Hello ,
I use Centos 5.4 , with the redhat version of xen .
I need for some guest to change the hardware for the network .
So in my xen config i add the model option in the vif line .
When the guest boot , i had the right emulation , but after a reboot , the
guest loose the configuration .
Los path que referencias tus jsp, quizás estén apuntando a directorios de la
maquina que si puedes resolver de modo local, tienes clausulas directory,
Alias?
Podrias indicar la config de apache.
El 20 de mayo de 2010 17:55, Marcelo Silva Robles
msilvarob...@yahoo.comescribió:
Revisa el
vim /etc/sysconfig/selinux y cambia disable por enable. o puedes usar
la herramienta grafica de CentOS system-config-selinux para habilitarlo.
Saludos.
El 24 de mayo de 2010 08:20, Jose Alberto Torres Paredes
jalber...@hotmail.com escribió:
necesito desactivar el selinux como puedo hacer
Justo como dice Carlos, sólo complementaré:
Para deshabilitarlo permanentemente edita el archivo /etc/selinux/config
y cambia la parte donde dice enforcing por disable.
Para deshabilitarlo temporalmente utiliza el comando #setenforce 0,
esto deshabilitará pero al siguiente reinicio volverá.
You might want to jump on the nagios list, and ask about monitoring a process
on a box.
---
Kind Regards,
Mr Gabriel (bberry mail)
-Original Message-
From: Jatin Davey jasho...@cisco.com
Date: Mon, 24 May 2010 10:36:38
To: centos@centos.org
Subject: [CentOS] Naming of a Java Process in
*Try htop, it might help you.*
*http://htop.sourceforge.net/index.php?page=main
*--
Best Wishes,
Waleed Harbi
Dream | Do | Be
On Mon, May 24, 2010 at 9:20 AM, Mr Gabriel gabr...@impactteachers.comwrote:
You might want to jump on the nagios list, and ask about
I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel
S3200SH
mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid
onboard.
I had configured the LSI to have Sata0 and Sata1 with raid 1 and the
third
drive as a hotspare drive.
Format the harddisk and
linux box. So currently when i have these procs running on my box they
show up as java in the ps -A command. I dont know for sure as to which
if you can use the 'f' option in your ps command, you will get the
arguments used to start the JVM. This may provide you with enough
information to
On 05/23/2010 01:57 PM, Les Mikesell wrote:
Robert Nichols wrote:
Another thing to keep in mind is that the SATA spec. only requires the
internal SATA connector to withstand 50 insertions. I picked up some
nice acomdata (TM) eSATA housings for the drives (512-byte sectors,
thankfully) I use
hai
i have a perl script which will automatically check for the existing files
and then ftp them to a server, this one runs in a loop until i kill it, now
what i wants is i want to make this as a service so that it can keep on
running until i kill the service. so does any one have an idea how to
On Mon, May 24, 2010 at 9:59 AM, Chaitanya Yanamadala
dr.virus.in...@gmail.com wrote:
hai
i have a perl script which will automatically check for the existing files
and then ftp them to a server, this one runs in a loop until i kill it, now
what i wants is i want to make this as a service so
Hai Chaitanya,
On 24 May 2010 14:59, Chaitanya Yanamadala dr.virus.in...@gmail.com wrote:
hai
i have a perl script which will automatically check for the existing files
and then ftp them to a server, this one runs in a loop until i kill it, now
what i wants is i want to make this as a
CList wrote:
Hi,
I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel S3200SH
mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid
onboard.
fake-raid alert!
I had configured the LSI to have Sata0 and Sata1 with raid 1 and the third
drive as a
On Mon, May 24, 2010 at 07:29:21PM +0530, Chaitanya Yanamadala wrote:
hai
i have a perl script which will automatically check for the existing files
and then ftp them to a server, this one runs in a loop until i kill it, now
what i wants is i want to make this as a service so that it can
hai all
thank you for your replies.
but can you send me some examples so that i can understand the things more
better..
i am quite new to linux..
so can u help me out.
Chaitanya
On Mon, May 24, 2010 at 8:03 PM, Jerry McAllister jerr...@msu.edu wrote:
On Mon, May 24, 2010 at 07:29:21PM
Le 2010-05-24 à 06:21, Mathieu Baudier a écrit :
linux box. So currently when i have these procs running on my box they
show up as java in the ps -A command. I dont know for sure as to which
if you can use the 'f' option in your ps command, you will get the
arguments used to start the JVM.
On 5/24/2010 4:10 AM, CList wrote:
I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel
S3200SH
mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid
onboard.
I had configured the LSI to have Sata0 and Sata1 with raid 1 and the
third
I was able to successfully install from an 8GB USB flash drive (4GB is
not quite big enough, even for i386) created with this procedure:
Create a 10M DOS partition and make it active
Create Linux partition using the rest of the drive
mkfs -t vfat the DOS partition
mkfs the Linux
Chaitanya Yanamadala wrote:
hai all
thank you for your replies.
but can you send me some examples so that i can understand the things
more better..
Hi
Have a look in the scripts in /etc/init.d/, some of them can be little
bit complex, but worth the time to learn. You can start with
Jatin,
On 24 May 2010 06:06, Jatin Davey jasho...@cisco.com wrote:
show up as java in the ps -A command. I dont know for sure as to which
java process belongs to which component of my appliacation. Hence what i
do is add up all the resource utilization values for all java processes
Add a
thank u marcelo.
so after creating a file how do i add it to service list.
coz when i create a new file in /etc/init.d it is not appearing in the
services list..
Chaitanya
A man can get discouraged many times but he is not a failure until he stops
trying...
The difference between 'involvement'
Weiner, Michael wrote, On 05/24/2010 10:28 AM:
List Readers -
I have a Dell server that uses the Perc 6i controller and had 5 1Tb
disks installed (1 for OS and the other 4 in a Raid0 for a large storage
pool).
[r...@gc-server2 ~]# fdisk -l /dev/sdc
Disk /dev/sdc: 2199.0
On Mon, May 24, 2010 at 10:28 AM, Weiner, Michael wein...@ccf.org wrote:
List Readers –
I have a Dell server that uses the Perc 6i controller and had 5 1Tb disks
installed (1 for OS and the other 4 in a Raid0 for a large storage pool).
The owner of the server wanted me to swap out the 1Tb
On May 24, 2010, at 11:06 AM, Chaitanya Yanamadala wrote:
so after creating a file how do i add it to service list.
coz when i create a new file in /etc/init.d it is not appearing in the
services list..
man chkconfig
-steve
--
If this were played upon a stage now, I could condemn it as
Chaitanya Yanamadala wrote:
so after creating a file how do i add it to service list.
coz when i create a new file in /etc/init.d it is not appearing in the
services list..
Chaitanya
Hi
Then you use chkconfig to manage when the service will start,
something like chkconfig --add
Todd Denniston, On Monday, May 24, 2010 11:15 AM
Are you sure that the Perc was not presenting you with a logical disk
(Volume)?
One I received from dell, with RHEL on it, was setup with 8 disks in a
raid5 and the controller was
presenting the whole array as two drives, i.e., no physical
Brian Mathis, On Monday, May 24, 2010 11:17 AM
Since the disk was connected through a RAID controller it's most
likely that the disk is formatted for the custom format that the RAID
controller uses. The controller then presents that disk to the OS.
You're going to have to put the drive back
Weiner, Michael wrote, On 05/24/2010 11:38 AM:
Todd Denniston, On Monday, May 24, 2010 11:15 AM
BTW had your support contract ran out with Dell/RH?
We do have support on the box, but don't purchase a RHEL license and we
run CentOS instead
you might get lucky with a vgscan or
Todd Denniston wrote:
Weiner, Michael wrote, On 05/24/2010 11:38 AM:
Todd Denniston, On Monday, May 24, 2010 11:15 AM
BTW had your support contract ran out with Dell/RH?
We do have support on the box, but don't purchase a RHEL license
Todd Denniston, On Monday, May 24, 2010 11:50 AM
To: CentOS mailing list
With the Dell support, you could call Dell and ask how they expect the
Perc to work with the disk
upon reinsertion.
Should at least letup your nerves.
Thanks Todd, I think I will have to resort to that :)
Michael
Hello All,
I had problems with the security server, the server is frequently
attacked using bruteforce attacks. Is there an application that can
perform automatic blocking when there are failed login to the ports
smtp, pop3 port, and others?
I am currently using CentOS 5.5 in some servers
Google something called fail2ban :)
---
Kind Regards,
Mr Gabriel (bberry mail)
-Original Message-
From: David Suhendrik da...@pnyet.web.id
Date: Mon, 24 May 2010 23:55:05
To: CentOS mailing listcentos@centos.org
Subject: [CentOS] [WTA] Automatically blocking on failed login
Hello All,
I had problems with the security server, the server is frequently
attacked using bruteforce attacks. Is there an application that can
perform automatic blocking when there are failed login to the ports
smtp, pop3 port, and others?
I am currently using CentOS 5.5 in some servers
On 05/20/2010 07:55 AM, Digimer wrote:
So let me see if I've got this straight (sorry, I'm coming from a
Debian background)...
1. I need to create my own local repo which revisor will draw from.
Creating a local repo is basically the effect of running revisor. If
you keep a copy of the
On 5/24/2010 6:56 AM, Robert Nichols wrote:
The trayless internal hotswap enclosures claim to be good for 10,000+
insertions
and I'm using larger ones for the desktop drives I had been using without any
problems. I have seen some postings to the effect that I need a newer
kernel
to
David Suhendrik wrote:
Hello All,
I had problems with the security server, the server is frequently
attacked using bruteforce attacks. Is there an application that can
perform automatic blocking when there are failed login to the ports
smtp, pop3 port, and others?
I am currently using
David Suhendrik wrote:
Hello All,
I had problems with the security server, the server is frequently
attacked using bruteforce attacks. Is there an application that can
perform automatic blocking when there are failed login to the ports
smtp, pop3 port, and others?
I am currently using
On Mon, May 24, 2010 at 11:43 AM, Weiner, Michael wein...@ccf.org wrote:
Brian Mathis, On Monday, May 24, 2010 11:17 AM
...
PPS. You might have a reason, but it would be irresponsible not to
point out that by using RAID0 you now have an exponential risk of
losing all of that data.
The Raid0
On 05/20/2010 04:38 PM, Kahlil Hodgson wrote:
On 05/21/2010 12:55 AM, Digimer wrote:
3. Run revisor as you've both discussed.
My goal is to create a much smaller DVD, more than anything.
I think the smallest you can get away with for a non-graphical install
is something like
%packages
On 05/21/2010 02:02 PM, Ski Dawg wrote:
Thanks to everyone else for the replies on this topic. I scanned
through all of the logs for the last month, and this has only come up
twice in that entire time, and I believe they change that I made to
redirect them to http://www.domainname.com (instead
Hello All,
I had problems with the security server, the server is frequently attacked
using bruteforce attacks. Is there an application that can perform automatic
blocking when there are failed login to the ports smtp, pop3 port, and
others?
I am currently using CentOS 5.5 in some servers
On 05/20/2010 09:57 PM, Ryan Manikowski wrote:
Could not retrieve mirrorlist
http://mirrorlist.centos.org/?release=5arch=i386repo=addons error was
[Errno 4] IOError:urlopen error (-3, 'Temporary failure in name
resolution')
Error: Cannot find a valid baseurl for repo: addons
Disable the
On Mon, 2010-05-24 at 23:55 +0700, David Suhendrik wrote:
Hello All,
I had problems with the security server, the server is frequently
attacked using bruteforce attacks. Is there an application that can
perform automatic blocking when there are failed login to the ports
smtp, pop3 port, and
Perhaps he has an invalid URL specified only for addons and not base/updates?
thanks,
-Drew
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of
Karanbir Singh
Sent: Monday, May 24, 2010 3:17 PM
To: CentOS mailing list
Subject: Re: [CentOS]
Quoting Karanbir Singh mail-li...@karan.org:
On 05/20/2010 09:57 PM, Ryan Manikowski wrote:
Could not retrieve mirrorlist
http://mirrorlist.centos.org/?release=5arch=i386repo=addons error was
[Errno 4] IOError:urlopen error (-3, 'Temporary failure in name
resolution')
Error: Cannot find a
On 05/24/2010 08:26 PM, Drew Weaver wrote:
Perhaps he has an invalid URL specified only for addons and not base/updates?
look at the error, specially the bit where it says 'Temporary failure in
name resolution'
And please dont top post, its not like you are new to mailing lists
- KB
On 05/24/2010 12:41 PM, Les Mikesell wrote:
On 5/24/2010 6:56 AM, Robert Nichols wrote:
The trayless internal hotswap enclosures claim to be good for 10,000+
insertions
and I'm using larger ones for the desktop drives I had been using without
any
problems. I have seen some postings to
47 matches
Mail list logo