El día 14 de diciembre de 2013, 10:08, David González Romero
dgrved...@gmail.com escribió:
Normalmente la importanción la hacia con puras sentencias
INSER INTO tbl .. VALUE (..);
Ahora que me dices de configuración estaré viendo eso, porque no me quería
quedar sin las dudas
En alcance libre acaban de publicar un articulo
Problema en MySQL en CentOS y Red Hat Enterprise Linux 6.5
Joel Barrios Dueñas, 16/12/2013, 06:45. 57 lecturas.
http://www.alcancelibre.org/article.php/problema-mysql-centos-rhel-65
___
CentOS-es
Estimado,
Estas entrando de forma pasiva o activa.
no recuerdo muy bien pero el pasivo ocupa puertos sobre el 1024 para
establecer conexion además del 20 y 21. eso lo debes configurar en tu ftp y
abrir esos puertos.
dentro de tu red lan abre sin problemas por mucha razones, depende del
diseño de
@pablo gracias por responder...
El firewall de mi maquina tiene abiertos los puertos FTP (20 y 21), el
firewall del router también (apuntando al mismo IP del equipo con ftp), y
la configuración del vsftpd es:
*shell# cat /etc/vsftpd/vsftpd.conf*
anonymous_enable=NO
local_enable=YES
falta definir los puertos pasivos
pasv_min_port=10190
pasv_max_port=10199
esos puerto los puedes cambiar a gusto.
tambien debes abrir en tu iptables
Saludos
El 16 de diciembre de 2013, 14:04, angel jauregui
darkdiabl...@gmail.comescribió:
@pablo gracias por responder...
El firewall de mi
aps.
olvide esta linea
pasv_enable=Yes
El 16 de diciembre de 2013, 15:32, Pablo Alberto Flores
pabfl...@uchile.clescribió:
falta definir los puertos pasivos
pasv_min_port=10190
pasv_max_port=10199
esos puerto los puedes cambiar a gusto.
tambien debes abrir en tu iptables
Saludos
El
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a server with a faulty power supply that resets the server every 4/5
hours.
While I wait for the supplier to change the PS, I am facing an issue with MySQL.
When the system comes back on, mysqld script starts the daemon, but the
connections
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a server with a faulty power supply that resets the server every 4/5
hours.
While I wait for the supplier to change the PS, I am facing an issue with MySQL.
When the system comes back on, mysqld script starts the daemon, but the
connections
On Mon, 16 Dec 2013 10:51:54 +0100
Luigi Rosa li...@luigirosa.com wrote:
I have a server with a faulty power supply that resets the server
every 4/5 hours.
While I wait for the supplier to change the PS, I am facing an issue
with MySQL.
When the system comes back on, mysqld script
On 12/15/2013 10:23 PM, Keith Keller wrote:
CentOS *IS* RHEL rebuilt without branding and offered without support
contracts. So saying the needs of the user differ is specious.
I disagree. The people RH may be targetting for purchasing RHEL7 may
very well be different from the people
I meant the actual implementation, I knew it would be GNOME Classic. This
beta release is awful. I lost count of how many devel packages were
missing now, I think I had to rebuild over 20 of their source rpms to get
them while I was toying with Cairo Dock. Not to mention that desktop, 4
ways to
From: Adrian Sevcenco adrian.sevce...@cern.ch
if i try to remove them, yum tries to uninstall all
system (447 packages 1.4 gb)!!
What about a simple rpm -e PKG ?
JD
___
CentOS mailing list
CentOS@centos.org
Hi all,
I had centos 5.9 installed with one of its volumes (non-root) on LVM:
...
/dev/vgapps/lvapps /opt/apps ext3defaults1 2
...
Then installed centos 6.4 on this servers but without exporting this volume (I
wanted to reuse it).
After that instead importing it I
From: Stephen Harris li...@spuddy.org
Having pages in swap is not indicative of a problem; what's more
important is the level of swap _activity_. See vmstat output, for
example, to determine how much swap activity is occuring. If that's
zero then you're not throwing new pages out to swap.
Hey,
I have a new laptop for which CentOS 6.5 says hardware not supported, but it
still seems to work.
So I was happy to hear about the beta and naively planning to wait until 7.0 to
install it...
But, seeing that RHEL 6 beta-stable took around 6 months, and add to that the
CentOS hard work...
To give additional data - currently I have the following:
# pvs
File descriptor 7 (pipe:[76957]) leaked on pvs invocation. Parent PID 15357:
bash
PVVG Fmt Attr PSize PFree
/dev/sddlmab2 vg01 lvm2 a-- 14.47g 480.00m
/dev/sddlmac vgapps lvm2 a-- 50.00g 50.00g
But vgapps
On Mon, Dec 16, 2013 at 12:55 AM, Adrian Sevcenco
adrian.sevce...@cern.ch wrote:
Running 'yum-complete-transaction' will usually fix things up. If
you don't have it you should be able to 'yum install yum-utils'
without affecting the old incomplete transaction.
both
1.
Try to export your calendars and import them on a fresh install, see if
the problem persists.
Don't think I can do that with Exchange calendars.
Anyway, the CentOS6 version works fine, even coming from a 17.x profile, so
there definitely is a problem with the CentOS5 version.
Am 16.12.2013 um 17:21 schrieb Lars Hecking lheck...@users.sourceforge.net:
Try to export your calendars and import them on a fresh install, see if
the problem persists.
Don't think I can do that with Exchange calendars.
Anyway, the CentOS6 version works fine, even coming from a 17.x
On Sun, 15 Dec 2013, Darr247 wrote:
I see 2 components in ps4.jpg that look like they've ruptured.
One in the mid/foreground with the yellow hot glue on it (the shorter
The one with the visible VENT and 105 printing?
one, between the inductor and the caps), and one hiding under the
harness
On Sat, 14 Dec 2013, John R Pierce wrote:
me, if I had any reason to suspect a power supply, I would just get a
new one, basic PC power supplies in reasonable wattage ratings are quite
cheap. examples:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817152032
On 12/13/2013 16:35, Michael Hennebry wrote:
I note the absence of PAE for CentOS.
I've read that PAE can be important.
Only if you're trying to address more than 4 GB of RAM on a 32-bit
system. Even then, most software doesn't take advantage of it.
PAE is an old hack Intel invented in the
On 12/15/2013 16:21, Michael Hennebry wrote:
the yellow stuff looks suspicious.
It's a kind of strain relief. Without that flexible glue, dropping the
computer could snap those caps off at their base. Since this is the
sort of thing that occasionally happens to computers in shipping,
On Mon, Dec 16, 2013 at 11:28 AM, Warren Young war...@etr-usa.com wrote:
On 12/13/2013 16:35, Michael Hennebry wrote:
I note the absence of PAE for CentOS.
I've read that PAE can be important.
Only if you're trying to address more than 4 GB of RAM on a 32-bit
system. Even then, most
On 12/15/2013 16:49, Michael Hennebry wrote:
Looks like I'll need to see whether I still have my multimeter.
That's not likely to tell you much.
About the only thing I'd trust a typical DMM to tell me about a PSU is
whether its rails are within voltage spec. You must do that test under
On 12/16/2013 09:53, Michael Hennebry wrote:
The one with the visible VENT and 105 printing?
Vent just calls out that there is a vent on the top of the cap, which
it obvious without the label. It's the scoring in the metal, which
allows the top of the cap to break open in a controlled way if
On 12/16/2013 8:56 AM, Michael Hennebry wrote:
From this, I infer that 20-pin ATX's are sufficiently standardized
that I do not need to be model- or brand-specific.
well, ATX 1.x stuff had more 5V and less 12V, while ATX 2.x boosts the
12V output capacity and has less 5V... I'm pretty sure
On 12/16/2013 10:03 AM, John R Pierce wrote:
On 12/16/2013 8:56 AM, Michael Hennebry wrote:
From this, I infer that 20-pin ATX's are sufficiently standardized
that I do not need to be model- or brand-specific.
well, ATX 1.x stuff had more 5V and less 12V, while ATX 2.x boosts the
12V output
At 10:27 AM 12/16/2013, you wrote:
On 12/16/2013 10:03 AM, John R Pierce wrote:
On 12/16/2013 8:56 AM, Michael Hennebry wrote:
From this, I infer that 20-pin ATX's are sufficiently standardized
that I do not need to be model- or brand-specific.
well, ATX 1.x stuff had more 5V and less 12V,
I'm using CentOS 6.5 and have one connection open to a system in my student
doing a software install. I set up a second RDP connection (Applications -
Internet - Terminal Server Client), but when I double click on it, it will
not run. Is there a way to have more than one running?
-wes
On Mon, Dec 16, 2013 at 12:37 PM, Wes James compte...@gmail.com wrote:
I'm using CentOS 6.5 and have one connection open to a system in my
student doing a software install. I set up a second RDP connection
(Applications - Internet - Terminal Server Client), but when I double
click on it, it
On 16 December 2013 @16:53 zulu, Michael Hennebry wrote:
On Sun, 15 Dec 2013, Darr247 wrote:
I see 2 components in ps4.jpg that look like they've ruptured.
One in the mid/foreground with the yellow hot glue on it (the shorter
The one with the visible VENT and 105 printing?
No. The short one
On Mon, 16 Dec 2013, John R Pierce wrote:
On 12/16/2013 10:03 AM, John R Pierce wrote:
On 12/16/2013 8:56 AM, Michael Hennebry wrote:
From this, I infer that 20-pin ATX's are sufficiently standardized
that I do not need to be model- or brand-specific.
well, ATX 1.x stuff had more 5V and less
On 12/16/2013 08:28 PM, Michael Hennebry wrote:
btw, here's the technical product manual for your mainboard
http://downloadmirror.intel.com/15207/eng/D865GBF_D865GLC_ProductGuide02_English.pdf
That is where I got the 20-pin ATX stuff.
It just occured to me that I might want
geometric as
I am new to kickstart file, but my understanding of the process is that I
am supposed to be able to take the anaconda-ks-cfg file from the /root
directory, copy it to an accessible location, and point the install disk to
it, and it should reproduce the install I did originally.
I used the 6.5
On 12/16/2013 10:52 PM, Ted Miller wrote:
I read the kickstart file and found the Centos reference in the repo
line, which the docs say is optional. I commented out that line, and the
file works fine.
its possible the url the --repo line was pointing at was either invalid
or not
On 12/16/2013 07:53 PM, Karanbir Singh wrote:
On 12/16/2013 10:52 PM, Ted Miller wrote:
I read the kickstart file and found the Centos reference in the repo
line, which the docs say is optional. I commented out that line, and the
file works fine.
its possible the url the --repo line was
I have tried more than half a dozen different combinations of the color
command in my grub.conf file, and see nothing but black and white.
Is there
* a problem with the Centos grub command?
* a problem with grub figuring out how to do color on my hardware?
* a true-false day, when everything is
Hi.
I used VMware Standalone converter 5.5 to convert a CentOS 5.3 machine from
a Physical server to a Virtaul Machine on ESXi 5.1 . Thus far with every
attempt to convert this machine I get a Kernel panic
mount: could not find filesystem '/dev/root'
setuproot: moving /dev failed: No such file
On Tue, 17 Dec 2013, Gregory Machin wrote:
Hi.
I used VMware Standalone converter 5.5 to convert a CentOS 5.3 machine from
a Physical server to a Virtaul Machine on ESXi 5.1 . Thus far with every
attempt to convert this machine I get a Kernel panic
mount: could not find filesystem
40 matches
Mail list logo
