Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-18 Thread Stephen Reese
As a last resort (if qualify doesn't help), you could enter this (global) to increase the timeout on UDP translations: ip nat translation udp-timeout 300 (or greater if you prefer) It is likely a NAT timeout issue. When you call outbound, you 'reactivate' the SIP session in your NAT device,

Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-18 Thread Darryl Dunkin
Discussion; Darryl Dunkin Subject: Re: [asterisk-users] Cisco 7960 not always receiving incoming calls I tried increasing the value and even set it to never and added the qualify line but that did not help. Do I need to poke any holes in the firewall on the nat device for the udp traffic to stay

Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-18 Thread Stephen Reese
Message- From: Stephen Reese [mailto:[EMAIL PROTECTED] Sent: Saturday, October 18, 2008 14:41 To: Asterisk Users Mailing List - Non-Commercial Discussion; Darryl Dunkin Subject: Re: [asterisk-users] Cisco 7960 not always receiving incoming calls I tried increasing the value and even set

Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-17 Thread Stephen Reese
On Wed, Oct 15, 2008 at 7:57 PM, Stephen Reese [EMAIL PROTECTED] wrote: I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone

Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-17 Thread Darryl Dunkin
7960 not always receiving incoming calls On Wed, Oct 15, 2008 at 7:57 PM, Stephen Reese [EMAIL PROTECTED] wrote: I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I

Re: [asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-17 Thread Darryl Dunkin
] On Behalf Of Darryl Dunkin Sent: Friday, October 17, 2008 17:28 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Cisco 7960 not always receiving incoming calls It is likely a NAT timeout issue. When you call outbound, you 'reactivate' the SIP session in your NAT device, allowing

[asterisk-users] Cisco 7960 not always receiving incoming calls

2008-10-15 Thread Stephen Reese
I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another