On 7/7/06, Moises Silva [EMAIL PROTECTED] wrote:
One of the ends must be configured as pri_net and the other aspri_cpe. By the error I think the problem is with your configuration,does zttool says no alarms in spans?Post your configuration files zapata.conf
and zaptel.confRegardsOn 7/7/06,
Hi guys,I need to make a configuration to test a E1 channel, so, in the same context I created two extensions:exten = 555666,1,Dial(Zap/1/5556662)exten = 5556662,1,Dial(SIP/test)
On the E1 card I linked with a cross cable the ports 1 and 2. The leds are signaling that the connection is ok.But when
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Ralph Liebessohn
Sent: Friday, July
07, 2006 6:38 AM
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: [asterisk-users] Test E1
channel
Hi guys,
I need to make a configuration to test a E1 channel, so
I think you are really confused. I dont see a reason why dialing
555666 the call should go to client SIP/test. What you are doing is
dialing to Zap channel 1 (whatever it is) the number 5556662, so, what
do you have connected at the other end of the Zap/1 channel?
On 7/7/06, Ralph Liebessohn
, July 07, 2006 6:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Test E1 channel
Hi guys,
I need to make a configuration to test a E1 channel, so, in the same
context I created two extensions:
exten = 555666,1,Dial(Zap/1/5556662)
exten = 5556662,1
On 7/7/06, James Hawks [EMAIL PROTECTED] wrote:
When you dial directly you are bypassing
the zap and just dialing an internal extension. So that is probably why dialing
directly works. As far as the cross over cable between ports 1 and 2 I have
never attempted something like that
On 7/7/06, Moises Silva [EMAIL PROTECTED] wrote:
Oops, i missed the crossover cable part. I have used crossover cable,so it should work, butthe DNID must be complete. Wich signaling areyou using?RegardsHi Moises,I'm signalling=pri_net.
I got this error too:app_dial.c: Unable to create channel of
Newbie guess,
Don't you need to set one of the ports NT mode and the other one as TE mode?
hope it helps
Best regards,
PS. give me some feed back if it solved.
On 7/7/06, Ralph Liebessohn [EMAIL PROTECTED] wrote:
On 7/7/06, James Hawks [EMAIL PROTECTED] wrote:
When you dial directly
by Ports i mean Spans :)
On 7/7/06, Marco Mouta [EMAIL PROTECTED] wrote:
Newbie guess,
Don't you need to set one of the ports NT mode and the other one as TE mode?
hope it helps
Best regards,
PS. give me some feed back if it solved.
On 7/7/06, Ralph Liebessohn [EMAIL PROTECTED] wrote:
On
One of the ends must be configured as pri_net and the other as
pri_cpe. By the error I think the problem is with your configuration,
does zttool says no alarms in spans?
Post your configuration files zapata.conf and zaptel.conf
Regards
On 7/7/06, Marco Mouta [EMAIL PROTECTED] wrote:
by Ports
10 matches
Mail list logo
