I was trying to get my polycom phone to auto answer.
I added this to the dialplan. Used a different phone to call 22
and the phone rang it did not auto answer.
Did I miss something?
exten = 22,1,SipAddHeader(Call-Info:=\;answer-after=0)
exten = 22,n,SipAddHeader(Alert-Info: Ring Answer)
exten =
At 15:06 4/14/2008, Jerry Geis wrote:
I was trying to get my polycom phone to auto answer.
I added this to the dialplan. Used a different phone to call 22
and the phone rang it did not auto answer.
Did I miss something?
exten = 22,1,SipAddHeader(Call-Info:=\;answer-after=0)
exten =
Jerry,
Did you enable Ring Answer in the phone?
Look at your sip.cfg file for:
alertInfo voIpProt.SIP.alertInfo.1.value=Ring Answer
voIpProt.SIP.alertInfo.1.class=4/
and
ringType se.rt.enabled=1
se.rt.modification.enabled=1
DEFAULT
of the
parameters will be in the sip.cfg file.
Regards,
Derek
- Original Message -
From: C F [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Thursday, July 14, 2005 9:04 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer
] On Behalf Of dbruce
Sent: July 15, 2005 6:39 AM
To: C F; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems
Although the ipmid.cfg has been deprecated with SIP v1.5.2 (all the
parameters have been moved to sip.cfg), the firmware
C F wrote:
The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.
Sorry to tell you but that is not a correct. The IP-501 I have about 15 of
them new and they came with 1.4.2 also they do
you can also use answer as the ring type instead of ring-answer if you just
want it to pick up.
I would keep Ring_Ans the same throughout for simplicity
exten = 301,1,SetVar(_ALERT_INFO=Ring_Ans)
add an alert info type (say type 5)
alertInfo voIpProt.SIP.alertinfo.5.value=Ring_Ans
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten = 301,1,SetVar(_ALERT_INFO=Ring_Ans)
exten = 301,2,SetVar(ALERT_INFO=Ring_Ans) # Tried both combinations
exten = 301,3,Dial(SIP/5001,15)
exten = 301,4,Hangup
Sip.cfg for Polycom phone
alertInfo
On 14-Jul-05, at 2:20 PM, Chad Osmond wrote:
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten = 301,1,SetVar(_ALERT_INFO=Ring_Ans)
exten = 301,2,SetVar(ALERT_INFO=Ring_Ans) # Tried both
combinations
Try getting rid of the quotes:
exten =
Chad Osmond wrote:
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten = 301,1,SetVar(_ALERT_INFO=Ring_Ans)
exten = 301,2,SetVar(ALERT_INFO=Ring_Ans) # Tried both combinations
exten = 301,3,Dial(SIP/5001,15)
exten = 301,4,Hangup
Sip.cfg for Polycom phone
.
Regards,
Derek Bruce
- Original Message -
From: Adam Dobrin [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Thursday, July 14, 2005 4:07 PM
Subject: Re: [Asterisk-Users] Polycom Auto-Answer problems
Chad Osmond wrote
The IP-501 AFAIK comes shipped with SIP1.5.2 which does NOT use
ipmid.cfg. You have to get new *.cfg files for the ip-501 or the older
phones that run 1.5.2.
On 7/14/05, Chad Osmond [EMAIL PROTECTED] wrote:
CVS Head from 07/07/2005
I'm trying to make an IP-501 auto answer a call.
exten =
I am having a problem with Polycom auto-answer. I have the auto-answer
working between PhoneA and PhoneB, but when I try to use the intercom
between more then one phone I start having problems. PhoneA dials *3
which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but only
one will pick
Eric Rees wrote:
I am having a problem with Polycom auto-answer. I have the auto-answer
working between PhoneA and PhoneB, but when I try to use the intercom
between more then one phone I start having problems. PhoneA dials *3
which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but
, 2005 10:13 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer
Eric Rees wrote:
I am having a problem with Polycom auto-answer. I have the
auto-answer
working between PhoneA and PhoneB, but when I try to use the intercom
between
Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Polycom Auto-Answer
That's kind of what I thought, but I am trying to put together a phone
to multi-phone paging system. I all ready have and overhead paging
systems, but the powers-at-be want a phone paging system
B. J. Bomar wrote:
Take a look at
http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
few small modifications it should work like a champ on the Polycom phones.
B. J.
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample configs have both a AutoAnswer
Kristian Kielhofner wrote:
B. J. Bomar wrote:
Take a look at
http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
few small modifications it should work like a champ on the Polycom
phones.
B. J.
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample
That worked great.
-Original Message-
From: B. J. Bomar [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 01, 2005 11:20 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom Auto-Answer
Take a look at
http://www.voip-info.org/wiki-Cisco
Eric Wieling wrote:
Polycom has a much better way to do auto-answer using SIP_INFO. My
sample configs have both a AutoAnswer and a Ring_Answer (for intercom):
http://www.kriscompanies.com/modules.php?name=Downloadsd_op=viewdownloadcid=1
That's only for station to station paging, not all
Discussion
Subject: Re: [Asterisk-Users] Polycom Auto-Answer
B. J. Bomar wrote:
Take a look at
http://www.voip-info.org/wiki-Cisco+7940-7960+auto-answer+config. With a
few small modifications it should work like a champ on the Polycom phones.
B. J.
Polycom has a much better way to do auto
I have my * and polycom system setup to do
Auto-Answer for internal SIP/Staff calls, and I am running into an issue with
this and the polycom call transfer feature. * is seeing a new call come through
from the polycom and is then transferring the call over. I need to know if
there is some
22 matches
Mail list logo