das sandesh wrote:
Can any one share any ideas or opinions?
Sandesh,
You'll need to create a context called park-dial and then put logic into
it on how to handle a call. I have the following in my dial plan:
;***
;* If the call that was parked, fails
Hi
We are facing a problem for orphaned parked calls, we have the following
config:
asterisk -1.4.22.1
dahdi-linux-complete-2.2.0.2+2.2.0
and when we get an incoming call and after it gets parked, after some set
time (here its 2 min), it goes back to the operator, but the problem is that
Using FreePBX, is there a way to play a beep sound when you are connected to a
parked
call? Right now, it's dead silence and we can't tell if the call has
been connected.
--
_
-- Bandwidth and Colocation Provided by
hin lee wrote:
Using FreePBX, is there a way to play a beep sound when you are
connected to a parked call? Right now, it's dead silence and we can't
tell if the call has been connected.
I don't know about FreePBX, but under the features.conf, there is:
courtesytone = local/stutter;
Thank you Doug! I added courtesytone = beep and that worked!
From: Doug Lytle supp...@drdos.info
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Fri, February 12, 2010 6:40:17 AM
Subject: Re: [asterisk-users
- Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Fri, February 12, 2010 6:40:17 AM
Subject: Re: [asterisk-users] parked calls
hin lee wrote:
Using FreePBX, is there a way to play a beep sound when you are
connected to a parked call? Right now, it's dead silence and we can't
I have changed the features.conf file, yes.
And I put this in my extensions.conf :
include = parkedcalls
Is it better to put exten = 90,1,park() into my dialplan ?
Greetingz,
Jonas.
On Thu, 2009-05-14 at 16:08 -0500, Danny Nicholas wrote:
Did you change 700 to 90 in features.conf? I’d put
Subject: Re: [asterisk-users] Parked Calls Problem
I have changed the features.conf file, yes.
And I put this in my extensions.conf :
include = parkedcalls
Is it better to put exten = 90,1,park() into my dialplan ?
Greetingz,
Jonas.
On Thu, 2009-05-14 at 16:08 -0500, Danny Nicholas wrote:
Did
openSuse 11
Asterisk 1.4.23.1
Asterisk GUI 2.0
When parking a call it does not tell me what extension it parked the
call on.
I think I read something in the mail list that mentioned a problem with
call parking and one of the Asterisk 1.4s.
Is 1.4.23.1 one of those version having issues?
Brent Vrieze wrote:
openSuse 11
Asterisk 1.4.23.1
Asterisk GUI 2.0
When parking a call it does not tell me what extension it parked the
call on.
I think I read something in the mail list that mentioned a problem with
call parking and one of the Asterisk 1.4s.
Is 1.4.23.1 one of those
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked Calls Problem
Brent Vrieze wrote:
openSuse 11
Asterisk 1.4.23.1
Asterisk GUI 2.0
When parking a call it does not tell me what extension it parked the
call on.
I think I read something
.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Lyle Giese
Sent: Thursday, May 14, 2009 3:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked Calls Problem
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked Calls Problem
I have the same problem with Asterisk 1.4.24 and a Grandstream GXP2020
SIP-phone.
I want to park a call by pressing the 'TRANSFER' and then 90. My parking
lots are from 91 till 95.
The call is parked
Ok cheers.
Any idea when 1.6 goes stable for prod?
- Original Message
From: Mike l...@virtutel.ca
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, 24 April, 2009 0:54:59
Subject: Re: [asterisk-users] Parked calls for multiple
carl Lougher wrote:
Ok cheers.
Any idea when 1.6 goes stable for prod?
Theoretically it already has, however as was the case with 1.4, I
suggest you tread very carefully when it comes to migrating to 1.6.
___
-- Bandwidth and Colocation Provided by
Hi,
Is there any method of getting call park working on different numbers for
different customers on the same asterisk server?
Currently running asterisk 1.4.23.1
Cheers!!
___
-- Bandwidth and Colocation Provided by
Subject: [asterisk-users] Parked calls for multiple customers
Hi,
Is there any method of getting call park working on different numbers for
different customers on the same asterisk server?
Currently running asterisk 1.4.23.1
Cheers
Darrick Hartman wrote:
I know the call parking feature changed in 1.4.23.1 to fix some serious
issues. I'm seeing a major change though which I find disturbing.
A person parks a call by transferring it to the parking position (700).
When the timeout value is reached, the call is NOT
Leif Madsen wrote:
Darrick Hartman wrote:
I know the call parking feature changed in 1.4.23.1 to fix some serious
issues. I'm seeing a major change though which I find disturbing.
A person parks a call by transferring it to the parking position (700).
When the timeout value is reached, the
I know the call parking feature changed in 1.4.23.1 to fix some serious
issues. I'm seeing a major change though which I find disturbing.
A person parks a call by transferring it to the parking position (700).
When the timeout value is reached, the call is NOT returned to that
device, but
Can anyone explain parked calls?
I've run so many tests over the last few hours I'm totally confused. Half the
time the call times out and returns back to the user that dialed it, through
the same context it was originated from.
The other half it returns to the park-dial context with a
Forgot to mention, I'm running asterisk 1.4.21.2
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Mann
Sent: Wednesday, September 17, 2008 2:32 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Parked
Using the default features.conf setup, if I include parkedcalls in my dialplan,
and a call gets parked, and times out, where does the call go?
Does it go to a timeout extension in parked calls, or does it go to a timeout
extension in the original context?
(Using an AEL based dialplan similar
Jeremy Mann wrote:
Using the default features.conf setup, if I include parkedcalls in my
dialplan, and a call gets parked, and times out, where does the call go?
I can't tell you about AEL, but I have the following:
[park-dial]
;
; Don't drop unanswered
-Commercial Discussion
Subject: Re: [asterisk-users] Parked Calls
Jeremy Mann wrote:
Using the default features.conf setup, if I include parkedcalls in my
dialplan, and a call gets parked, and times out, where does the call go?
I can't tell you about AEL, but I have the following:
[park-dial
Jeremy Mann wrote:
Which would imply you have parked calls, upon timeout, going to a different
context. Where did you define that?
I didn't, I believe it's hard coded.
It was being displayed on the console way back in v1.2 about calls being
sent to park-dial and no timeout being
to another extension/context?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: Tuesday, September 16, 2008 2:15 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked Calls
Jeremy Mann wrote:
Which
Jeremy Mann wrote:
I just tested without any t extension, and the parked call times out and
rolls back to the user that parked it. I need a way to override this to roll
back to my operator.
Actually, the description on my entry is as follow:
Hi list,
sorry if this has been discussed in the past and is also posted twice to the
list,
but I couldn't find anything wise about it.
Since we had some trouble with the builtin hold function of some (all?) SNOM
320/360
phones, we decided to use the call parking feature in asterisk instead.
On Mon, 2008-02-25 at 21:03 -0500, Michelle Dupuis wrote:
I have 2 contexts in my extensions.conf: internal and external calls. I
have included the parkedcalls context in both.
Do I need to preface the include with a # symbol?
No, you do not. You simply need a like that says:
include =
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Jared Smith
Sent: Tuesday, February 26, 2008 9:46 AM
To: Asterisk Users List
Subject: Re: [asterisk-users] Parked calls - can't pickup
On Mon, 2008-02-25 at 21:03 -0500, Michelle Dupuis wrote:
I have 2
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
OCG Technical Support
Sent: Tuesday, February 26, 2008 10:02 AM
To: Asterisk Users List
Subject: Re: [asterisk-users] Parked calls - can't pickup
It looks like I have a conflict! (See results of diaplan
show below
On Tue, 2008-02-26 at 10:01 -0500, OCG Technical Support wrote:
It looks like I have a conflict! (See results of diaplan show below).
How
can I force the parkedcalls context to be matched first? (I include
parkedcalls before I define the _X. priority).
pbx*CLI dialplan show [EMAIL
I have a simple asterisk install (1.4.18), and want to use call parking. I
can successfully park a call (I see on the CLI that the call is parked to
701). Everything is pretty default.
However, I can't pickup a call from another phone. When I dial 701 from a
phone, asterisk can't find that
On Mon, 2008-02-25 at 20:03 -0500, Michelle Dupuis wrote:
However, I can't pickup a call from another phone. When I dial 701 from a
phone, asterisk can't find that extensions and notifies the person picking
up that the extension doesn't exist. (It appears that asterisk is looking
for
Did you pay attention to the following bit?
--8snip
For simple dialplans first edit features.conf as desired, then put this
into your extensions.conf
http://www.voip-info.org/wiki/index.php?page=Asterisk+config+extensions.conf:
include = parkedcalls
, February 25, 2008 8:18 PM
To: Asterisk Users List
Subject: Re: [asterisk-users] Parked calls - can't pickup
On Mon, 2008-02-25 at 20:03 -0500, Michelle Dupuis wrote:
However, I can't pickup a call from another phone. When I dial 701
from a phone, asterisk can't find that extensions
Hello everybody,
I'm trying to understand how can I set the MoH class for parked calls.
I set the incoming class for calls, and it works correctly. When I park the
call, the music on hold is ok, but when I close the communication on the
parking side, the parked call gets the default music on hold
Discussion
Subject: [asterisk-users] Parked calls and the # key
I am perplexed by this so I how someone can help me out.
On one of my servers the users began complaining that if they picked up
a parked call they could not use the # key to transfer the call. This is
a particualarly annoying issue
Of *Bruce Reeves
*Sent:* Thursday, January 11, 2007 2:29 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [asterisk-users] Parked calls and the # key
I am perplexed by this so I how someone can help me out.
On one of my servers the users began complaining
Bruce Reeves wrote:
A fix was posted to the svn version of 1.2 and 1.4. The actual
revision number I do not recall.
Bruce,
Have you had a chance to test? I've been looking for the last hour for
the bug report I thought you posted earlier this week, but haven't found
anything.
Doug
--
Here is the bug: http://bugs.digium.com/view.php?id=8804
I have not tried the svn version yet, I modified my features.c file as noted
in the bug and have been running it successfully.
On 1/19/07, Doug Lytle [EMAIL PROTECTED] wrote:
Bruce Reeves wrote:
A fix was posted to the svn version of
Bruce Reeves wrote:
Here is the bug: http://bugs.digium.com/view.php?id=8804
Thank you very much!
Doug
--
Ben Franklin quote:
Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety.
.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle
Sent: Friday, January 19, 2007 12:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked calls and the # key
Bruce Reeves wrote:
Here is the bug: http
.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bruce
Reeves
Sent: Friday, January 19, 2007 12:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Parked calls and the # key
Here is the bug: http
Bruce Reeves wrote:
Here is the bug: http://bugs.digium.com/view.php?id=8804
I have not tried the svn version yet, I modified my features.c file as
noted in the bug and have been running it successfully.
Looks like I'll have to manually make the changes as well. The current
1.2 Branch
Hi List.
We have a small issue with making parked calls work with the new
Asterisk 1.4. I have an impression that this used to work with 1.2, so
its either I'm doing something wrong, or a regression. I hope its not
the latter and you can tell me what I'm doing wrong.
The setup is an Asterisk
Bruce Reeves wrote:
I am perplexed by this so I how someone can help me out.
On one of my servers the users began complaining that if they picked
up a parked call they could not use the # key to transfer the call.
This is a particualarly annoying issue since everyone has been taught
to use
The problem was actually introduced in issue 8406 in mantis, and in the SVN
release 48154. Kind of makes me feel better knowing it is not my dial plan.
I agree with the fix, but I need a way around it, since it does not apply to
my setups.
On 1/12/07, Doug Lytle [EMAIL PROTECTED] wrote:
Bruce
I am perplexed by this so I how someone can help me out.
On one of my servers the users began complaining that if they picked up a
parked call they could not use the # key to transfer the call. This is a
particualarly annoying issue since everyone has been taught to use #700 to
park calls. At
Hello everybody,
I is possible to manage multiple call parked per line
.
I mean a caller (agent) have to park more than two
call . It is possible to retrieve caller one ,two
,three, ... with a aplliction which one display the
calling parked to a PC screen or a screen phone .
Regards
Harry
Hello everybody,
I is possible to manage multiple call parked per line
.
I mean a caller (agent) have to park more than two
call . It is possible to retrieve caller one ,two
,three, ... with a aplliction which one display the
calling parked to a PC screen or a screen phone .
Regards
Harry
Hello everybody,
I is possible to manage multiple call parked per line
.
I mean a caller (agent) have to park more than two
call . It is possible to retrieve caller one ,two
,three, ... with a aplliction which one display the
calling parked to a PC screen or a screen phone .
Regards
Harry
I am having an issue when parking calls that its taking sometimes up
to 15 seconds for the annoucing position to come back. The calls come
in through a TDM04B and many times it takes at least 15 seconds for
the call position to be announced.
Thanks
--
Tom Vile
Baldwin Technology Solutions, Inc
Is there settings that can be adjusted in the
Parked calls timeout before it hangs up
i want to try and hold the call for atlest 5-10
mins ..
but holds the call for about less then
1minute?
any suggestions or ideas?
On Wed, 21 Jan 2004, [EMAIL PROTECTED] waxed:
Is there settings that can be adjusted in the Parked calls timeout before it hangs up
i want to try and hold the call for atlest 5-10 mins ..
but holds the call for about less then 1minute?
any suggestions or ideas?
Do you have an
56 matches
Mail list logo
