Re: [Cdrecord-support] Cdrtools-2.01.01a04 ready

Joerg Schilling wrote on 01/13/06 04:24: Joachim Feise [EMAIL PROTECTED] wrote: Does that mean that you have started the new development cycle for cdrtools? I have an mkisofs patch that I would like to see included in mkisofs: http://www.feise.com/~jfeise/Downloads/mkisofs/ Besides

Re: [Cdrecord-support] Re: cdrecord doesn't appear to support high speed media (4x-12x)

Steven Friedrich wrote on 06/05/05 19:54: I don't know what you mean. Did you try to go to this web site? Was it there? Gee, it isn't hard to put cdrecord into Google... Sites move, and then you get a 404. That's the nature of the Web... You don't even specify the version number. I run

Re: *nix flash utility for BTC DVD recorders

Thank you for this. I always booted from a DOS floppy to flash my BTC drive. While that wasn't too bad, the DOS sw only supports IDE, and I run my drive through an IDE-SCSI bridge on my SCSI controller... I'll try your program when I'm back from vacation... Cheers, -Joe -- To UNSUBSCRIBE,

Re: Re: cdrecord-prodvd don't work with BTC 1004

To put another data point in here, my BTC1004 (firmware V048) works fine with cdrecord-prodvd... So I would guess that your drive is broken. -Joe

Re: Problems with Linux 2.6.3 and growisofs

Just a followup to this issue: This was in fact a bug in the kernel. The fix from the scsi-kernel guys made it into 2.6.3-mm4 and 2.6.4-rc1. -Joe

Re: SCSI changes in 2.6.3 break dvd+rw-tools

That seems to be the same problem I reported earlier: growisofs hanging when running kernel 2.6.3. I just tried commenting out that particular line, and I can use growisofs just fine. -Joe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL

Re: Re: I/O Magic idvdrw4db

I'm trying to figure out where to locate the firmware info. I've checked /var/log/messages, dmesg output and /proc, but no luck. Suggestions? [...] Using libscg version 'schily-0.7' scsibus0: 0,0,0 0) 'ATAPI ' 'CD-RW 52XMax ' '161D' Removable CD-ROM 0,1,0 1) 'GENERIC ' 'DVD DUAL 4XMax '

Re: Re: I/O Magic idvdrw4db

I'm trying to figure out where to locate the firmware info. I've checked /var/log/messages, dmesg output and /proc, but no luck. Suggestions? [...] Using libscg version 'schily-0.7' scsibus0: 0,0,0 0) 'ATAPI ' 'CD-RW 52XMax ' '161D' Removable CD-ROM 0,1,0 1) 'GENERIC ' 'DVD DUAL 4XMax '

Re: growisofs blanking problem

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andy Polyakov wrote: 4693721088/4700372992 (99.9%) @2.0x, remaining 0:02 ^ With DVD+RW? Can you really confirm that your unit burns DVD+RW at 2x? Verify with dvd+rw-mediainfo... INQUIRY:[DVDRW

growisofs blanking problem

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, when using growisofs -Z /dev/srX=/dev/zero to blank a DVD+RW I get this error: growisofs -Z /dev/sr6=/dev/zero WARNING: /dev/sr6 already carries isofs! About to execute 'builtin_dd if=/dev/zero of=/dev/sr6 obs=32k seek=0' /dev/sr6: Current

Re: I/O Magic idvdrw4db

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 If it helps, I recently bought this model and I can confirm that cdrecord+prodvd works with this drive. - -Joe -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (MingW32) iD8DBQE/1MfiKc8oZ1MoTeoRAgLxAJ9LLKkEezDJkyOJ7qLA3tHC9933RwCfX3NR

Re: growisofs blanking problem

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andy Polyakov wrote: 4693721088/4700372992 (99.9%) @2.0x, remaining 0:02 ^ With DVD+RW? Can you really confirm that your unit burns DVD+RW at 2x? Verify with dvd+rw-mediainfo... INQUIRY:[DVDRW

Re: I/O Magic idvdrw4db

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Some update: it turns out that I/O Magic recently changed drive suppliers. - From their forum I gathered that they used to use an Optorite drive (firmware 2.xx). The drive that I just got a week ago from TigerDirect is a BTC drive, ID string DVDRW IDE