Marc,
I have a box with two TDM400P's. All of the ports are
FXO's. System is working fine on CentOS.
Regards,
Dovid
Can someone give me a definite answer as to wether
or not you can
reliably run multiple TDM400P's in the same machine?
I need 4 x FXO and 4 x FXS to connect to both the
PSTN
I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing
key system, but I have seen several threads suggesting that this is
not a supported configuration
This bad boy might be what you need:
Same setup with two TDM400 (8FXO) running for over a year.
On Tue, 2006-02-21 at 01:37 +0100, Thomas Artner wrote:
Am Tuesday 21 February 2006 00:24 schrieb Marc Archer:
Hi All,
Can someone give me a definite answer as to wether or not you can
reliably run multiple TDM400P's in the
3 TDM cards here, I had artifacts if any of the cards were sharing
interrupts, the trick was to add the cards 1 at the time to get them
each on their own irq. The system isn't in production yet, so I don't
know how well it'll hold up under load, so far so good in testing
though.
9xFXO 1xFXS
3 TDM cards here, I had artifacts if any of the cards were sharing
interrupts, the trick was to add the cards 1 at the time to get them
each on their own irq. The system isn't in production yet, so I don't
know how well it'll hold up under load, so far so good in testing
though.
9xFXO
Hi All,
Can someone give me a definite answer as to wether or
not you can reliably run multiple TDM400Ps in the same machine?
I need 4 x FXO and 4 x FXS to connect to both the
PSTN and existing key system, but I have seen several threads suggesting that
this is not a supported
Hello, Marc!
At 06:24 PM 02/20/2006, you wrote:
Can someone give me a definite answer as to wether or not you can
reliably run multiple TDM400P's in the same machine?
I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing
key system, but I have seen several threads suggesting that
Marc:
At 06:24 PM 02/20/2006, you wrote:
I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing
key system, but I have seen several threads suggesting that this is
not a supported configuration
This bad boy might be what you need:
Marc Archer wrote:
Can someone give me a definite answer as to wether or not you can
reliably run multiple TDM400P’s in the same machine?
I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing key
system, but I have seen several threads suggesting that this is not a
supported
Am Tuesday 21 February 2006 00:24 schrieb Marc Archer:
Hi All,
Can someone give me a definite answer as to wether or not you can
reliably run multiple TDM400P's in the same machine?
I need 4 x FXO and 4 x FXS to connect to both the PSTN and existing key
system, but I have seen several
Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Multiple TDM400P's in a single machine
Am Tuesday 21 February 2006 00:24 schrieb Marc Archer:
Hi All,
Can someone give me a definite answer as to wether or not you can
reliably run multiple TDM400P's
Depending on the setup, you might actually need 8 x
FXO.
PaulH
- Original Message -
From:
Marc
Archer
To: asterisk-users@lists.digium.com
Sent: Tuesday, February 21, 2006 10:24
AM
Subject: [Asterisk-Users] Multiple
TDM400P's in a single machine
Hi
On Mon, Feb 20, 2006 at 05:40:11PM -0800, Kerry Garrison wrote:
Yes you can but it is generally not a good idea nor is it simple to resolve
the additional IRQ conflicts on some machines.
-Kerry
Not all boards have IRQ conflicts in the first place. Most newer boards
support IO-APIC, and thus
13 matches
Mail list logo