Hi.
I have succesfuly installed asterisk and after I added a x100p card, but
the system doesn't seem to know the card is there. This is what I've done:
compiled and installed zaptel, libpri and asterisk in that order using
make clean ; make install commands. also, make samples for asterisk.
Grave [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Sunday, September 12, 2004 6:50 AM
Subject: [Asterisk-Users] Problems installing x100p
Hi.
I have succesfuly installed asterisk and after I added a x100p card, but
the system doesn't seem
Grave [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Sunday, September 12, 2004 6:50 AM
Subject: [Asterisk-Users] Problems installing x100p
Hi.
I have succesfuly installed asterisk and after I added a x100p card, but
the system doesn't
]
To: Asterisk Users Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Sunday, September 12, 2004 6:50 AM
Subject: [Asterisk-Users] Problems installing x100p
Hi.
I have succesfuly installed asterisk and after I added a x100p card,
but the system doesn't seem to know the card
-Users] Problems installing x100p
Hi.
I have succesfuly installed asterisk and after I added a x100p card,
but the system doesn't seem to know the card is there. This is what
I've done:
compiled and installed zaptel, libpri and asterisk in that order
using make clean ; make install commands. also
Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Sunday, September 12, 2004 9:47 AM
Subject: Re: [Asterisk-Users] Problems installing x100p -- Main board is
notrecognizing the card
The mainboard is not recognizing the x100p card. It is not showing the
card on the PCI devices listing
Rodolfo Grave a écrit :
The mainboard is not recognizing the x100p card. It is not showing the
card on the PCI devices listing after POST
Any ideas, please?
Remove all unnecessary PCI card and try (eg only VGA X100P), to see if
you computer detect card:
1. if not, try this card in another
All,
I'm having trouble getting the X100P working.
Lsmod shows :
zaptel179808 0
I did a .
# modprobe zaptel
and here is my zaptel.conf (comments omitted)
__SNIP__
fxsks=1
loadzone = us
defaultzone=us
__SNIP__
Here is zapata.conf
__SNIP__
[trunkgroups]
[channels]
On Fri, 2004-06-18 at 14:57, Adam Lewis wrote:
All,
I'm having trouble getting the X100P working.
Lsmod shows :
zaptel179808 0
I did a .
# modprobe zaptel
and here is my zaptel.conf (comments omitted)
__SNIP__
fxsks=1
loadzone = us
defaultzone=us
Don't you need a 'modprobe wcfxs' also?
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Adam Lewis
Sent: 18 June 2004 14:57
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Problems with X100P
All,
I'm having trouble getting the X100P working
That did it. Thanks!
Adam
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason Williams
Sent: Friday, June 18, 2004 10:08 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Problems with X100P
At 09:57 18/06/2004 -0400, you wrote:
I did
David J Carter [EMAIL PROTECTED] wrote:
Don't you need a 'modprobe wcfxs' also?
Not for an FXO device, such as the X100P, no.
--
_/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/
_/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h
_/ _/_/ _/ _/ _/_/
12 matches
Mail list logo
