> I am configuring two cards in Trixbox. 1 TE110P T-1 card and one TDM2400P > with 16 fxs ports (All 24 show up in zaptel.conf so the PRI channels start > at 25). Can I use a channel range to separate the config for each card, as > shown below, or do I have to enter configs for each channel? > > Also in zaptel.conf I see that the TDM card is span 1 board zero, And the > T-1 card is Span 2 board 0. So for the T-1 card I entered > span=2,1,0,esf,b8zs" > > Is this correct? What are the trailing 1,0 for after the span ID? >
Check out: http://www.voip-info.org/wiki/index.php?page=Zaptel.conf+span+syntax > OT-In reference to posting messages-what is "top posting"? > Top posting means putting your reply at the very top of your post and leaving the thread contents below. You'll notice that I left your original post mostly in tact, cutting out only the boring email header info. It is proper etiquette not to "top post" but instead put your replies at the very end of the post so that those reading it can see it in chronological order. If everyone "top posted" then the quoted thread would be in reverse chronological order and you'd need to scroll to the bottom to see the start of the discussion and then scroll up as you read. Most of us prefer to scroll down as we read! :) > ---------------------------------- > ; Zapata telephony interface > > [trunkgroups] > ; > [channels] > ; > context=incoming > switchtype=national > ; > signalling=fxs_ks > usecallerid=yes > cidsignalling=bell > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > musiconhold=default > channel=1-16 > > ; > context=incoming > switchtype=national > ; > signalling=pri_cpe > usecallerid=yes > cidsignalling=bell > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > musiconhold=default > channel=25-47 > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users