On Sat, Apr 10, 2021 at 12:13 PM Nicolas Kovacs wrote:
> I'd be curious to have your input, since I'm fairly new to this sort of
> approach.
>
This is the whole pets VS cattle choice.
IMO each VM should have a singular use/purpose/app. VMs are effectively
free. And also prevents unintended
On Wed, Mar 17, 2021 at 2:15 PM R C wrote:
> Hello,
>
>
> I installed 72G ram in a Dell (it canhandle 72G according to Dell). The
> BIOS says there are 9 8G DIMMs install (BIOS test shows no errors).
> dmidecode says there are indeed 9 DIMMs, and they show all fine, no
> errors etc. However,
On Thu, Jan 21, 2021 at 6:34 PM lejeczek via CentOS
wrote:
> Hi guys.
>
> Hoping some net experts my stumble upon this message, I have
> an IPoIB direct host to host connection and:
>
> -> $ ethtool ib1
> Settings for ib1:
> Supported ports: [ ]
> Supported link modes: Not reported
On Tue, Jun 9, 2020 at 12:10 AM Peter wrote:
> On 9/06/20 2:56 pm, Jon LaBadie wrote:
>
> Don't use a backup MX, they are a relic of the 90s when mail servers
> were often times not always online. a sending mail server will
> generally retry the message for up to five days if your MTA is down
On Thu, May 21, 2020 at 8:31 AM Xinhuan Zheng
wrote:
> can I detach external array from old hardware, and attach it to new
> hardware, then re-configure LVM, so new operating system can recognize the
> external array file system?
If only there existed a documentation project, for Linux which
On Thu, Jan 23, 2020 at 8:54 AM Ger van Dijck
wrote:
> But when trying to do a fresh install or a netinstall (both Centos 7) I
> get the following message :
>
> [ 0.123604] ACPI:SCI(ACPI GSI 9) not registered
> [28.595238] systemd[1] Caught , dump core as pid 75
> [28.595814] systemd[1] :
On Thu, Jul 4, 2019 at 2:43 AM Jobst Schmalenbach
wrote:
> the development and life server in question run the same software setup:
> - CentOS Linux release 7.6.1810
> - bind 32:9.9.4-74.el7_6.1
> - Apache/2.4.6 (CentOS)
> - PHP 7.1.29
> - mysqld Ver 5.7.26
> - wordpress,
On Mon, Jul 1, 2019 at 4:37 PM Jonathan Billings
wrote:
> I never was able to find a bootable FreeDOS image that could run it from a
> USB boot disk.
https://lists.centos.org/pipermail/centos/2013-May/134512.html
___
CentOS mailing list
On Wed, May 22, 2019 at 10:22 AM mark wrote:
> It seems unlikely. It's a 4U server, with 36 disks (and the dual root
> disks), in a machine room, and ipmitool sel list shows nada, nor are there
> any warnings, as I've seen on other systems occasionally, that the CPU is
> overheating, and is
On Sat, Apr 27, 2019 at 11:44 PM wuzhouhui
wrote:
> I have a small question about NIC driver (e.g. i40e) loading. Who is
> responsible to load i40e driver? And how does he knows we should load
> i40e, instead of ixgbe?
`depmod` may put hardware/driver lists into initramfs when `mkinitrd` is
On Thu, Apr 25, 2019 at 8:46 PM Chris Adams wrote:
> Once upon a time, Steven Tardy said:
> > The “ICMP unreachable” should be a dead giveaway. . .
>
> You cut out the part of the email where the OP said that the UEFI system
> was ignoring the next-server part of the DHC
On Thu, Apr 25, 2019 at 5:25 AM isdtor wrote:
> 09:02:02.911381 IP client.cisco-ipsla > dhcp-server.tftp: 56 RRQ
> "linux-install/bootx64.efi" octet tsize 0 blksize 32768
> 09:02:02.911403 IP dhcp-server > client: ICMP dhcp-server udp port tftp
> unreachable, length 92
>
The “ICMP unreachable”
On Fri, Apr 19, 2019 at 8:51 PM Kaushal Shriyan
wrote:
> Does devtmpfs and tmpfs use underlying hard disk storage or does it uses
> Physical Memory (RAM). What is the purpose of devtmpfs which is mounted on
> /dev, tmpfs mounted on /dev/shm and so on and so forth. What is the
> difference
Try to check the “dynamic update” checkbox in the AD DHCP confit like the
5th image on this blog:
https://blog.royso.me/integrate-linux-desktop-to-microsoft-active-directory-and-dns-c86554bcf123
___
CentOS mailing list
CentOS@centos.org
On Thu, Dec 20, 2018 at 8:12 AM lejeczek via CentOS
wrote:
> any Centosian here have done something different than only
> contemplated using Fedora Server, actually worked on it in
> test/production envs.
>
> If here are some folks who have done it I want to ask if you deem it to
> be a viable
> after the ssl handshake, the client side reset the tcp connection.
Client doesn’t like TLS cypher list.
Client doesn’t have intermediate certificate.
Server needs intermediate certificate configured.
Client needs remote certificate “installed”.
Many more TLS issues.
>
> Am 04.12.2018 um 21:30 schrieb Günther J. Niederwimmer:
> > Hello,
> > is this only my mistake,or can help any from the list?
> >
> > I have 3 host computer on different places, but all have the Problem when
> > starting a client "KVM" to connect to the bridge from the host.
> >
> > It is near
On Tue, Nov 20, 2018 at 7:40 AM lejeczek via CentOS
wrote:
> hi guys
>
> I have a box on which UEFI boot has gone haywire and instead
> of boot it power the box down, that is before even going to
> grub2. (displays some error message)
> I if change to BIOS boot then I can start Centos' rescue -
On Wed, Oct 17, 2018 at 3:55 PM mark wrote:
>Freshly built box... but does not get its IPv6 address.
Is network properly giving out IPv6 Router Advertisements (RAs)?
What flags (M and/or O) are being given out?
>
___
CentOS mailing list
On Wed, Sep 26, 2018 at 2:17 PM lejeczek via CentOS
wrote:
> hi guys
>
> I have rather a large set of Seagate's SAS ST32000444SS, over a hundred
> - experience I'm having from those in conjunction with their tech
> support is abysmal.
>
> I'm trying to update firmware of these drives and nothing
On Tue, Apr 24, 2018 at 1:27 PM Jerry Geis wrote:
> What is the correct way to provide a CentOS 7 - WMware image for ESX ?
You are probably looking for VMware Converter which can p2v or v2v.
IMO: if you are creating a VM image which is a binary blob or image then
you are
Early in this thread you mentioned these are on different network subnets.
. .
Just thought about a similar issue. . .
sysctl -a | grep rp_filter
If a packet comes in to Linux and the path BACK to the remote IP is NOT out
that same interface (asymmetric routing) the Linux kernel will drop the
On Thu, Apr 12, 2018 at 5:00 PM marcos sr wrote:
> I have a CentOS VM with a lots of inodes, and 500GB +/-, running under
> hyper-v . Which is best for backup them? What is the pros and cons?
Not enough details.
Are you backing up the VM from hyper-v?
Are you backing up
Reading back through prior emails. . . TFTP client requests packets *are*
making it to the TFTP server. So it seems like something on the TFTP server
itself.
Like previously mentioned server side
firewall/iptables/tcp-wrappers/selinux are all possible culprits.
Hmmm just thought of something
A STATEFUL firewall with “ip any any” can and will still block asymmetric
communications due to the firewall keeping track of state (hence tha name
stateful firewall).
Tcpdump on your servers /other/ NICs and you’ll see the tftp traffic
leaving your server on some other NIC (probably on with the
On Wed, Mar 28, 2018 at 3:16 PM Asif Iqbal wrote:
> It is not respoding to A server which is sending the tftp read request RRQ.
>
> I do see the RRQ packets coming from A to S, but S never responds back from
> a different port Y to A
>
> So this part is working fine
>
>
>
>
On Wed, Mar 7, 2018 at 11:57 AM hw wrote:
> Apparently Cisco can do it:
>
>
> https://www.cisco.com/c/en/us/products/collateral/wireless/wireless-location-appliance/product_data_sheet0900aecd80293728.html
I was going to mention Cisco WCS which uses wireless “controllers” and
On Sun, Feb 25, 2018 at 8:29 PM wuzhouhui
wrote:
> I know dracut can update modules in initramfs, but I think it is too
> slow. So I'm wondering what is the fastest way to update modules in
> initramfs of CentOS 7?
`dracut` calls `mkinitrd` which rebuilds the
00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port
SATA AHCI Controller (rev 06)
While I don’t have experience with this exact controller, I have seen some
LSI controllers get removed from RHEL post GA which causes similar issues.
“It worked when I installed, but after `yum
On Mon, Feb 19, 2018 at 7:01 AM Sorin Srbu wrote:
> Hi all,
>
> This is the third fresh install of CentOS 7 1708 the last two months that
> won't boot after a regular "yum update" just after the fresh install has
> finished.
Not nearly enough details given. . .
What disk
On Tue, Nov 28, 2017 at 8:06 AM Joseph L. Casale
wrote:
> On the other hand I see the
> opposite with RHEL where admins constrain installations to the
> point release.
This is most commonly due to 3rd party support stipulations (I’m looking at
you Oracle/SAP) who
> On Oct 27, 2017, at 11:39 AM, marcos valentine wrote:
>
> percent of free memory is indicated to operate?
Free memory as in unused or free memory as in available (unused + disk buffers)?
Google: Linux ate my RAM
Output of `free` from your system may provide some
> On Oct 17, 2017, at 5:07 PM, FHDATA wrote:
>
> can not establish a network connectivity
> for some time: 7 to 15 minutes and then
> everything network wise is fine...
Over 5 minutes makes it sound like a ARP time-out somewhere(default gateway).
Does ifconfig show the
> On Oct 10, 2017, at 5:39 AM, Toralf Lund wrote:
>
> If this unit (a small USB thingummy) is connected when I try to boot the
> system, it locks up completely.
I’ve seen USB power draw be an issue similar to this previously. Does the same
problem occur if connected
> On Sep 25, 2017, at 2:56 AM, Thomas Plant wrote:
>
> OOM situation
Do you have `sar` installed and activated?
Does sar output show high memory leading up to the outage?
___
CentOS mailing list
CentOS@centos.org
> On Sep 10, 2017, at 11:33 AM, J Martin Rushton
> wrote:
>
> #mcastport: 5405
Does tcpdump see this traffic leaving each VM?
Yes then the app is working.
Does tcpdump see this traffic making it to each VM?
Yes then the switching is working.
Is the port
> On Sep 9, 2017, at 12:47 PM, hw wrote:
>
> Isn´t it easier for SSDs to write small chunks of data at a time?
SSDs read/write in large-ish (256k-4M) blocks/pages. Seems to me that drive
blocks and hardware RAID strip size and file system block/cluster/extents sizes
and etc
> On Aug 12, 2017, at 3:50 PM, Fred Smith wrote:
>
> I had a series of kernel hardware error reports today while I was away
> from my computer:
>
> Message from syslogd@fcshome at Aug 12 10:12:24 ...
> kernel:[Hardware Error]: MC2 Error: VB Data ECC or parity
> On May 30, 2017, at 3:26 AM, Walter H. wrote:
>
> is there a way to influence the order?
Not sure what your use of multiple IPs is. . . but I'd probably use an
interface alias instead of secondary.
> On May 1, 2017, at 8:49 PM, H wrote:
>
> the computer locks up at random intervals
Anything in /var/log/mcelog?
Is the "edac" module running?
Does that model support bundle include any Intel MCA files?
___
CentOS mailing list
> On Apr 29, 2017, at 9:50 AM, Gregory P. Ennis wrote:
>
> find a way to make the installation disc of Centos 6 identify the SCSI
> drives.
What model LSI card?
Is that card on the RHEL hardware support list?
Does LSI/Dell have drivers on their site?
Have you tried drivers
> On Apr 26, 2017, at 2:58 AM, Nicolas Kovacs wrote:
>
> The site is rated "C"
The RHEL/CentOS out-of-the-box apache tls is a little old but operational. This
Mozilla resource is excellent for getting apache tls config up-to-date.
> On Apr 4, 2017, at 9:22 PM, Jerry Geis wrote:
>
> sending information to another system
What does this mean? Syslog?
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
> On Mar 24, 2017, at 1:20 AM, Digimer wrote:
>
> STRING: 0:c0:b7:5f:8a:85
I'd guess this is the raw string transported over the wire. The MIB likely
translates to proper MAC formatting. `tcpdump' should uncover this.
___
CentOS
> On Jan 10, 2017, at 4:17 PM, Itschak Mugzach wrote:
>
> after reviewing TCPDUMP
Did you `tcpdump` with the -nn option? If not than tcpdump was probably doing
the reverse DNS lookup.
___
CentOS mailing list
CentOS@centos.org
> On Jan 3, 2017, at 2:59 PM, lakhera2017 wrote:
>
> |- 1:0:0:15 sdq 65:0 failed ready running
> - 3:0:0:15 sdai 66:32 failed ready running
Does the same SAN target fail each time?
What brand/model/firmware SAN switch is between initiator and target?
Does the HBA
> On Nov 4, 2016, at 11:08 PM, Gordon Messmer wrote:
>
> LSI Logic / Symbios Logic SAS3008
What firmware is/are on the cards?
The driver version difference between C6 and C7 could interact badly with old
firmware.
What firmware does $vendor suggest?
Does C7 in BIOS
> On Oct 30, 2016, at 7:31 PM, Paul R. Ganci wrote:
>
> Now the question is how did this happen.
I've seen something similar when installing a kernel if /etc/fstab didn't match
df. Mkinitrd bombs out leaving the system unbootable. The rescue .iso/mkinitrd
path you followed
> On Oct 30, 2016, at 3:27 AM, Paul R. Ganci wrote:
>
> grub> set root=(hd0,msdos2)
> grub> linux (hd0,1)/vmlinuz-3.10.0-327.36.2.el7.x86_64 root=(hd0,msdos2)/
> grub> initrd initrd-plymouth.img
> grub> boot
Try the initrd matching the kernel?
> On Oct 12, 2016, at 12:26 AM, John R Pierce wrote:
>
> the switch ports kept going offline on us.
Not finding anything exactly like this... Closest I could find is CSCuu81949
Open a Cisco TAC case and upload a Nexus 9000 tech support (`tac-pac`) to
investigate further.
> On Sep 6, 2016, at 6:18 AM, Rafał Radecki wrote:
>
> # sudo -H -E -u postgres /bin/bash -c /usr/bin/python2.7
Works for me. *shrug*
Is your postgres user a service account or something else strange about it?
Does 'passwd --status postgres' hint at anything?
> On Sep 3, 2016, at 9:22 AM, Alice Wonder wrote:
>
> Where do I go from here to mount that volume?
vgdisplay to find the UUID, vgrename takes UUID as a source.
___
CentOS mailing list
CentOS@centos.org
> On Aug 25, 2016, at 1:43 PM, Chris Adams wrote:
>
> named-sdb (pulling domain
> records from MySQL), which is segfaulting randomly
named-sdb used to be(~7+ years ago) single threaded only and would crash if
threads were enabled. Did you change named to NOT thread? Does
> On Aug 14, 2016, at 6:20 AM, Anand Buddhdev wrote:
>
> Any ideas why tcpdump loses so many packets?
Saw your nanog posts...
How many RX queues are configured? What does 'ethtool -S p1p1' show? Any
discarded packets in the RX queue(s)?
> On Jun 20, 2016, at 5:15 AM, Ulrich Leodolter
> wrote:
>
> has anyone an idea why iSCSI read performance degraded in CentOS 7.2 ?
I'm not sure about those versions of centos, but iSCSI throughput being TCP is
dependent on TCP receive window and packet loss.
Run: nmtui
> On Jan 29, 2016, at 11:42 AM, "reynie...@gmail.com"
> wrote:
>
> Should I install any other package
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
> On Dec 17, 2015, at 11:58 PM, Earl A Ramirez wrote:
> I get
> the following error:
>
> [ 0.00] tsc: Fast TSC calibration failed
TSC is a high accuracy CPU clock. TSC can fail due to motherboard hardware
fault on multi processor servers. But the kernel usually
> On Nov 26, 2015, at 10:43 AM, Alice Wonder wrote:
>
> Is this sane ?
No. Use VLANs instead of physical cables and physical switches.
https://en.m.wikipedia.org/wiki/VLAN
___
CentOS mailing list
CentOS@centos.org
> On Nov 26, 2015, at 3:51 PM, Alice Wonder wrote:
>
> How do they deal with guaranteeing there is not IP address and MAC address
> spoofing?
VLANs simply provide the same thing you are doing in the physical world
(creating distinct broadcast domains), but does so
> On Nov 9, 2015, at 11:34 AM, Steve Clark wrote:
>
> IP 10.79.4.53.64327 > 10.79.2.53.24294: Flags [.], seq 16060:29200, ack 1,
> win 32767, length 13140
Do you have RSS enabled? With RSS the software/tcpdump sees larger "packets"
but the physical NIC chunks down to
> On Oct 10, 2015, at 9:34 AM, Imre Gergely wrote:
> _netdev
> The filesystem resides on a device that requires network
> access (used to prevent the system from attempting to mount these
> filesystems until the network has been enabled on the system).
_netdev in
> On Sep 25, 2015, at 12:33 PM, Timothy Murphy wrote:
>
> when I try to access localhost/Menloe
Try:
http://localhost/~Menloe
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Jul 7, 2015, at 12:42 AM, Meikel mei...@fn.de wrote:
It's a D-Link DGS-1210-16 Switch.
http://www.dlink.com/-/media/Business_Products/DGS/DGS%201210%2048/Manual/DGS_1210_Series_Manual_v4_00_EN.pdf
What are the current settings on the switch for:
Loopback Detection page 35
STP Global
Jul 5 16:36:08 meikel-pc kernel: ADDRCONF(NETDEV_UP): eth0: link is not
ready
Jul 5 16:36:23 meikel-pc kernel: ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
It takes 15 seconds between the two messages until it becomes ready. I
have no idea why it first says that the link is not
$NICVendor.
What IO throughput does the local file system give?
Test with hdparm / dd / iometer / sqlio / cp -a /path /dev/null
Test sever to server with iperf as others suggested.
Hope that points you in the right direction.
Steven Tardy
___
CentOS
I have an NFS storage system and want to run jpegoptim on several GB's
of jpeg images and I'm wondering what the best approach is.
Is it ok to run this operation on the Server itself while the clients
have it mounted or will this lead to problems like e.g. the dreaded
stale filehandle?
On Mar 31, 2015, at 2:06 PM, Les Mikesell lesmikes...@gmail.com wrote:
outlook will remove line breaks.
Is there something you can do to make a plain text list show up
correctly short of converting it to html with br's?
Prefix every line in the list with a space like:
space thing1
mysql grant all privileges on ftp.* to 'proftpd'@'localhost' identified by
'testpattern';
Query OK, 0 rows affected (0.35 sec)
mysql FLUSH PRIVILEGES;
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Thu, Mar 26, 2015 at 5:27 PM, Peter Brady subscripti...@simonplace.net
wrote:
FWITW the switches I've lost contact with are Netgear Layer 2 and 3
managed switches, not that brand should make a difference. Some other
Netgear WAPs are fine and all CISCO devices are fine. With a machine on
On Thu, Feb 26, 2015 at 9:18 AM, Laurent Wandrebeck
l.wandreb...@quelquesmots.fr wrote:
Hi there,
I’m working on deploying our new cluster.
Masters have 5×1gbps (i210 and i350, thus using igb.ko), configured with
mtu 9000, 802.3ad. Works fine *but* I can’t get DCB working (pause frame,
aka
On Feb 23, 2015, at 6:34 PM, Ashley M. Kirchner ash...@pcraft.com wrote:
I have a Dell server that has two built-in ethernet devices. When I
kickstart the machine, they are correctly identified as eth0 and eth1
(correctly meaning they correspond to the physical device ports 1 and 2). I
On Thu, Feb 19, 2015 at 12:27 PM, Tim Dunphy bluethu...@gmail.com wrote:
And I want to correlate that to the output of fdisk -l, so that I can feed
the disk partition I want to iostat, how would I go about that?
lsblk
___
CentOS mailing list
On Jan 15, 2015, at 8:24 PM, Tim Dunphy bluethu...@gmail.com wrote:
CassandraDB and Hadoop.
Some VPSs (virtuozzo/openvz) have problems with some workloads (java/tomcat)
but not other workloads (mysql/apache). I'm not sure how cassandradb/hadoop
would run on some of those cheap VPS
On Thu, Dec 11, 2014 at 12:35 PM, Warren Young w...@etr-usa.com wrote:
We noticed this problem when web browsers would refuse to connect to the
server. *Then* we discovered the netstat oddity, and *then* we found that
changing the Listen line in httpd.conf fixed it.
That leaves me still
On Sat, Sep 6, 2014 at 9:34 AM, Valeri Galtsev galt...@kicp.uchicago.edu
wrote:
I was always fascinated: why [some] people are dying to upgrade firmware?
It doesn't matter whether by firmware you mean system board BIOS, or
firmware of some card. Why taking chance having your machine hosed?
On Thu, Aug 21, 2014 at 3:43 PM, Matt matt.mailingli...@gmail.com wrote:
I have CentOS 6.x installed on a HP ProLiant DL380 G5 server. It
has eight 750GB drives in a hardware RAID6 array. Its acting as a
host for a number of OpenVZ containers.
Seems like every time I reboot this server
On Wed, Aug 6, 2014 at 2:44 PM, Chuck Campbell campb...@accelinc.com
wrote:
I have a raid 50 array on a 3ware controller. The box is running centos
6.5 and
the file system is ext4.
I'm going to try some other filesystems, but could anyone suggest any
alternative raid setups as well as
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s1-networkscripts-interfaces.html
See: PEERDNS
(Not sure this still applies in 7)
On Jul 11, 2014, at 4:41 AM, Mauricio Tavares raubvo...@gmail.com wrote:
Ok, we can take both but needs to be in a
10.10.160 != 10.10.1.160
the GET is probably going across ethx interface instead of lo interface.
On Mon, Jun 9, 2014 at 9:56 PM, Tim Dunphy bluethu...@gmail.com wrote:
Hey all,
I'm having a slightly weird issue with apache server-status on just one of
my nodes.
In my httpd.conf I have
h1Forbidden/h1
pYou don't have permission to access /server-status
on this server./p
hr
addressApache Server at 10.10.1.160 Port 80/address
/body/html
Any further thoughts?
Thanks
On Mon, Jun 9, 2014 at 10:23 PM, Steven Tardy sjt5a...@gmail.com wrote:
10.10.160 != 10.10.1.160
the GET
[user@server ~]# find /proc -name max_user_instances
/proc/sys/fs/inotify/max_user_instances
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Thu, Apr 17, 2014 at 4:04 PM, Dan Hyatt dhy...@dsgmail.wustl.edu wrote:
I have an intermittent problem with my Dell blades, out of 80 blades 69
of them kickstarted Centos 6 fine using PXE
The other 11, I get a c0t0 not found error (indicating it is not
finding the local disk on the
http://svn.fedorahosted.org/svn/logrotate/tags/r3-8-5/logrotate.8
shows hourly as a .conf option was added to 3.8.5...
current centos 6 version is logrotate-3.7.8-17.el6.x86_64
centos6$ man logrotate:
dateformat format_string
Specify the extension for dateext using the
On Tue, Apr 8, 2014 at 2:56 AM, Keith Keller
kkel...@wombat.san-francisco.ca.us wrote:
On 2014-04-08, Karanbir Singh kbsi...@centos.org wrote:
Earlier in the day today, we were made aware of a serious
issue in openssl as shipped in CentOS-6.5 ( including updates issued
since CentOS-6.5
iptables rules and after some number of rules iptables
wouldn't take any more. Tcp wrappers scaled much much higher using less RAM.
Political reasons shouldn't prevent removing tcp wrappers, but some technical
reasons still exist.
Steven Tardy
rescan-scsi-bus.sh?
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/5/html/Online_Storage_Reconfiguration_Guide/rescan-scsi-bus.html
On Mar 12, 2014, at 7:24 PM, James Pifer j...@obrien-pifer.com wrote:
Looking for help kind of in a hurry. I've been searching
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html-single/Storage_Administration_Guide/#rhel6storage-whatsnew
fs-cache is a tech preview(Zero support from redhat).
Tried cachefs on a few servers(don't remember if it was rhel 6.1 or 6.2 at the
time), had problems
On Wed, Feb 26, 2014 at 6:57 AM, C. L. Martinez carlopm...@gmail.comwrote:
if [ $cpu_affinity == $cpu_affinity_ok ]; then
are you comparing strings or integers?
# man test
STRING1 = STRING2
the strings are equal
INTEGER1 -eq INTEGER2
INTEGER1 is
Something on that subnet will need to know how to accept and forward the packet
to the correct destination: the router/gw will still have to have a route added.
On Feb 26, 2014, at 9:24 AM, Steve Clark scl...@netwolves.com wrote:
Actually you can by adding a route via the interface
ip r a
On Thu, Feb 6, 2014 at 11:54 AM, Joseph Hesse joehe...@gmail.com wrote:
== httpd.conf ==
ServerName 192.168.0.99
NameVirtualHost *:80
VirtualHost *:80
ServerName IDoNotExist.com
DocumentRoot /var/www/html
DirectoryIndex Index.html index.html
/VirtualHost
On Sat, Jan 25, 2014 at 7:33 AM, Joseph Hesse joehe...@gmail.com wrote:
I am running a Lamp server on a CentOS 6.5 box. It works fine, I am
concerned that I may have the wrong file/dir permissions.
The directories /var and /var/www are root:root and 755.
For /var/www/html and all
~1A/
* reboot *
steven tardy
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 02/14/2013 04:00 PM, Robert Moskowitz wrote:
In /etc/sysconfig/named that gets installed along with bind-chroot there
is a comment that basically says:
Don't forget to add $AddUnixListenSocket /var/named/chroot/dev/log
line to your /etc/rsyslog.conf file.
All these little touches you
is any email program running?
run:
netstat -pant|grep :25|grep LISTEN
to see if any program is listening... output should look like:
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 21493/sendmail
guess it'll say 'postfix' or 'master' instead of 'sendmail' on RH6.
On 06/13/2012 12:18 PM, m.r...@5-cent.us wrote:
CentOS 6.2. I have a 2TB drive, one partition, which is used for online
backups. It filled up the other day. I moved a couple of b/u directories
off it, and deleted the originals, which should have given me 42G free. I
also reduced the reserved
simple-evcorr.sourceforge.net (sec.pl)
the rules are a bit of a bear to learn, but it can do anything.
300 syslogs/second using ~5% cpu and 20MB of ram with 600+ rules.
On 06/08/2012 04:26 PM, Nataraj wrote:
I'm looking for a logfile scanner that can search for regular
expressions in logfiles
On 06/05/2012 06:03 AM, Philippe Naudin wrote:
Can someone point me to some useful doc ?
google:
site:docs.redhat.com install gnome
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 06/05/2012 09:30 AM, James B. Byrne wrote:
In dealing with an unrelated issue I came across this in rsyslog.conf.
mail.* -/var/log/maillog
Why is there a - before /var/log/maillog?
man syslog.conf
You may prefix each entry with the minus
On 05/21/2012 10:57 AM, Shiv. NK wrote:
bind cannot load zone files, i see the following in the log for all domains.
i have tried with 777 to all zone files but does not make difference. main
directories are also owned by named:named
May 21 15:45:23 nsfo1 named-sdb[2482]: zone
On 05/22/2012 08:10 AM, Nikos Gatsis - Qbit wrote:
Hello list
I use sendmail-8.14.4-8.el6.x86_64 and I wonder how to restrict the
number of emails sendmail sent over an hour.
Is the define(`confMAX_QUEUE_RUN_SIZE', `200') command what I'm looking for?
Thank you in advance.
1 - 100 of 110 matches
Mail list logo