Re: [Catalyst] Change of server

Don't use mod_perl! Look at https://metacpan.org/pod/distribution/Catalyst-Manual/lib/Catalyst/Manual/Deployment/Apache/FastCGI.pod Best regards, Alex On 2017-03-03 06:02, "Andrés Chandía" wrote: Hi there, I had a Catalyst application working on a debian 7 perl 5.14 apache 2.4, but I had to

Re: [Catalyst] Change of server

root@iac:/home/andres# a2dissite local.iac.conf (the configuration with Catalyst) Site local.iac disabled. To activate the new configuration, you need to run:   service apache2 reload root@iac:/home/andres# /etc/init.d/apache2 restart [ ok ] Restarting apache2 (via systemctl): apache2.service.

Re: [Catalyst] Change of server

Did the basic Apache config with the 'Hello world' work? That is, without all the perl configs? 2017-03-03 12:38 GMT-03:00 "Andrés Chandía" : > Unfortunately not, > root@iac:/home/andres# netstat -lnp > Active Internet > connections (only servers) > Proto Recv-Q Send-Q

Re: [Catalyst] Change of server

Unfortunately not, root@iac:/home/andres# netstat -lnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1148/mysqld tcp

Re: [Catalyst] Change of server

I assume the command keeps running in that state and while it is doing so , can you check if apache2 listening on configured port (80) and if it is so does , is it serving the app in expected manner ? regds mallah. ___ List:

Re: [Catalyst] Change of server

I modified a little bit your command, I put the semicolon at the end and now there is no error message: root@iac:/home/andres# ( . /etc/apache2/envvars && apache2 -f /etc/apache2/apache2.conf -e Debug -X ; ) [Fri Mar 03 15:02:48.333291 2017] [so:debug] [pid 16801] mod_so.c(266):

Re: [Catalyst] Change of server

any idea why the error below ? -e: command not found ___ List: Catalyst@lists.scsys.co.uk Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst Searchable archive: http://www.mail-archive.com/catalyst@lists.scsys.co.uk/ Dev

Re: [Catalyst] Change of server

Already done, it made no difference thanks Its not typo , the reason is that the env variable ${APACHE_LOCK_DIR} is not set , . /etc/apache2/envvars takes care of that part. ___             andrés chandía NMT | Dungupeyem | Corlexim administrador

Re: [Catalyst] Change of server

Dear Andres , in my systemd based system it is possible to start apache2 from root prompt like below: # ( . /etc/apache2/envvars && apache2 -f /etc/apache2/apache2.conf -e Debug -X ) and it does spits out the messages to terminal. After stopping the apache2 using systemctl try to start

Re: [Catalyst] Change of server

che2 binary from cmdline by specifying the >> path >> of main configuration file. >> >> Check apache2 -h >> >> Also check netstat -lnp output if there is something bound to the same >> port (possibly 80 ) >> >> >> >> Sent from my Samsu

Re: [Catalyst] Change of server

Dear Andres , in my systemd based system it is possible to start apache2 from root prompt like below: # ( . /etc/apache2/envvars && apache2 -f /etc/apache2/apache2.conf -e Debug -X ) and it does spits out the messages to terminal. After stopping the apache2 using systemctl try to

Re: [Catalyst] Change of server

web framework Subject: Re: [Catalyst] Change of server Thanks for your concern, I have tried that also: systemctl status apache2 apache2.service - LSB: Apache2 web server Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled) Drop-In: /lib/systemd/system/apache2.service.d

Re: [Catalyst] Change of server

g Galaxy smartphone. > > Original message > From: Andrés Chandía > Date: 3/3/17 12:05 (GMT+05:30) > To: The elegant MVC web framework > Subject: Re: [Catalyst] Change of server > > Thanks for your concern, I have tried that also: > > systemctl s

Re: [Catalyst] Change of server

. Original message From: Andrés Chandía Date: 3/3/17 12:05 (GMT+05:30) To: The elegant MVC web framework Subject: Re: [Catalyst] Change of server Thanks for your concern, I have tried that also: systemctl status apache2 apache2.service - LSB: Apache2 web server Loaded

Re: [Catalyst] Change of server

: Andrés Chandía <and...@chandia.net> Date: 3/3/17 12:05 (GMT+05:30) To: The elegant MVC web framework <catalyst@lists.scsys.co.uk> Subject: Re: [Catalyst] Change of server Thanks for your concern, I have tried that also: systemctl status apache2  apache2.service - LSB: Apache

Re: [Catalyst] Change of server

Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name tcp        0      0 127.0.0.1:3306          0.0.0.0:*               LISTEN      1134/mysqld 

Re: [Catalyst] Change of server

On Fri, Mar 3, 2017 at 7:35 AM, "Andrés Chandía" wrote: > Thanks for your concern, I have tried that also: > > systemctl status apache2 > > apache2.service - LSB: Apache2 web server >Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled) > Drop-In:

Re: [Catalyst] Change of server

To find the error messages or tail the error Logs. Regds Mallah Sent from my Samsung Galaxy smartphone. Original message From: Andrés Chandía Date: 3/3/17 10:32 (GMT+05:30) To: catalyst@lists.scsys.co.uk Subject: [Catalyst] Change of server Hi

Re: [Catalyst] Change of server

talyst@lists.scsys.co.uk Subject: [Catalyst] Change of server  Hi there, I had a Catalyst application working on a debian 7 perl 5.14 apache 2.4, but I had to change it to a new server working with ubuntu 16.04 perl 5.22 apache 2.4.18. I did all the installation in the same way I did it for t

[Catalyst] Change of server

 Hi there, I had a Catalyst application working on a debian 7 perl 5.14 apache 2.4, but I had to change it to a new server working with ubuntu 16.04 perl 5.22 apache 2.4.18. I did all the installation in the same way I did it for the old debian but the apache server is not starting, and at