On 08/04/2014 03:03 PM, David Duffett wrote:
Please come back to let us know if this actually does fix the issue.
So far so good the external voltage supply for the OpenVOX card has arrived and
I can confirm
that the BT Versatility PBX worked like a charm. DAHDI channel has been
configured
Great news!
On Wednesday, August 20, 2014, Roberto Fichera ker...@tekno-soft.it wrote:
On 08/04/2014 03:03 PM, David Duffett wrote:
Please come back to let us know if this actually does fix the issue.
So far so good the external voltage supply for the OpenVOX card has
arrived and I can
On 08/03/2014 04:37 PM, David Duffett wrote:
Does the BT Versatility system you are trying to connect require a voltage on
the line, which it would normally get
from the BT connection?
Some BRI equipment does, and some does not, and it may be the Panasonic
system you refer to is happy
If the OpenVox card can supply the voltage, then it will a configuration
option (probably in hardware, like some jumpers) of the card itself.
I was going to point you to the Xorcom Astribank, which I know supplies the
required voltage.
All the best,
David
On 4 Aug 2014 13:16, Roberto Fichera
On 08/04/2014 01:21 PM, David Duffett wrote:
If the OpenVox card can supply the voltage, then it will a configuration
option (probably in hardware, like some
jumpers) of the card itself.
Yep! The OpenVOX card has a jumper for each port and a connector where to
insert the external voltage
Please come back to let us know if this actually does fix the issue.
On 4 Aug 2014 14:36, Roberto Fichera ker...@tekno-soft.it wrote:
On 08/04/2014 01:21 PM, David Duffett wrote:
If the OpenVox card can supply the voltage, then it will a configuration
option (probably in hardware, like some
On 08/04/2014 03:03 PM, David Duffett wrote:
Please come back to let us know if this actually does fix the issue.
Yep! Sure!
On 4 Aug 2014 14:36, Roberto Fichera ker...@tekno-soft.it
mailto:ker...@tekno-soft.it wrote:
On 08/04/2014 01:21 PM, David Duffett wrote:
If the OpenVox
Hi, it seems have problem with physical issue layer 1, first check wiring
connection, by the way you can check with card led (If ISDN plugs into the
port, the LED will not blink, but in red color.) after dahdi alarm status, and
dahdi restart command.
At last should be signalling mode to
Does the BT Versatility system you are trying to connect require a voltage
on the line, which it would normally get from the BT connection?
Some BRI equipment does, and some does not, and it may be the Panasonic
system you refer to is happy without the voltage, while, perhaps, the BT
Versatility
Il 01/08/2014 21.13, Richard Mudgett ha scritto:
On Fri, Aug 1, 2014 at 1:26 PM, ker...@tekno-soft.it
mailto:ker...@tekno-soft.it wrote:
On Fri, 1 Aug 2014 12:39:18 -0500, Richard Mudgett wrote:
On Fri, Aug 1, 2014 at 12:03 PM, Roberto Fichera wrote:
snip
Does anyone
Il 03/08/2014 16.16, Mc GRATH Ricardo ha scritto:
Hi, it seems have problem with physical issue layer 1, first check wiring
connection, by the way you can check with card led (If ISDN plugs into the
port, the LED will not blink, but in red color.) after dahdi alarm status,
and dahdi
Il 03/08/2014 16.37, David Duffett ha scritto:
Does the BT Versatility system you are trying to connect require a
voltage on the line, which it would normally get from the BT connection?
Mmmhhh!!! Good question! I'll check the doc once again.
Some BRI equipment does, and some does not, and
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via
BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone PBX,
it's a
Panasonic model, which works fine connected to the same port. The BT connected
to a UK
BT BRI line works
On Fri, Aug 1, 2014 at 12:03 PM, Roberto Fichera ker...@tekno-soft.it
wrote:
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box
via BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone
PBX, it's a
Panasonic model, which
On Fri, 1 Aug 2014 12:39:18 -0500, Richard Mudgett wrote:
On Fri, Aug 1, 2014 at 12:03 PM, Roberto Fichera wrote:
Hi All,
Ive a BT Versatility PBX that I want to connect to my asterisk
11.9.0 box via BRI port in NT
mode but actually I wasnt able to get it working. Ive another
standalone PBX,
On Fri, Aug 1, 2014 at 1:26 PM, ker...@tekno-soft.it wrote:
On Fri, 1 Aug 2014 12:39:18 -0500, Richard Mudgett wrote:
On Fri, Aug 1, 2014 at 12:03 PM, Roberto Fichera wrote:
snip
Does anyone know how can I solve this problem?
You might want to try bri_net_ptmp since bri_net is for
16 matches
Mail list logo