[Asterisk-Users] Faint background noise/crackle on FXS port on TDM400P

Hi, I have had this issues for ages but have ignored it, but my handsets get faint background crackle on the FXS port. When I connect the handset directly into my PSTN, it goes away complete, so I am generating this from somewhere in my asterisk box. I get it immediately when the phone goes

Re: [Asterisk-Users] Faint background noise/crackle on FXS port on TDM400P

Hi, more info, it seems that I am only getting the background noise on one of the two FXS ports on my TDM400P One port is perfect, the other is crackly. I ran a bunch of tests, checked interrupts etc. Anyone seen this issue before ? Both ports are configured identically. Mark

[Asterisk-Users] Delaying media stream by short period after 183 is sent

Hi, anyone know of a way that I can delay the RTP stream a little bit once the 183 is sent, I just want to delay it by around 100ms or so for some troubleshooting. Also, I always see a RTP packet before the 183 is sent for each call, it is just a single packet, is something wrong here as my

[Asterisk-Users] Presence + Eyebeam + Asterisk 1.2

Hi, anyone managed to get a Presence Agent configuration with Asterisk 1.2 and X-Ten Eyebeam working. I believe this should be paritally supported now in 1.2 ? regards Mark___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users

Re: [Asterisk-Users] Re: Presence + Eyebeam + Asterisk 1.2

asterisk does not support presence --- Mark van Kerkwyk [EMAIL PROTECTED] a écrit : Hi, anyone managed to get a Presence Agent configuration with Asterisk 1.2 and X-Ten Eyebeam working. I believe this should be paritally supported now in 1.2 ? regards Mark

[Asterisk-Users] Possible to configure default bridge between zaptel interfaces when Asterisk is shut down ?

Hi, anyone know of a default driver option that could be set so that an incoming pstn call on my fxo interface would be forwarded/bridged to 1 or more fxs interfaces and vice versa. Would be nice to have a fail-open option, whereby a phone connected to the fxs interface could still

[Asterisk-Users] Fax hangup causes incoming ring to be generated

Hi, I have an annoying issue whereby when my fax machine hangs up (after receiving a fax or any call) when on a FXS interface (I have a TDM400P), the default incoming ring kicks in. I guess the voltage drop when the fax hangs up is causing asterisk to think there is an incoming call. Any ideas

[Asterisk-Users] Problems getting FXO channel working - Unable to create channel of type 'Zap' (cause 0)

Hi, I have searched around as much as I can and can't find any good info to help me try this problem. I have added a FXO card to my server and from everything I can see, I have configured it right. *Obviously not* Below is my config, any ideas on troubleshooting this ? regards Mark *CLI