Hi,
I'm experiencing the same problem with t38modem and hylafax.
My problem is that on the re-Invite phase it syncs lower than 2400 bpps and
the connection hangs on the second page.
Could you please post here the patch for asterisk 1.6.2.4 or even indicate
which is the trunk of asterisk where
On 05/04/2010 06:30 AM, Miguel Amez wrote:
I'm experiencing the same problem with t38modem and hylafax.
My problem is that on the re-Invite phase it syncs lower than 2400 bpps
and the connection hangs on the second page.
The patch I'm talking about won't affect t38modem and Hylafax usage at
Kevin P. Fleming wrote:
On 05/04/2010 06:30 AM, Miguel Amez wrote:
I'm experiencing the same problem with t38modem and hylafax.
My problem is that on the re-Invite phase it syncs lower than 2400 bpps
and the connection hangs on the second page.
The patch I'm talking about won't
Hi Kevin.
That sounds marvellous!
Maybe some of my problems come from that issue, so tomorrow's revision of
1.6.2.7 could have a solution.
Facing another problem, as I told you, I'm experiencing some troubles with
t38modem's configuration, and I would like to know if you had have
experience with
To make it clear, the change was merged to the 1.6.2 branch recently, and will
not be in 1.6.2.7 as those releases candidates were made a couple of weeks ago.
The changes will be available in the next set of release candidates, slated to
be 1.6.2.8-rc1 sometime this week.
Leif.
Miguel Amez
Hi there.
I have the similar problem (Digium fax - sending fax call file vs
manager originate) sending faxes with Asterisk 1.6.2.6 and Digium
res_fax. Receiving is OK.
I use Local channel in Call file and context [fax-out] in dialplan.
My setup: Asterix-SIP (T.38)- Cisco(MERA MSIP v.1.0.2)-
On 05/03/2010 11:59 AM, Ilmars Knipshis wrote:
Problem in short is as following:
after reINVITE from Cisco to negotiate T.38:
--- SIP read from UDP:193.110.9.17:5060 ---
INVITE sip:37166101...@159.148.78.220 SIP/2.0
Via: SIP/2.0/UDP 193.110.9.17:5060
From: