version here in Sweden, but I'll
check that tomorrow) and connect one port to a channelbank for 30
AFAIK, it is not the channel bank that encodes the caller id at all.
The channel bank only has to support sending on hook audio. The caller id
is sent by asterisk as inband audio, and the channelbank just passes it on.
I believe it is just a modification of a regular low speed modem format -
At 21:39 29/10/03 +0100, you wrote:
Hi!
Is there anyone that are using a E1-channelbank and have any tips about some
type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I
think we're using some slightly modified version here in Sweden, but I'll
check that tomorrow) and connect
Just remember part of the design of the TE410P is that you can use T1
channel banks (you only get 24 ports) , if you buy these in America they
are significantly cheaper than E1 channel banks. Just assign one of the
incoming ports on the TE410P to be T1 not E1.
unfortunately you loose 6