--- On Tue, 8/5/08, Atis Lezdins [EMAIL PROTECTED] wrote:
Have you tried powering it on, while holding reset button?
Yes, several times. I contacted Grandstream's helpdesk and they told me to keep
the reset button pressed while I plug the power off and back on again. I even
tried keeping it
I realize this may be slightly off-topic but I'm wondering if someone here can
lend me a hand.
One of my GXW4008 has gone unconfigurable via standard HTTP (refuses
connection) and I can't use the built-in IVR because I had previously disabled
the keypad update feature. So I'm stuck with just
Never mind. I set the wrong baud rate. The right values are 115200-8-N-1-No
flow control. However, the serial connection is as good or as useless as the
telent connection. I have no way to restore factory settings.
--- On Tue, 8/5/08, Vieri [EMAIL PROTECTED] wrote:
I realize this may be
On Tue, Aug 5, 2008 at 6:29 PM, Vieri [EMAIL PROTECTED] wrote:
Never mind. I set the wrong baud rate. The right values are 115200-8-N-1-No
flow control. However, the serial connection is as good or as useless as the
telent connection. I have no way to restore factory settings.
--- On Tue,
