err... you'd set them to 'yes', right? Sorry if I'm missing the obvious.
Eric Chamberlain wrote:
You can do this with any of the Linksys SPA series ATA's or phones, just set
Make Call Without Reg and Ans Call Without Reg to no.
___
Sign up
Correct you want to set those settings to yes. Search the Voxilla
Linksys forums http:forum.voxilla.com for hotline or ringdown and
you will find several examples. The examples are mostly for the
spa3000, but the configuration is mostly the same.
You are basically setting up ip or sip uri
Greetings list,
I need to set up a point to point SIP connection between two devices without
either of them registering with a registrar/proxy/etc. at all. The devices I've
tested so far all seem to insist on having a registration before they'll make
or take calls.
One of the devices needs to
Run it with a stock OpenSER installation that will accept registrations
and acknowledge them with a 200 OK, but not actually do anything with
them.
On Tue, 25 Sep 2007, Chris Bagnall wrote:
Greetings list,
I need to set up a point to point SIP connection between two devices without
either
Run it with a stock OpenSER installation that will accept registrations
and acknowledge them with a 200 OK, but not actually do anything with
them.
I'm trying to avoid a PC at all in this scenario. If at all possible, I want an
ATA at one end and a SIP phone at the other, no other hardware
-
[EMAIL PROTECTED] On Behalf Of Chris Bagnall
Sent: Tuesday, September 25, 2007 11:34 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Point-to-Point SIP link without registration
Greetings list,
I need to set up a point to point SIP connection between two