Hi all
I have a problem with an tdm400 with 2 modules 1 fxo 1 fxs it just
doesnt load the fxs module i dunno why...
zaptel.conf
loadzone=es
defaultzone=es
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
On Mon, Feb 07, 2005 at 11:16:05PM -0600, Eric Rees wrote:
Has anyone seen this message trying to install an TDM400.. spurious
8259A interrupt: IRQ7
Not sure what to has to do with your system, but I read somewhere that
it is related to how the original interrupt controllers worked. If a
card
On Mon, 7 Feb 2005 23:16:05 -0600, Eric Rees [EMAIL PROTECTED] wrote:
Has anyone seen this message trying to install an TDM400.. spurious
8259A interrupt: IRQ7
This error happens after I do a modprobe wctdm and then the system
hangs. I am installing this in an Asus motherboard with a VIA
Has anyone seen this message trying to install an TDM400.. spurious
8259A interrupt: IRQ7
I used to get this message a lot on my computer (before I even heard
of Asterisk, mind you). When I looked into it and asked people
questions, I was told that it is a harmless message.
I even get
Has anyone seen this message trying to install an TDM400.. spurious
8259A interrupt: IRQ7
This error happens after I do a modprobe wctdm and then the system
hangs. I am installing this in an Asus motherboard with a VIA P4M266
chipset.
___
I recently swapped 2 FXO modules on to what had previously been a 4 FXS
version of the TDM400 board. The FXS ports are recognized - the FXO
ports don't appear to be recognized (ie modprobe wcfxo and ztcfg both
say channel 1 isn't there). Has anyone experienced this problem? All
software is
regards
Lamine
- Original Message -
From: Steven P. Donegan [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Monday, December 27, 2004 6:01 PM
Subject: [Asterisk-Users] TDM400 problem
I recently swapped 2 FXO modules on to what had previously been a 4 FXS
version
they are placed on your TDM400.
Best regards
Lamine
- Original Message -
From: Steven P. Donegan [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Monday, December 27, 2004 6:01 PM
Subject: [Asterisk-Users] TDM400 problem
I recently swapped 2 FXO modules on to what had previously been a 4