On Thu, Nov 5, 2015 at 8:23 AM, Tris Hoar wrote:
> On 04/11/2015 20:59, John R Pierce wrote:
>
>> On 11/4/2015 12:52 PM, Boris Epstein wrote:
>>
>>> I don't get this for some reason... not even sure why. ESXi's default
>>> behaviour seems to be to allow hotplug, that does not
On Fri, Nov 6, 2015 at 9:56 AM, Boris Epstein wrote:
>
>
> On Thu, Nov 5, 2015 at 8:23 AM, Tris Hoar wrote:
>
>> On 04/11/2015 20:59, John R Pierce wrote:
>>
>>> On 11/4/2015 12:52 PM, Boris Epstein wrote:
>>>
I don't get this for some reason... not
On 04/11/2015 20:59, John R Pierce wrote:
On 11/4/2015 12:52 PM, Boris Epstein wrote:
I don't get this for some reason... not even sure why. ESXi's default
behaviour seems to be to allow hotplug, that does not seem to be
deactivated. I am just not sure. Wonder if this could be the Centos 7
vs 6
On 11/4/2015 11:36 AM, Boris Epstein wrote:
Absolutely, I see your point. This was the starting point - you add the
device on the ESXi server, you reboot the VM, the VM sees the device, no
problem. Now, I ask - do I have to reboot the VM? Logically I hope there
ought to be a way for me not to
On 11/4/2015 12:52 PM, Boris Epstein wrote:
I don't get this for some reason... not even sure why. ESXi's default
behaviour seems to be to allow hotplug, that does not seem to be
deactivated. I am just not sure. Wonder if this could be the Centos 7 vs 6
- perhaps that is what I ought to test
>>
> vmware esxi 5.5.0 (free, using vsphere client to manage), vm is minimal
> centos 7 64bit. I added a 16gb vdisk and immediately see this in dmesg...
>
> [155484.386792] vmw_pvscsi: msg type: 0x0 - MSG RING: 1/0 (5)
> [155484.386796] vmw_pvscsi: msg: device added at scsi0:1:0
>
On Wed, Nov 4, 2015 at 1:57 PM, wrote:
> Boris Epstein wrote:
> >>
> >> My turn for a dumb question: from not paying a lot of attention to this
> >> thread, the answer isn't clear to me: has the *host* recognized the
> >> disk? If not, the guest's not going to see it.
> >
> >
Boris Epstein wrote:
>>
>> My turn for a dumb question: from not paying a lot of attention to this
>> thread, the answer isn't clear to me: has the *host* recognized the
>> disk? If not, the guest's not going to see it.
>
> IMO your question is not dumb at all. Unfortunately, I don't have an
>
Hi Boris,
Just rescan the scsi host.
#scsi-rescan #if you have sg3_utils package
#lsscsi
Or
#echo "- - -" > /sys/class/scsi_host/host[n]/scan
Julius
> On Nov 4, 2015, at 15:31, Boris Epstein wrote:
>
> Hello all,
>
> Is there a way to recognize a hot-plugged disk (i.e.,
Hello Julius,
Thanks - but it doesn't seem to work.
I installed sg3_utils and ran
#scsi-rescan
but that seemed to have done nothing for some reason.
Cheers,
Boris.
On Wed, Nov 4, 2015 at 10:12 AM, Tnjulius wrote:
> Hi Boris,
> Just rescan the scsi host.
> #scsi-rescan
Hello all,
Is there a way to recognize a hot-plugged disk (i.e., to get the system to
recognize it and build the appropriate /dev/sd* device for the new device)
without a reboot?
Thanks.
Boris.
___
CentOS mailing list
CentOS@centos.org
On 11/04/2015 10:27 AM, Mauricio Tavares wrote:
> On Wed, Nov 4, 2015 at 10:22 AM, Boris Epstein wrote:
>> Hello Julius,
>>
>> Thanks - but it doesn't seem to work.
>>
>> I installed sg3_utils and ran
>> #scsi-rescan
>>
>> but that seemed to have done nothing for some
On Wed, Nov 4, 2015 at 11:03 AM, Jonathan Billings
wrote:
> On Wed, Nov 04, 2015 at 05:39:59PM +0200, Eero Volotinen wrote:
> > I think, this is possible with scsi disks
> >
> >
> http://www.cyberciti.biz/tips/vmware-add-a-new-hard-disk-without-rebooting-guest.html
>
> While
On Wed, Nov 4, 2015 at 10:22 AM, Boris Epstein wrote:
> Hello Julius,
>
> Thanks - but it doesn't seem to work.
>
> I installed sg3_utils and ran
> #scsi-rescan
>
> but that seemed to have done nothing for some reason.
>
Dumb question: did dmesg even bother to notice
Hi,
I think, this is possible with scsi disks
http://www.cyberciti.biz/tips/vmware-add-a-new-hard-disk-without-rebooting-guest.html
Eero
4.11.2015 4.32 ip. "Boris Epstein" kirjoitti:
> Hello all,
>
> Is there a way to recognize a hot-plugged disk (i.e., to get the system
>
>
>
> was the controller you added the virtual disk to an IDE or scsi controller?
>
> --
> public gpg key id: 1362BA1A
>
> ___
> CentOS mailing list
> CentOS@centos.org
> https://lists.centos.org/mailman/listinfo/centos
>
It was a SCSI controller.
On 11/04/2015 11:05 AM, Boris Epstein wrote:
> On Wed, Nov 4, 2015 at 11:03 AM, Jonathan Billings
> wrote:
>
>> On Wed, Nov 04, 2015 at 05:39:59PM +0200, Eero Volotinen wrote:
>>> I think, this is possible with scsi disks
>>>
>>>
>>
On Wed, Nov 4, 2015 at 11:29 AM, Eero Volotinen
wrote:
> It should work fine. What esxi version you are using?
>
> Eero
> 4.11.2015 6.27 ip. "Boris Epstein" kirjoitti:
>
>
Eero,
I know. It is EXSi 5.5
Thanks.
Boris.
Zep,
Thanks - nothing insulting about asking questions.
I did run this command as root as I would never run stuff like this as any
other user (or, perhaps, I'd use sudo if so forced).
dmesg did not seem to detect the device addition, no.
Cheers,
Boris.
On Wed, Nov 4, 2015 at 10:32 AM, zep
On Wed, Nov 04, 2015 at 05:39:59PM +0200, Eero Volotinen wrote:
> I think, this is possible with scsi disks
>
> http://www.cyberciti.biz/tips/vmware-add-a-new-hard-disk-without-rebooting-guest.html
While I believe that this URL has technically correct advice, it's
basically doing a subset of the
It should work fine. What esxi version you are using?
Eero
4.11.2015 6.27 ip. "Boris Epstein" kirjoitti:
> >
> >
> >
> > was the controller you added the virtual disk to an IDE or scsi
> controller?
> >
> > --
> > public gpg key id: 1362BA1A
> >
> >
@Boris:
If you have CentOS 6 + ESXi5.5, it should normally work fine.
Have you retry the operation by adding another vDisk? monitor
/var/log/messages
Julius
2015-11-04 17:34 GMT+01:00 Boris Epstein :
> On Wed, Nov 4, 2015 at 11:29 AM, Eero Volotinen
Am 04.11.2015 um 17:26 schrieb Boris Epstein:
It was a SCSI controller.
It usually works very nice here,
Have you added only the disk or by accident another scsi controller?
This happens (you probably know) if you select another bus while
creating the disc.
VG Rainer
>
>
> It usually works very nice here,
> Have you added only the disk or by accident another scsi controller?
> This happens (you probably know) if you select another bus while creating
> the disc.
>
> VG Rainer
>
> ___
> CentOS mailing list
>
Boris Epstein wrote:
> Hello Julius,
>
> Thanks - but it doesn't seem to work.
>
> I installed sg3_utils and ran
> #scsi-rescan
>
> but that seemed to have done nothing for some reason.
>
My turn for a dumb question: from not paying a lot of attention to this
thread, the answer isn't clear to me:
>
>
> My turn for a dumb question: from not paying a lot of attention to this
> thread, the answer isn't clear to me: has the *host* recognized the disk?
> If not, the guest's not going to see it.
>
> mark
>
>
>
> ___
> CentOS mailing list
>
26 matches
Mail list logo