Saludos
Hace algunos días tuve una interrupción de energía electrica, recien había
añadido un nueva computadora (con nombre psrv) al Directorio LDAP, el
phpldapadmin se encontraba en modo consulta, cuando reinicie el servidor la
computadora que recien se había añadido (psrv) no aparecía en el
Hola:
Pudiera ser que la db se corrompio con la interrupcion electrica? A mi
me paso eso recien hace dos dias, lo que en mi caso, provoco que luego
no levantaba el openldap directamente. Al final resolvi pasandole un
slapd_db_recover a la db del openldap. Por ahi en tu caso, no llego a
tengo 2 discos y quiero tenerlos en espejo en centos 5 . Por ahi lei que se
puede hacer mediante software.
Alguien me puede indicar donde puedo investigar sobre este tema como
debo configurar la particion??? etc
___
CentOS-es mailing list
On Friday 06 July 2007, Michael Mueller wrote:
Thanks,
I did the vgscan after the hdb hdd was added to a fresh system; the hdb
disk was not identified as having a volume group
maybe i lost both disks - hda and hdb - doesn't seem likely; more likely
that i don't know enough about lvm to get
On Friday 06 July 2007, Garrick Staples wrote:
Why LD_LIBRARY_PATH is bad:
http://xahlee.org/UnixResource_dir/_/ldpath.html
Not argueing against you here, but ...is prepended to the existing list of
compiled-in loader paths for a given executable, and any system default...
from the link above
Rogelio Bastardo wrote:
I am looking for a Linux-based command line program that will run
implicit FTP encryption over port 990.
Any recommendations?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Can sftp
Akemi Yagi wrote:
On 7/5/07, Mark Hull-Richter [EMAIL PROTECTED] wrote:
On Wed, 2007-07-04 at 20:04 -0700, Akemi Yagi wrote:
When you got this warning:
WARNING: autofs_kill_sb [fs/autofs/autofs.ko] undefined!
did you copy the config file from the SOURCES directory? And did you
run
On 7/6/07, Robert - eLists [EMAIL PROTECTED] wrote:
I have seen people on the list say you can yum groupinstall everything yet
when I tried their method, it didn't work
This works in theory but not in practice, as not all packages belong to groups.
Is there actually a way other than making a
Hi,
Can you explain what have you tried till now? All I can say
man mdamd is sufficient.
--
Regards,
Sudev Barar
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
These are a few of the commands
thanks
On 7/5/07, joseph tacuyan [EMAIL PROTECTED] wrote:
On 7/6/07, kevin nation [EMAIL PROTECTED] wrote:
i work in tech support and i am an advanced windows user. but i have not
used linux other than booting up live cd's and checking out the
applications. i have recently installed
On Friday 06 July 2007 05:17, Garrick Staples wrote:
On Fri, Jul 06, 2007 at 05:09:46AM +0100, John Bowden alleged:
On Friday 06 July 2007 04:44, Garrick Staples wrote:
On Fri, Jul 06, 2007 at 04:30:58AM +0100, John Bowden alleged:
The sound card is an on board one.
class: AUDIO
On Thu, 28 Jun 2007, Radu-Cristian FOTESCU wrote:
What's amazing is that he got his problem resolved, I would never have
thought to post to this list to get something on the fedora wiki fixed.
It's kinda like posting to a MS Word list a problem about OpenOffice.
Well, thank you all, but
On Tue, 3 Jul 2007, Jerry Geis wrote:
What package has opengl in it ?
I am trying to compile wine-0.9.40 and I get errors
about not find undefined reference to gluNewTess.
The link line is including -lXext -lX11 -lGL
so its trying to do it but cant find it.
Is there a reason why you
I'm sorry, that mail was meant to go Radu-Cristian personally.
I have no intention to open this thread again.
-- dag wieers, [EMAIL PROTECTED], http://dag.wieers.com/ --
[all I want is a warm bed and a kind word and unlimited power]
___
CentOS
Date: Thu, 05 Jul 2007 16:48:55 +0200
From: Jordi Espasa Clofent [EMAIL PROTECTED]
Subject: Re: [CentOS] Postfix and mysql
centosplus contains postfix-mysql rpm, so just enable that repo and use
yum to install it.
Not provided int CentOS 5:
snip
Nothing to do
[EMAIL PROTECTED]
On Friday 06 July 2007 11:19, Lorenzo wrote:
Garrick Staples ha scritto:
On Fri, Jul 06, 2007 at 05:09:46AM +0100, John Bowden alleged:
On Friday 06 July 2007 04:44, Garrick Staples wrote:
On Fri, Jul 06, 2007 at 04:30:58AM +0100, John Bowden alleged:
The sound card is an on board one.
On Wed, 2007-07-04 at 09:39 +0530, Indunil Jayasooriya wrote:
Hi,,
I have installed xine in order to watch movies. I have some Rip
quality(DVDRiP) movies. When I watch these, I can see the movie. But,
Not clear. vision is bad.
Do you know why? How to solve this?
pls see below for the
Jerry Geis wrote:
I have 2 machines running centos. each machine has 2 network cards.
Box 1:
eth1: T1 connection 74.X.X.X
eth0: office connection 192.X.X.X
Box 2:
eth1: Cable modem 24.X.X.X
eth0: office connection 192.X.X.X
How do I issue a route command on each box so it will use
I have 2 machines running centos. each machine has 2 network cards.
Box 1:
eth1: T1 connection 74.X.X.X
eth0: office connection 192.X.X.X
Box 2:
eth1: Cable modem 24.X.X.X
eth0: office connection 192.X.X.X
How do I issue a route command on each box so it will use
eth0 as the shortest route
John Bowden ha scritto:
I have a similar board from Asrock which has apparently the same onboard
audio card; on my FC5 install the audio module used is snd-hda-intel and
the sound works... the relevant section in /etc/modules.conf is:
alias snd-card-0 snd-hda-intel
options snd-card-0 index=0
I am looking at T38Modem. A relatively new version is ready for someone
to build an rpm for (Mar '07).
But the readme warns:
Q. I try to use T38modem, but after run t38modem -p ttyx0 I get a message
Could not open /dev/ptyx0: No such file or directory.
A. Looks like you don't have legacy
Trixbox is supplying a rather old version of IAXModem, 0.1.14, where
current is 0.3
Does anyone know of where a version is available more current than 0.1.14?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 7/6/07, Robert Moskowitz [EMAIL PROTECTED] wrote:
I am looking at T38Modem. A relatively new version is ready for someone
to build an rpm for (Mar '07).
But the readme warns:
Q. I try to use T38modem, but after run t38modem -p ttyx0 I get a message
Could not open /dev/ptyx0: No such
On 7/6/07, Robert Moskowitz [EMAIL PROTECTED] wrote:
I am looking at T38Modem. A relatively new version is ready for someone
to build an rpm for (Mar '07).
But the readme warns:
Q. I try to use T38modem, but after run t38modem -p ttyx0 I get a message
Could not open /dev/ptyx0: No such
Andrew @ ATM Logic spake the following on 7/6/2007 4:39 AM:
Hi,
Can you explain what have you tried till now? All I can say
man mdamd is sufficient.
--
Regards,
Sudev Barar
___
CentOS mailing list
CentOS@centos.org
On Fri, 2007-07-06 at 13:56 -0400, Jim Perrin wrote:
On 7/6/07, Robert Moskowitz [EMAIL PROTECTED] wrote:
I am looking at T38Modem. A relatively new version is ready for someone
to build an rpm for (Mar '07).
But the readme warns:
Q. I try to use T38modem, but after run t38modem -p
On 7/6/07, William L. Maltby [EMAIL PROTECTED] wrote:
A. Looks like you don't have legacy PTY devices compiled in your kernel.
You need to re-compile the kernel with 'Legacy PTY Support'.
Is this an issue for Centos 4.4 and/or Centos 5?
On centos4:
grep -i pty /boot/config-2.6-9-*
On Friday 06 July 2007 17:49:13 Lorenzo wrote:
John Bowden ha scritto:
I have a similar board from Asrock which has apparently the same onboard
audio card; on my FC5 install the audio module used is snd-hda-intel and
the sound works... the relevant section in /etc/modules.conf is:
alias
On Fri, 6 Jul 2007, Radu-Cristian FOTESCU wrote:
EPEL? I thought that was clear enough, and since EPEL users are RHEL
users + CentOS users + SL users + StartCom users, I also believed [some
of] you should already be using EPEL, some of you needing more, and some
of you already
On Fri, 2007-07-06 at 22:53 +0200, Dag Wieers wrote:
I'm once again sorry for sending this to the list. Sigh.
I guess, I need a mail client that protects the mailinglist from me.
Nah! The fact that nobody else argues with you on this list may help
convince Radu that he is mistaken. And it is
On 7/6/07, William L. Maltby [EMAIL PROTECTED] wrote:
Well, you probably have two out of three now. 66% success is not bad in
this life! :-)
Maybe for public school folks... around here that's a low D, and I
expect better from the CentOS community dammit!
/sorry, couldn't resist...
//I'm
We have a large MySQL database currently running on a CentOS 3.x
server with an external SCSI RAID device. This is currently an ext2
filesystem because it was migrated once previously from an even older
RedHat system. We need to add storage capacity to this database and
prepare for additional
Robert Moskowitz wrote:
Trixbox is supplying a rather old version of IAXModem, 0.1.14, where
current is 0.3
Does anyone know of where a version is available more current than 0.1.14?
www.asterisk.org?
___
CentOS mailing list
CentOS@centos.org
--- Dag Wieers [EMAIL PROTECTED] wrote:
I'm once again sorry for sending this to the list.
Sigh.
I guess, I need a mail client that protects the
mailinglist from me.
-- dag wieers, [EMAIL PROTECTED],
http://dag.wieers.com/ --
[all I want is a warm bed and a kind word and
I need to get a new computer and am looking at Intel E6600 Core 2
Duo. I'll be running Centos5.
I have a couple of VMware Workstation 6 licenses, is there a way to
install and run 64 bit inside an VMware virtual machine?
I don't care about performance, it's only for testing and
debugging
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, July 06, 2007 9:10 PM
To: CentOS mailing list
Subject: [CentOS] 64 bit
I need to get a new computer and am looking at Intel E6600 Core 2
Duo. I'll be running
On 7/6/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I need to get a new computer and am looking at Intel E6600 Core 2
Duo. I'll be running Centos5.
I have a couple of VMware Workstation 6 licenses, is there a way to
install and run 64 bit inside an VMware virtual machine?
I don't care
On Thu July 5 2007 06:29, Indunil Jayasooriya wrote:
[EMAIL PROTECTED] master]# cat example77.com.zone
$TTL86400
@ IN SOA gateway.example77.com. root.example77.com. (
2006101604 ; Serial
1800 ; Refresh
Hi
I am trying to use Bind as named. And I have successfully set up a chrooted
bind.
Anyway, I cannot have it resolve www directly.
For example, when I am using nslookup, when enter www.example.com, it will
resolve. But when enter www, it will not.
I want to have www resolve to
On Sat, Jul 07, 2007 at 12:58:03PM +0800, Wei Yu alleged:
Hi
I am trying to use Bind as named. And I have successfully set up a chrooted
bind.
Anyway, I cannot have it resolve www directly.
For example, when I am using nslookup, when enter www.example.com, it will
resolve. But when
40 matches
Mail list logo