Hello
I have capi 0.3.5 with fritz card and:
When i try to dialout i have this message in from capi debug :
CAPI Debugging Enabled
CLI -- Executing AnswerSIP/478-3f3f in new stack
--
Since capi is not even really supported by the guy who wrote it I'd
suggest you get a zaphfc card, like the I-tec ISDN-128, which could
simplify your task a lot.
:)
cheers Micha
On 4/21/05, Pawe Staszewski [EMAIL PROTECTED] wrote:
Hello
I have capi 0.3.5 with fritz card and:
On Thu, 2005-04-21 at 12:09 +0200, Pawe Staszewski wrote:
Hello
I have capi 0.3.5 with fritz card and:
When i try to dialout i have this message in from capi debug :
CAPI Debugging Enabled
*CLI -- Executing Answer(SIP/478-3f3f, ) in new stack
-- Executing
SNIP
== DISCONNECT_IND PLCI=0x101 REASON=0x3481
== No one is available to answer at this time
How changing from CAPI to a zaphfc card will correct
this error I don't
know, and problably neither does the person who
suggested it.
REASON 0x3481 is Unallocated (unassigned) number. =
Wrong
Hello
I live in poland and :
local numbers are: 752 7 digits
zone prefix: 32
country prefix: 48
And i must add that i am behind a local PBX Alcatel 4200E
Configured isdn port with msn 7523071
Why
Pawe Staszewski wrote:
Hello
I live in poland and :)
local numbers are: 752 (7 digits)
zone prefix: 32
country prefix: 48
And i must add that i am behind a local PBX (Alcatel 4200E)
Configured isdn port with msn 7523071
Why dial in is working but dial-out not ... ??
maybe your local PBX
Hello
i try with 0 and
-- Executing AnswerSIP/478-c9a2 in new stack
-- Executing DialSIP/478-c9a2 CAPI/7523071:07522333 in new stack
-- data = ""
-- capi request omsn = 7523071
== found capi with omsn = 7523071
Pawe Staszewski wrote:
Hello
i try with 0 and
-- Executing Answer(SIP/478-c9a2, ) in new stack
-- Executing Dial(SIP/478-c9a2, CAPI/7523071:07522333) in new stack
-- data = 7523071:07522333
-- capi request omsn = 7523071
== found capi with omsn = 7523071
== CAPI Call