, Nishanth Shivashankaran wrote:
IP-Config: Got DHCP answer from 192.168.70.1, my address is 192.168.70.9
IP-Config: Complete:
device=eth0, addr=192.168.70.9, mask=255.255.255.0,
gw=255.255.255.255,
host=192.168.70.9, domain=, nis-domain=(none),
bootserver=192.168.70.1
wrote:
Hi, Nishanth,
On May 10, 2015, at 11:41 AM, Nishanth Shivashankaran wrote:
IP-Config: Got DHCP answer from 192.168.70.1, my address is
192.168.70.9
IP-Config: Complete:
device=eth0, addr=192.168.70.9, mask=255.255.255.0,
gw=255.255.255.255,
host=192.168.70.9
, at 11:41 AM, Nishanth Shivashankaran wrote:
IP-Config: Got DHCP answer from 192.168.70.1, my address is
192.168.70.9
IP-Config: Complete:
device=eth0, addr=192.168.70.9, mask=255.255.255.0,
gw=255.255.255.255,
host=192.168.70.9, domain=, nis-domain=(none
- not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
Rebooting in 180 seconds..
On Tue, May 5, 2015 at 7:49 AM, Nishanth Shivashankaran
wrote:
HI Marc,
Thank you for the reply, I am not seeing anything on the serial
terminal. I have ordered a macraigor wiggler, I
fs on
unknown-block(2,0)
Rebooting in 180 seconds..
On Tue, May 5, 2015 at 7:49 AM, Nishanth Shivashankaran
nshiv...@asu.edu
wrote:
HI Marc,
Thank you for the reply, I am not seeing anything on the serial
terminal. I have ordered a macraigor wiggler, I will try using
in 180 seconds..
On Tue, May 5, 2015 at 7:49 AM, Nishanth Shivashankaran
nshiv...@asu.edu
wrote:
HI Marc,
Thank you for the reply, I am not seeing anything on the serial
terminal. I have ordered a macraigor wiggler, I will try using that
and
see
if the roach
(driver?)
1f04256 mtdblock4 (driver?)
1f05384 mtdblock5 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
Rebooting in 180 seconds..
On Tue, May 5, 2015 at 7:49 AM, Nishanth Shivashankaran nshiv...@asu.edu
wrote:
HI Marc,
Thank you
, 2015 at 10:49 PM, Nishanth Shivashankaran
nshiv...@asu.edu wrote:
Hi All,
We bought a new desktop and I tried installing nfs boot on to the new
computer to boot the roach1 and was trying to bring the roach1 up. But I
think I messed up installing something somewhere and the roach 1
characters to
the
minicom terminal I was getting error messages like kernel panic etc. now
even that is not showing up.
Can someone help me in this regard.
Warm regards,
Nishanth Shivashankaran
Arizona State University
Email:nshiv...@asu.edu
--
Nishanth Shivashankaran
it stopped returning characters to the
minicom terminal I was getting error messages like kernel panic etc. now
even that is not showing up.
Can someone help me in this regard.
Warm regards,
Nishanth Shivashankaran
Arizona State University
Email:nshiv...@asu.edu
and Technology
Quantum Sensors Project​
--
Nishanth Shivashankaran
Arizona State University
Phone:-480-246-6866
Email:nshiv...@asu.edu
--
Nishanth Shivashankaran
Arizona State University
Phone:-480-246-6866
Email:nshiv...@asu.edu
National Institute of Standards and Technology
Quantum Sensors Project​
--
Nishanth Shivashankaran
Arizona State University
Phone:-480-246-6866
Email:nshiv...@asu.edu
adc_dac_pcores.7z
Description: application/7z-compressed
-6_MMCM_Limitations
HTH,
Dave
On Mar 6, 2015, at 10:20 AM, Nishanth Shivashankaran wrote:
Hi All,
I have replaced the DCM with the MMCM, and the firmware works till
about 480MHz. I tried to play with other multipliers and dividers values, I
get it to compile for higher frequencies
. The current calculated FVCO is 512.032770
MHz.
Reference the V6 architecture Users Guide or search the Xilinx Answer
Records
database for the error code.
Errors found during logical drc.
thanks
Nishanth Shivashankaran
anymore (for whatever reason; someone
right-clicked and chose break link?).
Jason
On 25 Jan 2014, at 3:40, Nishanth Shivashankaran nshiv...@asu.edu wrote:
Hi All
I am trying to interface a MKID dac with the roach to generate tones
by using a bram as look up table for DAC but when I try
Hi All
I am trying to interface a MKID dac with the roach to generate tones by
using a bram as look up table for DAC but when I try to compile the design
i get an error as below
Error in
'trydac/dac_mkid_4x/Subsystem/parallel_to_serial_convertermatlab:open_and_hilite_system
Hi All,
I wanted to connect a 1GHZ clock to the SMA connector on the Roach. I
did not find any documentation about maximum clocking speed. Please can
someone share some knowledge about SMA clocking.
Thanks and regards
Nishanth Shivashankaran
Arizona State University
.
Is there any way that I can correct this?
I am very sure that I installed the same versions of matlab and xilinx as
mentioned in the casper website.Somebody please help me in this regard.
Thank you,
Nishanth Shivashankaran
18 matches
Mail list logo