Hey everyone, I haven't seen an issue quite like mine, so I am hoping
anyone who used the Polycom 601's may have an idea.
We are going to be switching our office over to Asterisk. All the phones
are going to be 601's, I am going to set up a boot server, but for now I
am just going to test
[test]
type=friend
secret=blahpoly
insecure=yes
host=dynamic
qualify=500
nat=no
mailbox=testmailbox
callerid=Yourname test
conext=local
disallow=all
allow=ulaw
progressinband=no
here is the local section of the dial plan.
exten = 850,1,Goto(Mercury-Network,850,1)
exten =
What does the dialplan for the Polyocm 601 (the one the phone uses,
not Asterisk) look like?
You can see if it's a polycom or asterisk thing, by enabling sip
debug, and watch what is coming in from the Polycom. if nothing is
coming then it's the Polycom doing it.
On 2/23/06, Kevin Smith [EMAIL
Hey everyone, I haven't seen an issue quite like mine, so I am hoping
anyone who used the Polycom 601's may have an idea.
We are going to be switching our office over to Asterisk. All the phones
are going to be 601's, I am going to set up a boot server, but for now I
am just going to
Hey guys,
Thanks for the suggestions. I did find the problem. Looking in the sip
debug, I was getting a 407 error, corrected that, then was getting a
404. Which lead me to look at my context and bam...typo, I had conext
instead of context. Corrected that and all is well. Thanks again.
Kevin