Hi Steven, I wish, I already have 2 spare TE410p and 1 TE405p. But customer wants to use Analogue and they already installed the lines. Yesterday, I ready about the FXO modules being replaced by Digium, this relaxed me a bit. But as you said, I will have to worry about the ring and hangup detection, cleaner lines, impedance matching echo problems specially that I have not heard of anyone using TDM with FXO in Jordan.
Regards, Hadi Jadallah. >Date: Mon, 03 Jan 2005 12:47:13 -0600 >From: Steven Critchfield <[EMAIL PROTECTED]> >Subject: Re: [Asterisk-Users] 8 pstn lines+ on Asterisk supported > hardware. >To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain > >On Mon, Mon, 03 Jan 2005 12:47:13 -0600, Steven Critchfield wrote: > > >Size up your need and consider a T1 or E1 interface. You are really >close to some markets break even point. Also expanding beyond 8 lines >should probably be done only on a digital line. Add to it the ability to >have faster ring and hangup detection, cleaner lines, and no concern >about impedance matching echo problems. > >Then you can look at the future growth potential. With a T1/E1 interface >already in place, it shouldn't be any real effort or even delay if you >want to add more circuits. From the switch side they just turn up a few >more DS0's and you coordinate to configure your side as well. No real >circuits have to be wired and no new equipment to add. Not to mention a >single TE100P card at $500 is cheaper than 2 TDM400 cards fully kitted >out. >-- -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.290 / Virus Database: 265.6.7 - Release Date: 12/30/2004 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
