Dear Alexander;
Thanks for your reply but what you are saying could apply in Europe and USA but
not in Middle East.
I'm using these servers for around 5 years now and I know it's NEC with
FakeRaid ; please check these photos
https://drive.google.com/open?id=0BzqgoXi9IUMid3pNOXRZOHZuMkU
I
There's no option in BIOS to disable the RAID mode; this is NEC servers !!
Also; I have found that it's a bug in Centos 7 as per this pages:-
https://www.centos.org/forums/viewtopic.php?t=49069
https://bugs.centos.org/view.php?id=9813
From: Fawzy Ibrhim <fawzy_ibr...@yahoo.com>
To:
dmesg output has been pasted to http://paste.fedoraproject.org/409669/47144402/
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
I guess module ioatdma is missing in Centos 7:-
00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData
Technology Device (rev 22)
Subsystem: NEC Corporation Device 8372
Kernel driver in use: ioatdma
Kernel modules: ioatdma
# lsmod
Module Size
I have opened the case of the server and it's LSI card with FakeRaid !!
What I have to do now as lspci shows it as intel cards?
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
It's fakeRAID but I do not know why there's no LSI cards in lspci output !!
To manage the disks; I have to use the LSI Sata Megaraid fireware; so is there
any hope to install Centos 7 on this H/W?
I have three servers from this model and I was planning to use them as test
environment for me.
It's fakeRAID but I do not know why there's no LSI cards in lspci output !!
To manage the disks; I have to use the LSI Sata Megaraid fireware; so is there
any hope to install Centos 7 on this H/W?
I have three servers from this model and I was planning to use them as test
environment for me.
This is the strange thing because when I configured the vDisks; I logged to LSI
SATA MEGARAID firmware.
I got the output of lspci -nn using systemrescuecd version 4.6.1 from
https://www.system-rescue-cd.org/
Please; advise
___
CentOS mailing list
# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 22)
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 22)
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Dear All;
I want to install Centos 7 latest build on NEC Server 5800/120b-2.
The installation wizard fails to detect the storage connected to LSI SATA
MegaRaid PCI.
Centos 5/6 were working fine with this H/W configuration but not the case with
Centos 7.
Please; advise.
Fawzy Ibrahim
I have successfully installed Squid 3 on Centos 5.7; and after I follow the
guide:-
https://dvas0004.wordpress.com/2011/03/22/squid-transparent-ssl-interception/.
Now I have the following two lines in my squid.conf:-
http_port Internal_IP:8080 transparent
https_port Internal_IP:3128 ssl-bump
I have Centos 5.7 AMD64; is there a way to have Squid 3 with SSLBump feature in
Centos 5.7? I appreciate any help on that?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Yes; it was an issue with Linux kernel 2.6.18-274.*.el5.centos.plus ; so I
switched back to Linux kernel 2.6.18-238.19.1.el5.centos.plus and it's working
now.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
I have Centos 5.7 64bit; I have installed vsftpd as standalone service and
using it for two years now with no problem. Suddenly; only it works with active
mode. The passive mode stops working and gives time out. Firewall is disabled
and SELinux is set to permissive.
I ran tcpdump and I noticed
14 matches
Mail list logo