Personally I use spandsp + res_fax (res_fax.so, res_fax_spandsp.so) and
SendFAX/ReceiveFAX applications.
2014-03-24 8:41 GMT+03:00 Mike Diehl mdiehlena...@gmail.com:
Hi all,
I'm installing Hylafax on my Asterisk system. From what I've read, I can
either use IAXModem or T38Modem to provide
On Mon, 24 Mar 2014 01:41:47 -0400
Mike Diehl mdiehlena...@gmail.com wrote:
Hi all,
I'm installing Hylafax on my Asterisk system. From what I've read, I
can either use IAXModem or T38Modem to provide the virtual fax
device. So at the risk of starting a religious war, which one should
I
Hi people
Just having a quick check to see if anyone is using any AMI proxies and
which are the most popular. For our purposes it must be able to connect to
multiple asterisk instances.
Thanks for the help.
Ish
--
Ishfaq Malik
Department: VOIP Support
Company: Packnet Limited
t: +44 (0)845
Hi Mike,
Am Montag, den 24.03.2014, 01:41 -0400 schrieb Mike Diehl:
Hi all,
I'm installing Hylafax on my Asterisk system. From what I've read, I
can either use IAXModem or T38Modem to provide the virtual fax device.
So at the risk of starting a religious war, which one should I use?
I don't
In article alpine.DEB.2.10.1403211727570.13768@ws,
Steve Edwards asterisk@sedwards.com wrote:
On Fri, 21 Mar 2014, Steve Edwards wrote:
Googling 'dahdi pseudo channel limit modprobe' showed the secret sauce.
Oops. Guess I should complete the thread...
You can set the DAHDI pseudo
I made myself look a little silly recently in a talk regarding
asteriskdocs.org. I didn’t realize the 4th ed. of the Definitive Guide was
apparently actually out (http://shop.oreilly.com/product/0636920025894.do),
because I went by asteriskdocs.org’s claim that it was being worked on in OFPS
The core show channels verbose command shows a calls processed
value. Mine is currently 1928273.
Exactly what does this figure represent? How is a call defined in
this context?
--
Mitch
--
_
-- Bandwidth and Colocation
Hi,
Few months back I configured Asterisk 11.6.0 for an outbound fax using T.38
protocol as listing down the flow below;
Asterisk Fax server - (IP) - Cisco VGW -(IP) - Carrier
The issue I'm currently getting when Asterisk receives warnings as listed
below, it is overloading the Cisco VGW,
On Mon, Mar 24, 2014 at 8:54 AM, Matt Behrens m...@zigg.com wrote:
I made myself look a little silly recently in a talk regarding
asteriskdocs.org. I didn't realize the 4th ed. of the Definitive Guide was
apparently actually out (http://shop.oreilly.com/product/0636920025894.do),
because I
On Mon, Mar 24, 2014 at 6:17 AM, Ishfaq Malik i...@pack-net.co.uk wrote:
Hi people
Just having a quick check to see if anyone is using any AMI proxies and
which are the most popular. For our purposes it must be able to connect to
multiple asterisk instances.
All depends on the language you
On Mon, Mar 24, 2014 at 6:17 AM, Ishfaq Malik i...@pack-net.co.uk
wrote:
Just having a quick check to see if anyone is using any AMI proxies and
On Mon, 24 Mar 2014, Paul Belanger wrote:
All depends on the language you want to use. We used starpy for a while,
but ended up rewriting our own
On Mon, March 24, 2014 01:41, Mike Diehl wrote:
Hi all,
I'm installing Hylafax on my Asterisk system. From what I've read, I can
either use IAXModem or T38Modem to provide the virtual fax device. So at
the risk of starting a religious war, which one should I use?
I don't mind running IAX
Hi,
A silly question bouncing in my head for a long time :
when I'm installing-configuring a new Asterisk system, I'm using a script
that issue the usual ./configure, make and make install commands to install
Asterisk from source.
When installation fails for any reason, I would re-run my
Hi,
I followed the TLS/SRTP tutorial on the wiki [0] using Asterisk 11.8.1
on CentOS 6.5 x86_64 and CSipSimple on a Nexus with Android 4.4.x local
wifi. The phone seems to register but directly after that things fall
apart (turning SELinux off made no difference):
*CLI -- Registered SIP
A silly question bouncing in my head for a long time :
when I'm installing-configuring a new Asterisk system, I'm using a script that issue the usual
./configure, make and make install commands to install Asterisk from source.
When installation fails for any reason, I would re-run my
Thomas Rechberger wrote:
meanwhile i got an answer from fprior who was testing patch already.
add this code to chan_sip.c :
/* Allow domain to be overridden */
if (!ast_strlen_zero(p-fromdomain))
d = p-fromdomain;
else /* Save for any further attempts */
ast_string_field_set(p, fromdomain, d);
Hi,
I'm installing Hylafax on my Asterisk system. From what I've read, I
can either use IAXModem or T38Modem to provide the virtual fax device.
we are using T38modem, it was a long way to get it stable, but finally
it works quite good with 10 parallel running T38modems.
But your carrier has
On Mon, Mar 24, 2014 at 8:45 AM, Mitch Claborn mitch...@claborn.net wrote:
The core show channels verbose command shows a calls processed value.
Mine is currently 1928273.
Exactly what does this figure represent? How is a call defined in this
context?
The simple answer is, that count is not
I have used every asterisk 11.8.X version.
Have not had an issue till 11.8.0 and 11.8.1
When I use ConfBridge I am attempting to put all
participants in MUTE mode and just one talker...
However, since 11.8.0 I am hearing feedback in the
announcement like the channel is not really muted.
I dropped
On 24-03-14 21:28, Patrick Laimbock wrote:
[snip]
== Problem setting up ssl connection: error:14094410:SSL
routines:SSL3_READ_BYTES:sslv3 alert handshake failure
[Mar 24 21:20:56] WARNING[28467]: tcptls.c:272 handle_tcptls_connection:
So others may find the fix: make sure the server and
20 matches
Mail list logo
