Hi,
I too am experiencing the same problem you have.
I am using inband DTMF processing with ULaw (G711) and like you I notice
that Asterisk seams to be passively listening to the line waiting to hear
a DTMF. When it hears a DTMF it mutes the handset and
regenerates my original DTMF (in a
I am using an SPA-3000 and after using Ulaw (G711) on my * to FXO side
(not FXS) it seems to work fine. I believe there is a problem with * and
DTMF that is being worked on and there should be something new to (try) in
the 1.4 release this summer. I don't think you mentioned your hardware. I
think
Hope this could help,
Please note Inband DTMF won't work unless the codec is ulaw or alaw
(G711). Use out of band DTMF aka rfc2833 or info.
http://www.voip-info.org/tiki-index.php?page=Asterisk+sip+dtmfmode
best regards,
Marco Mouta
ps.give me some feedback if it worked
On 6/29/06, Shane
Hi Marco,
Yeah, using g.711-u for all network traffic for that
reason. One just can't dial too fast as from my reading of
the debug logs, Asterisk is detecting the tone, dropping
the bridge and retransmitting once the tone is complete.
My handset can key quite quickly so am not surprised it
Shane wrote:
Hello,
Ther's probably a simple answer to this but I've searched
around and haven't located anything as yet. Is there a way
to have DTMF tones passed through Asterisk without it
messing with them? I am using a tdm21b card and when I
call an ivr system from the telephone handset
On Thu, Jun 29, 2006 at 10:42:05AM -0700, Shane wrote:
Ther's probably a simple answer to this but I've searched
around and haven't located anything as yet. Is there a way
to have DTMF tones passed through Asterisk without it
messing with them? I am using a tdm21b card and when I
call an
I assume you are using g711a/u?
Anything else will have issues with dtmf inband
On Jun 29, 2006, at 2:52 PM, Michael George wrote:
On Thu, Jun 29, 2006 at 10:42:05AM -0700, Shane wrote:
Ther's probably a simple answer to this but I've searched
around and haven't located anything as yet.