Re: [casper] Connecting Error using Python library with KATCP server (ROACH-2)

I think uploading a new kernel file again may solve your problem. I used minicom-send files-ymode to upload kernel files successfully. At the first time I failed to update kernel file and the problem was like yours, then I tried again using the same command of minicom, and it worked. Sincerely,

Re: [casper] Connecting Error using Python library with KATCP server (ROACH-2)

Dear Casperites, Unfortunately my problem was not resolved so quickly. Upon running the 'run new root command', I received the following issue when attempting a y-modem connection via minicom: ## Ready for binary (ymodem) download to 0x0400 at 115200 bps... CC Timed out xyzModem -

Re: [casper] Connecting Error using Python library with KATCP server (ROACH-2)

I think Jason is right, ROACH-2 file system and kernel on my board were old and didn't match the version of casperfpga. I updated the kernel, and now I can program my FPGA using corr package. I'll migrate to casperfpga if needed, but now corr is enough. Just as Jason said, do NOT overwrite uboot.

Re: [casper] Connecting Error using Python library with KATCP server (ROACH-2)

I suspect a mismatch between your casperfpga version and ROACH2 filesystem. Like progremote is not supported? We are running different versions so I can't be sure which version you should be running, but it looks like these are the latest public releases: romfs (root filesystem for Linux,

Re: [casper] Connecting Error using Python library with KATCP server (ROACH-2)

Dear Casperites, I'm facing the same error that Shanquan was facing when following the "Introduction to Simulink " (first tutorial) for the Roach2. Please see below: RuntimeError

[casper] Connecting Error using Python library with KATCP server (ROACH-2)

Dear CASPER experts, I'm sorry for this spam. I'm an exchange undergraduate student working in Yale university now. I had a problem while using Python to connect my PC to the ROACH2 board. I've gotten .fpg files already using Simulink and Xilinx ISE. Now my purpose is to load the file to the