I have a cordless phone that causes this same thing to happen every time I plug it
into a digium fxs port. I have an old style tdm card and a new one, same results with
both. Don't know what it is about the phone that makes this happen; It works fine
plugged into a pots line. The phone is a
Same here. I, too have received replacement cards from Digium, and I have
even tried replacing the proSLICs, all to no avail.
Also to note: the same port on each (of three) cards always goes out first.
On Thursday, 12 February, 2004 19:22, John Vozza wrote:
Same here...
Usually after
Same here...
Usually after several of these show up in my system log:
Power alarm on module 1, resetting!
Need to unload/reload module wcfxs in order to get the dial tone back.
Happens several times a week, sometimes more frequently.
John
I have had similar issues with mine TDM400 w/4
modules. I get both no dial tone and sometime a large level of static on the
port and although sometimes manually unloading and reloading the drivers will
correct the problem most of the time I have to reboot the system. Also, do you
get
I am have the exact same issue.
I have/had a problem where the TDM400P turns to static and stops
responding to Asterisk. I also notice the "Ouch, part reset. Quickly
restoring reality." error messages in the log and CLI console.
I originally thought it was an IRQ sharing issue and/or
