: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
The make a variety of guides the easiest being a 1 x 2 or 1 x 4 clamped down
with two c clamps and use the left hand to make sure the circular saws left
table edge runs tight against the guide board. Working slow and carefully
you can
William Stephan
-Original Message-
From: Dale Leavens[EMAIL PROTECTED]
Sent: 8/24/06 8:25:58 PM
To: blindhandyman@yahoogroups.comblindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
Bill,
Two simple guides essentially the same only one
Any of you folks have experience with handheld circular saws? Aside from the
obvious danger factor, is it possible to build a guide so straight cuts can be
made with one?
Bill Stephan
Kansas City, MO
(816)803-2469
William Stephan
-Original Message-
From: John Schwery[EMAIL
[mailto:[EMAIL PROTECTED]
On Behalf Of William Stephan
Sent: Thursday, August 24, 2006 12:21 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
Any of you folks have experience with handheld circular saws? Aside from the
obvious danger
Bill,
Several types of guides have been bilt just a board tacked alongside where the
saw will travel is the simplist.
I did one that runs along a piece of aluminum angle you screw dwon
to the waiste side of the material, and it fitted into
the fence slots of a skill saw.
If you want to see the
: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
Bill,
Several types of guides have been bilt just a board tacked alongside where the
saw will travel is the simplist.
I did one that runs along a piece of aluminum angle you screw dwon
to the waiste side of the material, and it fitted
PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Thursday, August 24, 2006 12:20 PM
Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
Any of you folks have experience with handheld circular saws? Aside from
the obvious danger factor, is it possible to build a guide so straight
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
The make a variety of guides the easiest being a 1 x 2 or 1 x 4 clamped down
with two c clamps and use the left hand to make sure the circular saws left
table edge runs tight against the guide
Tom,
Are you using a direct drive or a worm drive circular saw. The direct drive
saw has a wider foot print and seems like it would be harder to get an
accurate cut with.
At 11:17 AM 8/24/2006 -0700, Tom Fowle wrote:
Bill,
Several types of guides have been bilt just a board tacked alongside
polar bear habitat.
- Original Message -
From: William Stephan [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Thursday, August 24, 2006 1:20 PM
Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws?
Any of you folks have experience with handheld circular saws
10 matches
Mail list logo