yes,
when the computer reboots, i saw the tape drive as device detected. but i can
not use it when i log on
--- En date de : Ven 11.7.08, nate [EMAIL PROTECTED] a écrit :
De: nate [EMAIL PROTECTED]
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11 Juillet 2008, 7h51
Pitshou
Pitshou Asingalembi wrote:
yes,
when the computer reboots, i saw the tape drive as device detected. but i
can not use it when i log on
What kind of scsi controller exactly? send the output of 'dmesg'
as well.
nate
___
CentOS mailing list
the hp smart array 6400 controller.
--- En date de : Ven 11.7.08, nate [EMAIL PROTECTED] a écrit :
De: nate [EMAIL PROTECTED]
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11 Juillet 2008, 8h17
Pitshou Asingalembi wrote:
yes,
when the computer reboots, i saw the tape
Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
It's usually not a good idea to connect a tape drive to a
raid controller. The 6400 is made to be connected to something
like a MSA20/MSA30 (JBOD SCSI shelf)
Send the output of the command 'dmesg'.
But I think you need to get
Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
Using the cciss driver?
yum install kernel-doc
Read /usr/share/doc/kernel-doc-2.6.18/Documentation/cciss.txt
There's a section on how to enable the tape drive.
Mogens
--
Mogens Kjaer, Carlsberg A/S, Computer Department
Gamle
Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
thats a raid controller. are you sure it supports plain scsi devices
like tape?many raid controllers are disk only, and for things like
tape drives, you need a seperate plain scsi port.
nate schrieb:
Pitshou Asingalembi wrote:
the hp smart array 6400 controller.
It's usually not a good idea to connect a tape drive to a
raid controller.
Exactly.
Buy a dedicated SCSI-card for that.
Tapes sometimes produce interesting events on the SCSI-bus (you might
have got to
Pitshou Asingalembi wrote:
hi all,
i want to use a compaq sdlt 320 under centos. the tape drive was already
installed and after rebooting i was not able to see it(dmesg | grep tape or
dmesg | grep scsi). i add the correct module (modprobe st) but i'm not able
to use with mt. the st0 file is
cat /proc/scsi/scsi gave me only the HDD, the st module was loaded by typing
modprobe st but i don't have the st file under /dev.
--- En date de : Ven 11.7.08, nate [EMAIL PROTECTED] a écrit :
De: nate [EMAIL PROTECTED]
Objet: Re: [CentOS] tape drive
À: centos@centos.org
Date: Vendredi 11
Pitshou Asingalembi wrote:
cat /proc/scsi/scsi gave me only the HDD, the st module was loaded by typing
modprobe st but i don't have the st file under /dev.
Doesn't matter if the st module is loaded or not. If it's a SCSI
tape drive, and if it's connected to your SCSI controller, and if
the
10 matches
Mail list logo