Hi all,
I have a box running asterisk with T410 connected to a Nortel DMS 100 switch
and another box running SER with grandstream phones on it
So if there is a call from the pstn it goes from the Nortel to the asterisk
and then to the SER box and finally to the phones.if the phone is busy or
the
PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Aimable
Sent: 17 June 2004 10:29
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Problems with PRI with T410 messages
Hi all,
I have a box running asterisk with T410 connected to a Nortel DMS 100 switch and
another box running SER with grandstream
Send traces.
- Original Message -
From: Aimable [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 17, 2004 6:28 AM
Subject: [Asterisk-Users] Problems with PRI with T410 messages
Hi all,
I have a box running asterisk with T410 connected to a Nortel DMS 100
switch
This is a problem I pointed out to Digium a while back, but I am not sure
Markster understood the issue and I didn't really have the time to follow it
up. It does need fixing though, as it is a major drawback in the current
architecture.
Rgds
Tim
Hi all,
I have a box running asterisk with
-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--__--__--
Message: 3
From: CW_ASN [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Problems with PRI with T410 messages
Date: Thu, 17 Jun 2004 08:13:03 -0300
Reply
ACKNOWLEDGE (15)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of CW_ASN
Sent: 17 June 2004 12:13
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Problems with PRI with T410 messages
This is a problem I pointed out to Digium a while back, but I am
I do not believe you are correct. We see CALL PROCEEDING in both
directions as part of the normal ISDN call setup process. See trace
below.
Asterisk sends 'CALL PROCEEDING' followed immediately by 'ALERTING'. CALL
PROCEEDING is normally an acknowledgement to a SETUP. See Q931 below:
