Okuji,
I tried the fix and I'm afraid it did not solve the problem, it does make a
difference however - let me explain.
On my first attempt to test the fix I saw no difference at all, the debug
statement gave the same output, i.e.:
reading the offset 0x80 in the drive 0x1a0b9a4
and Error 18
At Sat, 25 May 2002 09:46:03 +0100,
Graham Smith wrote:
I tried the fix and I'm afraid it did not solve the problem, it does make a
difference however - let me explain.
Thanks for your information. I was a bit mistaken the logic. So I've
checked in another fix right now. Could you try it? I
Okuji,
Success!!
This does indeed fix the problem, congratulations and very many thanks.
Regards
Graham
On Saturday 25 May 2002 12:38 pm, Yoshinori K. Okuji wrote:
At Sat, 25 May 2002 09:46:03 +0100,
Graham Smith wrote:
I tried the fix and I'm afraid it did not solve the problem, it does
At Thu, 23 May 2002 20:37:22 +0900,
Yoshinori K. Okuji [EMAIL PROTECTED] wrote:
Thanks for your investigation. That information is enough to debug
GRUB. I didn't have time unfortunately, but I'll do that ASAP. Wait
for a while, please.
I've checked in a fix into the CVS. Could you try it?
Okuji,
Further to my earlier message, now that I've had time to think about it.
Assuming that the drive number and offset in the message are swapped it
would appear that when chainloading Win98 from GRUB installed on the hard
disk it is attempting to read sector 0x1a0b9a4 from (hd0).
At Thu, 23 May 2002 08:07:44 +0100,
Graham Smith wrote:
Assuming that the drive number and offset in the message are swapped it
would appear that when chainloading Win98 from GRUB installed on the hard
disk it is attempting to read sector 0x1a0b9a4 from (hd0). Interestingly
this is the
Hello Graham,
At Mon, 20 May 2002 23:33:45 +0100,
Graham Smith wrote:
Could you advise how I can assist in debugging this?
Sure. First, please get the current version from the CVS. Then compile
it and test it both with a floppy and with a hard disk. When testing
it, turn on the debug mode by
. Okuji [SMTP:[EMAIL PROTECTED]]
Sent: 22 May 2002 08:05
To: Graham Smith
Cc: [EMAIL PROTECTED]
Subject:Re: GRUB fails to boot Win98
Hello Graham,
At Mon, 20 May 2002 23:33:45 +0100,
Graham Smith wrote:
Could you advise how I can assist in debugging this?
Sure. First, please get
Could you test the official version 0.92? If this also fails, we'd
need your assistance to debug GRUB.
Thanks,
Okuji
___
Bug-grub mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/bug-grub
Okuji,
I have now tried all of the following:
GRUB 0.91 (standard release without any RedHat patches)
GRUB 0.91 (with RedHat patches as per RedHat 7.3)
GRUB 0.92 (standard release)
I have tried using all these versions from boot floppy and from hard disk both
with stage1 installed in MBR of
Dear GRUB gurus,
I have having problems booting my system using GRUB. It is a dual boot system
running RedHat Linux 7.3 (though I was having the same problem with 7.2) and
Microsoft Windows 98SE. The system will boot quite happily if I use a GRUB
boot floppy or if I use LILO from the hard
11 matches
Mail list logo