Hello
I just installed a TE110P in a Dell Poweredge 750 (rackmount), which
is connected via crossover T1 cable to a adit 600. Anyway, I've
encountered an array of errors, which I believe I have narrowed down
to the 22 IRQ misses I encounter on zttool. I've noticed that the
te110p and the usb
http://www.digium.com/index.php?menu=compatibility
On Mon, 2005-06-06 at 09:30 -0400, Tom Hayden wrote:
Hello
I just installed a TE110P in a Dell Poweredge 750 (rackmount), which
is connected via crossover T1 cable to a adit 600. Anyway, I've
encountered an array of errors, which I
Tom Hayden wrote:
-- Errors generated by asterisk
chan_zap.c:7970 pri_dchannel: PRI Error: We think we're the CPE, but
they think they're the CPE too.
Tom,
For this errror, you need to type the following on the Adit.
set a:1 line loopdown
Doug
The sharing of an IRQ is indeed a problem
Read this tutorial to know exactly what to do:
http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_noise.html
Greetings,
zoa,
Tom Hayden wrote:
Hello
I just installed a TE110P in a Dell Poweredge 750 (rackmount), which
is
The problem is that both adit600 and Asterisk box are configured as
clock slaves (pri_cpe).
Change pri_cpe to pri_net in your zapata.conf, and your asterisk box
would be the clock source.
It should work. Good Luck.
Argentilinux.
Tom Hayden escribi:
Hello
I just installed a TE110P in a Dell
I Changed it to pri_net and get the following error now:
Jun 6 08:52:17 WARNING[3438]: chan_zap.c:7970 pri_dchannel: PRI
Error: We think we're the network, but they think they're the network,
too.
Any ideas?
--
Tom
On 6/6/05, Gustavo Alvarez [EMAIL PROTECTED] wrote:
The problem is that both
Hmm, looks like i sent that email a little too fast. ( i scanned through
the email but didn't read it all for some reason... sorry)
You seem to have two problems, the error is not related to a shared irq
but to a setting on either the adit 600 or in the zapata.conf
From your last email it looks
Thats really strange,
one side has to be pri_net and the other pri_cpe always, no matter what
devices you use (cisco, asterisk, nortel, ericsson, etc.)
If you set asterisk as pri_cpe, and it says the other side is also
configured as pri_cpe, change it to pri_net.
If it also says that the
Not strange at all. One of the two devices is in loopback mode, and
my first guess would be the 600. Fix that first, then muck with the
parameters in zapata.conf.
Thats really strange,
one side has to be pri_net and the other pri_cpe always, no matter what
devices you
Is there some kind of guide available or information about connecting
to the adit or using it's CLI console? All I have is a null-modem
cable. Will that work? Thanks
--
Tom
On 6/6/05, Zoa [EMAIL PROTECTED] wrote:
Hmm, looks like i sent that email a little too fast. ( i scanned through
the
Tom Hayden wrote:
Is there some kind of guide available or information about connecting
to the adit or using it's CLI console? All I have is a null-modem
cable. Will that work? Thanks
I'm in the middle of discovering and setting up and Adit 600 with 2 FXOs
and 1 FXS cards, once I get a
)
which is pretty useless. Enable telnet on the DRAC card for console access.
Craig
- Original Message -
From: Tom Hayden [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Monday, June 06, 2005 9:30 PM
Subject: [Asterisk-Users] IRQ Problems
Hello
I just installed a TE110P
Well, it seems to be working better now, but everything gets rejected
with cause code 44. I probably shouldn't, but I started a new thread
about that. I can't call in or out - all cause code 44. I suspect
it's coming from the adit - Calling my telco/adit installer.
--
Tom
On 6/6/05, Rich
13 matches
Mail list logo
