Hi,
I configured openh323_v1_18_0, pwlib_v1_10_0 and
asterisk-oh323-0.7.3.
I can call inbound and outbound.
But early media is not working in outboubd.
Regards,
Jason.
oh323.conf
==
[general]
listenPort=1720
connectPort=1720
tcpStart=1
tcpEnd=2
I am a a little confused on how to get h323 working on asterisk. Could you
please point me towards specific resources you used? voip-info.org seems to
keep me in a loop of info.
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users
Hi im running several gentoo servers with Asterisk, only using IAX2
and SIP. Recently we decided to implement h323. All the necessary
dependences for oh323-0.7.3 were installed by portage (package manager
of Gentoo distro), including openh323, pwlib etc. The module is
successfully loaded (load
Hi,
I have 2 h323-gateway (clarent-h323 cisco
AS5x00-h323) with different fastStart/h245Tunneling
mode configuration.
I'm using fedora core 1 with
- asterisk-1.0.9
- asterisk-oh323-0.6.6
Anyone know how to configure oh323.conf with multiple
h323-gateway ?
regards,
we got this installation :
WinSip(demo version) - ser(radius accounting) - asterisk(from sip to
h323 channel) - gsm gateway(with 32 sims in it)
we configured winsip to make 28 calls like from 28 different sip
accounts, to 28 different cellular phones numbers
after the first ten :
--
ok, they let me know I'm an idiot, maybe
outboundMax=10
has something to do with it
after the first ten :
-- Executing Dial(SIP/5060-081925b0,
OH323/[EMAIL PROTECTED]) in new stack
-- H.323 call to [EMAIL PROTECTED] with codec(s) alaw
-- Called [EMAIL PROTECTED]
we get :
i've compiled openh323 (from openh323-Janus_patch4-src.tar) and pwlib( from pwlib-Janus_patch4-src.tar) but when i tried to compile asterisk-oh323-0.7.1... it gave error like that there is no member "cid" in structure (chan_oh323.c ) can anyone help me to resolve this
hello
i try to call from sip phone on asteris to open phone
on GnuGK.
can any one tell me why it is saying
chan_oh323.c:2501 ast_oh323_new: Internal channel
initialization failed. Bad binary?
Mar 16 13:28:46 WARNING[5963]: chan_oh323.c:2727
oh323_request: Failed to create new H.323 private
Discussion
Assunto: Re: RES: [Asterisk-Users] chan_oh323 gatekeeper
That's correct, just send FXO calls to the Asterisk box. Calls from H.323
sources will go into the context specified in the oh323.conf file.
Adi
On Wed, 5 Jan 2005, Humberto Aicardi wrote:
You're right it works, but how about
Hi folks,
Until now I have used only SIP IAX2 with success and understand
them pretty well. The point is that someone has asked me to configure an *
box for them, the problem is that they want to use H.323. I have already
compiled and tested the chan_oh323 with asterisk and works. The
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Humberto
Aicardi
Sent: Wednesday, January 05, 2005 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] chan_oh323 gatekeeper
Hi folks,
Until now I have used
, January 05, 2005 5:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] chan_oh323 Module for Asterisk
If anyone in the list has a working version of the chan_oh323.so file
for Fedora Core 2 and Redhat, can he email the same to the list as
attachment
]] On Behalf Of Kanuri,
Seshu (Company IT)
Sent: Wednesday, January 05, 2005 5:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] chan_oh323 Module for Asterisk
If anyone in the list has a working version of the chan_oh323.so file
for Fedora Core 2 and Redhat, can
Until now I have used only SIP IAX2 with success and understand
them pretty well. The point is that someone has asked me to configure an *
box for them, the problem is that they want to use H.323. I have already
compiled and tested the chan_oh323 with asterisk and works. The problem is
Adi Linden
Enviada em: Wednesday, January 05, 2005 9:28 PM
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Assunto: Re: [Asterisk-Users] chan_oh323 gatekeeper
Until now I have used only SIP IAX2 with success and understand
them pretty well. The point is that someone has
That's correct, just send FXO calls to the Asterisk box. Calls from H.323
sources will go into the context specified in the oh323.conf file.
Adi
On Wed, 5 Jan 2005, Humberto Aicardi wrote:
You're right it works, but how about receiving calls, how can you register
so the FXO gateways knows
amna saleem a écrit :
I have asterisk version 1.0.0,have comipled pwlib version 1.5.2 ;and
openh323 version 1.12.2.When I try to build asterisk-oh323 version
0.5.9 or 0.5.10 ,I get the following error :
make[1]: *** [chan_oh323.o] Error 1
make[1]: Leaving directory
I have asterisk version 1.0.0,have comipled pwlib version 1.5.2 ;and
openh323 version 1.12.2.When I try to build asterisk-oh323 version
0.5.9 or 0.5.10 ,I get the following error :
make[1]: *** [chan_oh323.o] Error 1
make[1]: Leaving directory `/usr/src/asterisk-oh323-0.6.2/asterisk-driver'
I have asterisk version 1.0.0,have comipled pwlib version 1.5.2 ;and
openh323 version 1.12.2.When I try to build asterisk-oh323 version
0.5.9 or 0.5.10 ,I get the following error :
make[1]: *** [chan_oh323.o] Error 1
make[1]: Leaving directory `/usr/src/asterisk-oh323-0.6.2/asterisk-driver'
make:
have asterisk version 1.0.0,have comipled pwlib version 1.5.2 ;and
openh323 version 1.12.2.When I try to build asterisk-oh323 version
0.5.9 or 0.5.10 ,I get the following error :
make[1]: *** [chan_oh323.o] Error 1
make[1]: Leaving directory `/usr/src/asterisk-oh323-0.6.2/asterisk-driver'
make:
I'm trying to make the chan_h323 in /usr/src/asterisk/channels/h323
But I'm getting all kinds of errors about PWLIB... I built using the newest
PWLIB and OpenH323 from CVS
Error log from make below
make
g++ -g -c -fno-rtti -o ast_h323.o -march=i686 -DPBYTE_ORDER=PLITTLE_ENDIAN
-DNDEBUG
I'm trying to make the chan_h323 in /usr/src/asterisk/channels/h323
But I'm getting all kinds of errors about PWLIB... I built using the newest
PWLIB and OpenH323 from CVS
Error log from make below
make
g++ -g -c -fno-rtti -o ast_h323.o -march=i686 -DPBYTE_ORDER=PLITTLE_ENDIAN
-DNDEBUG
Huddleston, Robert schrieb:
I'm trying to make the chan_h323 in /usr/src/asterisk/channels/h323
But I'm getting all kinds of errors about PWLIB... I built using the newest
PWLIB and OpenH323 from CVS
Error log from make below
...
Please start a new thread next time when asking about a new
topic!
Roger Schreiter wrote:
Hi,
there are some posts about that topic, but
unfortunatelly I do not yet know what to do.
I find every call in Master.csv, but those coming in
via chan_oh323.
In oh323.conf I have
accountcode=oh323
but there is no other file in the directory cdr-csv
than Master.csv.
Can
Michael Manousos schrieb:
...
In oh323.conf, set:
amaFlags=billing
Yes, that solved my problem.
Thanks!
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
Hi,
there are some posts about that topic, but
unfortunatelly I do not yet know what to do.
I find every call in Master.csv, but those coming in
via chan_oh323.
In oh323.conf I have
accountcode=oh323
but there is no other file in the directory cdr-csv
than Master.csv.
Can anyone give me any hint,
Hi,
chan_oh323.so: undefined
symbol: __use_ast_pthread_create_instead__
is not a bug, it's a hint:
use ast_pthread_create instead [what your were using]
and means:
replace in asterisk-oh/asterisk-driver/chan_oh323.c
at line 3764
pthread_create
by
ast_pthread_create
Roger.
Hi Roger,
Thank you very much. It is working!
Regards,
Balgaa
- Original Message -
From: Roger Schreiter [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, August 26, 2004 4:16 AM
Subject: [Asterisk-Users] chan_oh323: __use_ast_pthread_create_instead__
(was: chan_oh323 loading
I have compiled chan_oh323 and when starting * I get the following.
[chan_oh323.so]Aug 15 12:40:00 WARNING[1076245120]: loader.c:242
ast_load_resource: /usr/lib/asterisk/modules/chan_oh323.so: undefined
symbol: __use_ast_pthread_create_instead__
Aug 15 12:40:00 WARNING[1076245120]: loader.c:423
You might try setting P_PTHREADS=1 in your Makefile.
I'm not actually certain if this will work, but it can't hurt anything.
Ryan Wilkins
On Sun, 15 Aug 2004, Krystian Filiks wrote:
I have compiled chan_oh323 and when starting * I get the following.
[chan_oh323.so]Aug 15 12:40:00
Hi all!
Any one that could give me some input on the problem below?
regards
Krystian
Krystian Filiks wrote:
I have compiled chan_oh323 and when starting * I get the following.
[chan_oh323.so]Aug 15 12:40:00 WARNING[1076245120]: loader.c:242
ast_load_resource:
Would the command make P_PTHREADS=1 opt do the job?
Krystian
Ryan Wilkins wrote:
You might try setting P_PTHREADS=1 in your Makefile.
I'm not actually certain if this will work, but it can't hurt anything.
Ryan Wilkins
On Sun, 15 Aug 2004, Krystian Filiks wrote:
I have compiled chan_oh323 and
No.
Look in the Makefile of the oh323 driver source.
Search down through the file for #P_PTHREADS=1 and remove the #.
Then recompile. See if that helps your situation any.
It may.. or it may not.
On Sun, 15 Aug 2004, Krystian Filiks wrote:
Would the command make P_PTHREADS=1 opt do the job?
I have searched through the Makefile and the configure files and could
not find any instance of P_PTHREADS.
Should I put it there? in that case where?
Ryan Wilkins wrote:
No.
Look in the Makefile of the oh323 driver source.
Search down through the file for #P_PTHREADS=1 and remove the #.
Then
Out of my league.. It may.. You can always try it.
On Sun, 15 Aug 2004, Krystian Filiks wrote:
I think that I found it, I'm compiling PWLIB with ./configure
--with-pthreads
Do you think this would do it?
___
Asterisk-Users mailing list
[EMAIL
Ryan Wilkins wrote:
Maybe you are not running the latest version of oh323..
I'm running 'asterisk-oh323-0.6.3a'.
That is what I'm trying to get going as well with openH323 1.13.5 and
pwlib 1.6.6
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Hello,
has anybody managed to register with two gatekeepers using
chan_oh323?
Lars
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
Hello,
I have been trying for a while to make the oh323 channel working but i didnt manage, i have everything compiled correctly but asterisk find somethign like an "undefined symbol" when it loads the oh323 module...
i dont know if u have seen this before, I am deseperate to find the solution ,
ldconfig, check that /etc/ld.so.conf have path to where
oh323 library is
and then run ldconfig
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Fathallah
SoumayaEnviado el: Martes, 13 de Julio de 2004 12:27
p.m.Para: [EMAIL PROTECTED]Asunto: Re:
[Asterisk-Users
Hi,
Hello,
I have been trying for a while to make the oh323 channel
working but i didnt manage, i have everything compiled
correctly but asterisk find somethign like an undefined
symbol when it loads the oh323 module...
Put the path to your openh323 libraries in your LD_LIBRARY_PATH
] [mailto:[EMAIL PROTECTED] En nombre de Fathallah SoumayaEnviado el: Martes, 13 de Julio de 2004 12:27 p.m.Para: [EMAIL PROTECTED]Asunto: Re: [Asterisk-Users] chan_oh323
Hello,
I have been trying for a while to make the oh323 channel working but i didnt manage, i have everything compiled correctly
hello,
Can you please tell me what is the name of the startup script? which file is it and where should I make the change?
Thank you very much
SoumayaJeremy Jones [EMAIL PROTECTED] wrote:
Hi, Hello, I have been trying for a while to make the oh323 channel working but i didnt manage, i have
Michael Manousos wrote:
This is not supported. Currently, the stack (OpenH323) assumes
the existence of one gatekeeper (or no gatekeeper).
Thanks, thought so, just asked for clearance.
Then I'll have to stack the gatekeepers I assumeoh boy
Lars
--
Lars Degenhardt
phon: +49 76814749263| mobile:
Hi,
I have asterisk connected to PSTN via H.323 gateway via chan_oh323.
Incoming calls to SIP extensions work, but SIP message 486 busy here from a
busy extension isn't correctly forwarded to H.323.
As a result, a caller from the H.323 side calling a busy SIP extension gets some
rings and then
:[EMAIL PROTECTED] Behalf Of argnet
Sent: Tuesday, June 10, 2003 5:19 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] chan_oh323
Hi,
does anybody manage to get music-on-hold with inaccess oh323 driver?
Statement like : exten = 10,1,Dial(OH323/xx,mt) works (dials the xx number)
but no music
Subject: RE: [Asterisk-Users] chan_oh323
Hello all,
can someoen advise what is the exact syntaxt format for the latest OH323
in
extensions.conf.
we had error when use the chan_oh323. It seems it is a syntaxt error. But
we
cannot figure out.
Please advise if you could.
Thanks
Hi,
I've got a big delay between the caller and the
callee.
I use asterisk-oh323 drivers how can I configure
oh323.conf in order to have the best delay ?
Thanks
Rattana
Hello,
I downloaded the chan_oh323. I experience few
problems:
When I dial from console I get all the object
creation and deletion message, and when a call get connected it gives me the
following output.
Wrong Pitch 1st subfr. ! ! Wrong
Pitch 1st subfr. ! !Wrong Pitch 1st subfr. ! !
,Answer
exten = s,5,Background(conf-getconfno)
exten = t,6,Goto(s,5)
exten = 1234,1,Meetme,1234|ps|9888
- Original Message -
From: Michael Manousos [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 4:40 PM
Subject: Re: [Asterisk-Users] chan_oh323 + dtmf
Chee Foong
PROTECTED]
Sent: Wednesday, August 06, 2003 4:40 PM
Subject: Re: [Asterisk-Users] chan_oh323 + dtmf
Chee Foong wrote:
Hello all,
I have a cisco AS5300 which is register with a gatekeeper and a Asterisk
server also register with the gatekeeper.
PSTN AS5300 Gatekeeper Asterisk
I set up
Hello all,
I have a cisco AS5300 which is register with a
gatekeeper and a Asterisk server also register with the gatekeeper.
PSTN AS5300 Gatekeeper
Asterisk
I set up a conference room on the Asterisk sever
(Room No 1234).
I try to call from PSTN to AS5300, The AS5300 will
Chee Foong wrote:
Hello all,
I have a cisco AS5300 which is register with a gatekeeper and a Asterisk
server also register with the gatekeeper.
PSTN AS5300 Gatekeeper Asterisk
I set up a conference room on the Asterisk sever (Room No 1234).
I try to call from PSTN to AS5300, The
Message -
From: Michael Manousos [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 4:40 PM
Subject: Re: [Asterisk-Users] chan_oh323 + dtmf
Chee Foong wrote:
Hello all,
I have a cisco AS5300 which is register with a gatekeeper and a
Asterisk
server also
Hi,
Can someone confirm the format of the Dial string for a H.323 gateway using
chan_oh323? The format I have working is:
exten = 5000,1,Dial(OH323/h323:[EMAIL PROTECTED])
I have 5000 as a speed dial - the extension functions, but the voice
latency within the call to the analog phone
Jordan Peterson wrote:
My apologies if this question has been answered previously. However, I
found that it was nearly impossible to search and find since anything
can cause a segmentation fault.
Problem. When Asterisk is booting up the h323 modules and a client
tries to connect before
My apologies if this question has been answered previously. However, I
found that it was nearly impossible to search and find since anything
can cause a segmentation fault.
Problem. When Asterisk is booting up the h323 modules and a client
tries to connect before Asterisk/h323 is finished
Andrey Tyushkin wrote:
Hello
I have the following problem using chan_oh323
I have DialGate 2160 for SystemBas (www.sysbas.com
http://www.sysbas.com) connected to PSTN
(H.323 to FXO/FXS gateway)
when i try to make call form one pstn phone to other trough asterisk or
when i make call from
57 matches
Mail list logo
