Make sure you have the bios updated to recognise the card. If the hardware
does not see it the OS wont either.
I just built Asterisk on an old single 450 PII Compaq Prolient 800 with an
x100p and 3 ata186's. It works just fine.
Hope this helps.
--john
- Original Message -
From: Rodolfo
It might help if you tried to modprobe the right module. Try wcfxo instead.
wcfxo is for the x10xp cards
wcfxs is for the TDM cards irregardless of the modules installed.
And the use of the -v parameter on all these commands would be helpfull.
Lyle
- Original Message -
From: Rodolfo
Hi and thanks.
Is there any especial issue about x100p? I'm building the system in an
old 400 Celeron but it detects and recognize all the PCI cards
installed: modem, nic, and video. Is there any reason for not to
recognize the x100p?
RODOLFO
John Hill wrote:
Make sure you have the bios
The mainboard is not recognizing the x100p card. It is not showing the
card on the PCI devices listing after POST
Any ideas, please?
RODOLFO
Rodolfo Grave wrote:
Hi and thanks.
Is there any especial issue about x100p? I'm building the system in an
old 400 Celeron but it detects and
Mailing List - Non-Commercial Discussion
[EMAIL PROTECTED]
Sent: Sunday, September 12, 2004 9:47 AM
Subject: Re: [Asterisk-Users] Problems installing x100p -- Main board is
notrecognizing the card
The mainboard is not recognizing the x100p card. It is not showing the
card on the PCI devices listing
Rodolfo Grave a écrit :
The mainboard is not recognizing the x100p card. It is not showing the
card on the PCI devices listing after POST
Any ideas, please?
Remove all unnecessary PCI card and try (eg only VGA X100P), to see if
you computer detect card:
1. if not, try this card in another
On Fri, 2004-06-18 at 14:57, Adam Lewis wrote:
All,
I'm having trouble getting the X100P working.
Lsmod shows :
zaptel179808 0
I did a .
# modprobe zaptel
and here is my zaptel.conf (comments omitted)
__SNIP__
fxsks=1
loadzone = us
defaultzone=us
Don't you need a 'modprobe wcfxs' also?
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Adam Lewis
Sent: 18 June 2004 14:57
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Problems with X100P
All,
I'm having trouble getting the X100P working.
That did it. Thanks!
Adam
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason Williams
Sent: Friday, June 18, 2004 10:08 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Problems with X100P
At 09:57 18/06/2004 -0400, you wrote:
I did
David J Carter [EMAIL PROTECTED] wrote:
Don't you need a 'modprobe wcfxs' also?
Not for an FXO device, such as the X100P, no.
--
_/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/
_/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h
_/ _/_/ _/ _/ _/_/
10 matches
Mail list logo