On 2019-02-28, Christian, Mark wrote:
> On Wed, 2019-02-27 at 19:39 -0500, mark wrote:
>> I just wanted to set up to send an encrypted message, so I went to
>> generate a
>> public/private key pair using gpg on C 6.
>>
>> Version 2.0.14, copyright 2009?
>>
>> Isn't there something newer than
hi Phil.
I do have hardware that uses the 340xx, 384.98 drivers. Basically 520M and
GT218 ION.
Thanks!
Jerry
>
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Wed, Feb 27, 2019 at 02:35:30PM +0100, Ger van Dijck wrote:
>
> The problems with HPlip goes on and on : I can not manage to establish a
> connection on WiFi with the HP4620 : I can print to the printer but not scan
> . Running hp-check results in cups is not running, hplip is not properly
>
Helo,
we have had well runnung amanda tape backup with 3.3.3.-17 in CentOS 7.
Two weeks ago we updated the server und got the new release. Now LEOM
will no longer be correct recognized.
Other experince?
How to downgrade? amanda is part of base repository and no former
release will be found by
Sorry, here's the guide I just started.
https://gitlab.com/Pipfrosch/smtp-secure-relay-policy
Why from a different e-mail address?
That's something the list admins need to look into, it seems every time I
post to this list within seconds I end up on Spamhaus blacklist.
Doesn't happen
On Fri, Mar 1, 2019 at 11:53 AM Ben Archuleta wrote:
> I need to set up a new mail server to replace an aging CentOS 6.3 mail
> server. I was wondering what were some of the best guides on the web for
> Postfix (Maildir), Spamassassin, ClamAV, Dovecot?
>
The one I've seen as a long time
On 3/1/19 9:53 AM, Ben Archuleta wrote:
Hello All,
I need to set up a new mail server to replace an aging CentOS 6.3 mail server.
I was wondering what were some of the best guides on the web for Postfix
(Maildir), Spamassassin, ClamAV, Dovecot?
Probably not what you are looking for and it
Hello All,
I need to set up a new mail server to replace an aging CentOS 6.3 mail server.
I was wondering what were some of the best guides on the web for Postfix
(Maildir), Spamassassin, ClamAV, Dovecot?
Regards,
Ben Archuleta
___
CentOS mailing
Il Ven 1 Mar 2019, 17:28 Warren Young ha scritto:
> On Feb 21, 2019, at 4:42 PM, Gianluca Cecchi
> wrote:
> >
> > Create a file 00-monitor.conf under /etc/x11/xorg.conf.d
> >
> > Something like this below, using conservative range values for horiz and
> > vert syncs
>
> This works fine here on
On Feb 21, 2019, at 4:42 PM, Gianluca Cecchi wrote:
>
> Create a file 00-monitor.conf under /etc/x11/xorg.conf.d
>
> Something like this below, using conservative range values for horiz and
> vert syncs
This works fine here on our test monitors, with the exception that the first
‘x’ needs to
On 2/28/19 10:04 PM, Jobst Schmalenbach wrote:
On Thu, Feb 28, 2019 at 05:19:49PM +0100, Nicolas Kovacs (i...@microlinux.fr)
wrote:
Le 28/02/2019 à 04:12, Jobst Schmalenbach a écrit :
I want to lock in the SDA/SDB/SDC for my drives
In short : use UUIDs or labels instead of hardcoding
César, muchas gracias por tus sugerencias, el punto 1 si lo había probado
ayer sin éxito, del punto 2 probé solo lo de restorecon, pero aparentemente
no estaba instalado en el servidor por lo que no surtió efecto, pero al
revisar los log gracias a tu recomendación, pude ver un mensaje que
Send CentOS-announce mailing list submissions to
centos-annou...@centos.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
On Friday 01 March 2019 09:52:52 Pete Biggs wrote:
> Just as an added bit of information (because I see you are getting avc
> issues as well).
>
> I often see this when using Intel firmware raid - it basically comes
> down to the initialisation of the RAID being a quite long process and
> if
On Friday 01 March 2019 05:26:09 Simon Matter via CentOS wrote:
> Maybe you could try a network install and only use the USB DVD to boot. I
> remember similar issues while installing servers using remote iso to
> install via USB drive emulation with the servers management hardware.
Hi Simon,
I
On Thu, 2019-02-28 at 18:19 +, Gary Stainburn wrote:
> I'm doing a new install, and everything seems to have gone fine apart from
> the
> incredible amount of time it's taken.
>
> It does have 6 x 4TB drives in RAID6 and I am installing from a USB DVD
> drive
> as I had no SATA ports
Saludos.
Parece ser un error relacionado con los contextos de SELinux del
archivo .ssh/authorized_keys o de permisos. Prueba lo siguiente:
1) Corrige o revisa los permisos del directorio y del archivo:
chown -R root.root .ssh
chmod 700 .ssh
chmod 600 .ssh/authorized_keys
2) Aplica nuevamente
17 matches
Mail list logo
