On Thu, Feb 19, 2015 at 6:58 PM, pramod Jayram pramod@gmail.com wrote:
Hello everyone,
Even i have the same problem. I have created two wireless network one in
ap mode and other in adhoc mode with two different ip address which assigns
ip to clients using dhcp. But a client (not running
I have used traceroute and ip route but there is no route to other routers
and i have also configured the same in conf file.
thank you
On Fri, Feb 20, 2015 at 8:34 AM, Dave Taht dave.t...@gmail.com wrote:
On Thu, Feb 19, 2015 at 6:58 PM, pramod Jayram pramod@gmail.com
wrote:
Hello
I am in no way an expert with babeld, but I will try to answer your question.
Everything you say is correct.
-- Juliusz
___
Babel-users mailing list
Babel-users@lists.alioth.debian.org
Consider I have three routers R1,R2,R3. Each of them are configured with an ad
hoc network and an access point respectively. The ssid of the of the ad hoc
network of all the routers be mesh and that of the access points be C0,C1,C2.
The router is running on babel protocol on wireless
Hello guys,I'm i newbie here..my question is as follows,
The babel protocol works fine with 2 hop or 3 hop,so what i wanted to know
is..Consider A B C as the nodes, client of A must communicate to client of
C over two hops using this protocol,if so is there is any configuration
that i should know
5 matches
Mail list logo