to dear martijn,
i made every possible change i can make
i have a TDM400P Zap card...
i had connected PSTN line to FXO Kewlstart at channel 1.
and analog phone to FXS Kewlstart at Channel 4.
i can hear continous ring tone when i hook up the receiver.
plz have a look at my confs.
my
Hi,
I've never used fxs/fxo modules, only E1 cards so I'm not entirely
sure. However, this log:
*CLI -- Starting simple switch on 'Zap/1-1'
-- Executing Dial(Zap/1-1, Zap/1/6998256) in new stack
-- Called 1/6998256
-- Zap/1/6998256-busy-1013475805 is busy
-- Hungup
I've setup * with TDM400P w/1 FXS, 1 FXO modules.
I've one analog phone connected to TDM400P FXS module, 1 PSTN line to
one of the FXO module(ZAP) , and IP phone connected to asterisk on
LAN.
The calls between SIPs and zap phone (fxs) are OK. But 2 issues
cannot be solved:
1. To dial to PSTN
On Thu, Mar 31, 2005 at 05:05:21PM +0500, Muhammad Haris wrote:
The calls between SIPs and zap phone (fxs) are OK. But 2 issues
cannot be solved:
1. To dial to PSTN via zap phone, the setup in extensions.conf with
the following
exten = _Nxx, 1, zap/1
doesn't work.
I think
On Mar 31, 2005 1:05 PM, Muhammad Haris [EMAIL PROTECTED] wrote:
I've setup * with TDM400P w/1 FXS, 1 FXO modules.
I've one analog phone connected to TDM400P FXS module, 1 PSTN line to
one of the FXO module(ZAP) , and IP phone connected to asterisk on
LAN.
The calls between SIPs and zap