I've tried that too and it was a good suggestion
as su now crashes only if you enter a wrong password.
I've also tried to rebuild rpmforge srpm with no luck.
Could you really make this thing work? I mean did it
actually block anything after a series of failed logins?
As I said,
Yesterday I installed pam_shield and followed the testing suggested and
thought all was well.
today I find that I cannot get to my email account, I can login via ssh
okay
(uses keys) but su and sudo give
segmentation faults. I am guessing due to the pam module causing a problem.
Yesterday I installed pam_shield and followed the testing suggested and
thought all was well.
today I find that I cannot get to my email account, I can login via ssh
okay
(uses keys) but su and sudo give
segmentation faults. I am guessing due to the pam module causing a
problem.
Yesterday I installed pam_shield and followed the testing suggested and
thought all was well.
today I find that I cannot get to my email account, I can login via ssh
okay (uses keys) but su and sudo give
segmentation faults. I am guessing due to the pam module causing a problem.
As I
CentOS 5.4 64-bit with SELinux, happily running for over a year, suddenly
httpd fails to start up, getting an error message like:
Starting httpd: Syntax error on line X of /etc/httpd/conf.d/php.conf:
Cannot load /etc/httpd/modules/libphp5.so into server: libxml2.so.2:
failed to map segment
Can anyone provide advice on how to bring up networking in Single User
Mode?
I need to specify an IP, mask, gateway and bring up the adaptor so I
can ssh into another machine to transfer files to it.
# service network start ?
___
CentOS
In the course of my experiments with rt kernels
it so happens that the gui versions of tuna built
from upstream (RHEL, F11) SRPMs show wrong affinity settings
for IRQ threads.
It wasn't actually a tuna bug but rather misunderstanding on my part.
When tuna-0.8.4-1 gui is being used to set IRQ
# cat /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
max_allowed_packet=2MB
[mysqld_safe]
If I perform matchpathcon /var/whatever I still get var_t as
its default type. Then again, why it kept the httpd_sys_content_t after the
relabel?
I did the same test on Fedora 10 (which of course is way newer than Centos)
and it behaves different (the way I had in mind): after a
Hi,
In the course of my experiments with rt kernels
it so happens that the gui versions of tuna built
from upstream (RHEL, F11) SRPMs show wrong affinity settings
for IRQ threads.
Where would be a proper place to report this
and get some help on other rt-related issues?
Thanks,
Sasha
I've recently switched to the latest rt kernel
available from http://people.centos.org/hughesjr/kernel-rt
And one of the two problems I'm having with this new kernel
is that the logs have been flooded with nagios alerts
which indicate high percentage (50-60) of packet loss
when pinging
Hi all,
I've recently switched to the latest rt kernel
available from http://people.centos.org/hughesjr/kernel-rt
And one of the two problems I'm having with this new kernel
is that the logs have been flooded with nagios alerts
which indicate high percentage (50-60) of packet loss
when pinging
Are there any current plans to integrate MRG Realtime
into CentOS project?
Is the source of MRG open at all?
I was under the impression that it is one of those RH proprietary
available thru RHN.
The source for rt kernels at least is available at
Hello Johan,
thanks but i know that. I just want keep im my system packages x86_64. Why
yum return packages i386 when $basearch is x86_64?
Regards,
---
Eduardo Silvestre
nfsi telecom, lda.
eduardo.silves...@nfsi.pt
Tel. (+351) 21 949 2300 - Fax (+351) 21 949 2301
Not sure when it stopped working as I don't use it often. Maybe since the
upgrade from 5.2 to 5.3. Can't say for sure as it's been a while since
tried to start X.
The errors I receive when startin X are:
(EE) I810(0): unknown reason for exception
(EE) I810(0): cannot continue
Updated yesterday to the latest firefox from CentOS, and now RPMforge
flash-plugin will only play a few seconds of video (such as CNN,
iReport, etc.) at a time before becoming stuck; dragging the slider
back a little allows it to play a bit further, but then it stops
again. YouTube
Does anyone know of a howto on setting up raid1 on CentOS 5.x 64 bit?
You may try section 5.1. Creating the RAID Partitions
in RHEL Deployment Guide.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi, I have two very similar AMD based work stations running fully
current CentOS x86_64.
Both have 4Gb of RAM, both have
[rkam...@media ~]$ sudo rpm -qa |grep flash
flash-plugin-10.0.22.87-release.i386
[rkam...@media ~]$ sudo rpm -qa |grep fire
firefox-3.0.6-1.el5.centos.i386
Hi, I have two very similar AMD based work stations running fully
current CentOS x86_64.
Both have 4Gb of RAM, both have
[rkam...@media ~]$ sudo rpm -qa |grep flash
flash-plugin-10.0.22.87-release.i386
[rkam...@media ~]$ sudo rpm -qa |grep fire
firefox-3.0.6-1.el5.centos.i386
Hi, I have two very similar AMD based work stations running fully
current CentOS x86_64.
Both have 4Gb of RAM, both have
[rkam...@media ~]$ sudo rpm -qa |grep flash
flash-plugin-10.0.22.87-release.i386
[rkam...@media ~]$ sudo rpm -qa |grep fire
firefox-3.0.6-1.el5.centos.i386
Try
But, I shutdown Kerio and config MTA = sendmail.
Then
# service sendmail start
# hostname
mail.domain11.com
# echo test | mail -s test mail some...@domain22.com
I received is r...@mail.domain11.com
HOW?
With sendmail try to remove root from EXPOSED_USER list.
I have a number of vhosts configured with SuexecUserGroup
to run the scripts with limited privileges and the dept. web-site on one
of them. The problem is the webmaster can't read online context help
which comes with the cms the site is using. Most help files (2K) have
*.php.html extension.
I have a number of vhosts configured with SuexecUserGroup
to run the scripts with limited privileges and the dept. web-site on one
of them. The problem is the webmaster can't read online context help
which comes with the cms the site is using. Most help files (2K) have
*.php.html extension. *.php
Awhile ago I've tried to rebuild fc6 totem-xine in mock
but stopped short due to a large number of dependencies
as I wasn't sure of the result.
livna for FC6 is the totem-xine I'm using, I built all the dependencies
from Fedora/livna that were not in the centos/epel repos.
I
Awhile ago I've tried to rebuild fc6 totem-xine in mock
but stopped short due to a large number of dependencies
as I wasn't sure of the result.
livna for FC6 is the totem-xine I'm using, I built all the dependencies
from Fedora/livna that were not in the centos/epel repos.
I actually
For video - I use the totem plugin with xine backend totem. I
compiled
my own but I suspect that rpmforge has it. I found gstreamer backend
totem to be most unsatisfactory.
Could you please share some details on
how to get totem-xine running on CentOS?
I believe this could be
Michael A. Peters wrote:
For video - I use the totem plugin with xine backend totem. I
compiled
my own but I suspect that rpmforge has it. I found gstreamer backend
totem to be most unsatisfactory.
Hi guys,
Could you please share some details on
how to get totem-xine running on CentOS?
I
Client, Macintosh G4, OS X 10.4.11
NFS Mount is done with the following options...
-P (privileged ports)
intr
-r=32768
-w=32768
I tried doubling the size of the read/write windows to 65536 but it
seemed to make little difference.
Task, Read / Write 648 Megabyte Photoshop file (PSD)
Why today logrotate is not happen and Where can i verify the Logrotate
state
The logs are not necessarily rotated every day.
The default in /etc/logrotate.conf is weekly.
Look in /etc/logrotate.d for specific log rotation settings.
HTH
___
CentOS
I need to disable / stop X from running on a remote server, to which I
only have SSH access, and I have never done this before. So, can
someone please tell me how todo it?
telinit 3
If you need the server to stay at runlevel 3 after a reboot
change id:5:initdefault: to id:3:initdefault: in
I run CentOS 5.2 x86_64 on my workstation at home. Since 5.2 came out
with nepluginwrapper bundled into it, none of my plugins work. I
thought it was just a problem with the flash plugin, but neither the
mplayerplug-in plugins nor the adobe acrobat reader plugin work,
either.
I have no
31 matches
Mail list logo
