Hi Chris, I've had A LOT of experience with the cheap X100Ps in the last few weeks. I myself bought two of them off ebay. $6.95 special! I also had problems with them and within the past 12 hours have replaced them with a TDM22B that so far(1 phone call) has worked great. I would suggest turning verbosity on and watching the asterisk console when the call comes in. If it is not showing that there is a ring on your Zap device, then it's not a problem with your dial plan. I would say that it's likely that the modem would be defective if sometimes it detected a ring and other times not. If asterisk is always showing that there is a ring, then I would take another good look at the context in your extensions.conf that matches the one set for your zap device in Zapata.conf.
While trying to sort out my X100P clone problem's on here, a user rudely told me to buy a real card. Ended up being good advice, just not tactful. I could have saved WEEKS of headaches had I not tried to save some $$. I guess I learned the hard way that you get what you pay for. I'm not telling you to buy another card, I'm just sharing my experience with X100P. Hope this helps, Paul -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christoph Rothe Sent: Thursday, April 28, 2005 01:24 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] X100P Clone any hints for recognizing RINGing ? On Mon, 25 Apr 2005, Andrew Kohlsmith wrote: > It has absolutely nothing to do with what "economically suits them best" -- it > has everything to do with the fact that when you buy a clone X100P you DO NOT > KNOW what you're getting. The chipset may be the same but as you can clearly > see from searching this very list, the hybrid circuitry (a crucial crucial > part of the design) can be VERY different, and even if the hybrid's fine, > there are subtle variations in the chipset that can bite you in the ass. Hi everyone, I made the same mistake and bought a cheap clone. I do understand that these cheap X100P cards do not work well enogh for production use. But as I already bought this card, can anyone give me some advice regarding the following: Dialing out from Asterisk works like a charm, but recognizing a RING is much more different. It works in 1 of 10 cases that Asterisk recognizes the ringing on the phone :-) Where could I change which parameters to make Asterisk a little more "sensible" ? Please help and do not tell me to buy another card - I do understand what I bought, but now I already have it and want to use it. Thanks a lot! Christoph _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users