hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user may
reach to thousands user from several hundreds virtual domains.
what i concern is large numbers of linux system user which used in
these setup, is it good
On Sat, Nov 6, 2010 at 23:19, Bob McConnell rmcco...@lightlink.com wrote:
To amplify this just a little bit, by the rules of IP routing, every
machine must:
A) Have a unique address.
B) Be attached to the proper subnet for that address as defined by the
local netmask.
Once those are true,
On 8 November 2010 09:34, Dotan Cohen dotanco...@gmail.com wrote:
Both those conditions are met in this use case, however the machine in
question is on two networks:
|--Network1--|--Network2--|
A C B
A: router on the wireless network
B: router on the wired network
C:
From: Dotan Cohen dotanco...@gmail.com
This is on the Internet-connected interface:
wlan0 Link encap:Ethernet HWaddr 00:18:de:98:c7:34
inet addr:192.168.0.26 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::218:deff:fe98:c734/64 Scope:Link
UP
On 08/11/10 08:30, ahmad riza h nst wrote:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user may
reach to thousands user from several hundreds virtual domains.
what i concern is large numbers of linux
Dotan Cohen wrote:
On Sat, Nov 6, 2010 at 23:19, Bob McConnell rmcco...@lightlink.com wrote:
To amplify this just a little bit, by the rules of IP routing, every
machine must:
A) Have a unique address.
B) Be attached to the proper subnet for that address as defined by the
local netmask.
On 8/11/10 7:30 PM, ahmad riza h nst wrote:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user
may reach to thousands user from several hundreds virtual domains.
That shouldn't be a problem. Postfix has
On Mon, Nov 8, 2010 at 6:42 PM, Ben McGinnes b...@adversary.org wrote:
On 8/11/10 7:30 PM, ahmad riza h nst wrote:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user
may reach to thousands user from
centos-boun...@centos.org wrote on 08.11.2010 13:54:15:
ahmad riza h nst rizah...@gmail.com
Gesendet von: centos-boun...@centos.org
08.11.2010 13:54
Bitte antworten an
CentOS mailing list centos@centos.org
An
CentOS mailing list centos@centos.org
Kopie
Thema
Re: [CentOS]
Greg Bailey wrote:
Rob Kampen wrote:
Hi List.
doing my weekly updates with yum last night installed
kernel.x86_64 2.6.18-194.17.4.el5.centos.plus
and
flash-plugin.i386 10.1.102.64-release
now today as I go to watch a movie from hulu.com it crashes the
flash-plugin whenever I try to go
On Mon, 08 Nov 2010 08:08:42 -0500
Rob Kampen rkam...@kampensonline.com wrote:
kernel.x86_64 2.6.18-194.17.4.el5.centos.plus
(...)
I noticed in the announcement at:
https://www.redhat.com/archives/rhsa-announce/2010-November/msg4.html
(...)
thanks Greg - I moved to an earlier version -
On Nov 8, 2010, at 8:35 AM, Przemysław Pawełczyk pp...@o2.pl wrote:
On Mon, 08 Nov 2010 08:08:42 -0500
Rob Kampen rkam...@kampensonline.com wrote:
kernel.x86_64 2.6.18-194.17.4.el5.centos.plus
(...)
I noticed in the announcement at:
On Mon, 8 Nov 2010 08:55:30 -0500
Rob Kampen rkam...@kampensonline.com wrote:
On Nov 8, 2010, at 8:35 AM, Przemysław Pawełczyk pp...@o2.pl wrote:
On Mon, 08 Nov 2010 08:08:42 -0500
Rob Kampen rkam...@kampensonline.com wrote:
kernel.x86_64 2.6.18-194.17.4.el5.centos.plus
(...)
Dne 17.9.2010 22:16, Tom Bishop napsal(a):
Benn playing with the beta's and have looked around for a potential release
date...Does anyone know what the likely date is??? Thanks
David Hrbáč wrote:
Dne 17.9.2010 22:16, Tom Bishop napsal(a):
Benn playing with the beta's and have looked around for a potential release
date...Does anyone know what the likely date is??? Thanks
On Nov 6, 2010, at 9:04 AM, Dotan Cohen dotanco...@gmail.com wrote:
On a CentOS 5.5 laptop (Dell Inspiron, dual boot with a Debian-based
distro) I have a cable plugged into eth0 which is on a LAN with no
internet connection. Additionally, I connect wirelessly on wlan0 to
the internet. Both
On Mon, Nov 08, 2010 at 07:22:55AM -0700, Greg Bailey wrote:
Join the Red Hat executive team on November 10th, 2010 for a live video
webcast.
Register now.
If I was a betting person, I'd put my money on November 10... at least
the CentOS devs have a couple of days to get the FAQ set up
On 8/11/10 11:54 PM, ahmad riza h nst wrote:
the problem is we would use webmin + virtualmin as an interface for
costumers to manage their domain (mainly emails) on the server and
virtualmin don't use/support mysql + vpopmail yet, at least that
what i understand at this moment.
virtualmin
On Nov 8, 2010, at 2:30 AM, ahmad riza h nst wrote:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user may
reach to thousands user from several hundreds virtual domains.
what i concern is large numbers
On 11/8/2010 3:34 AM, Dotan Cohen wrote:
On Sat, Nov 6, 2010 at 23:19, Bob McConnellrmcco...@lightlink.com wrote:
To amplify this just a little bit, by the rules of IP routing, every
machine must:
A) Have a unique address.
B) Be attached to the proper subnet for that address as defined by
Not sure if this is normal or some kind of bug that I should be filing
somewhere so asking for opinions here first.
I have a new system (Gigabyte H55M-UD2H with i5-760) that has 2 disks
with partitions used for RAID 1 MD devices. X was in use. After
testing that the system would boot properly if
On Nov 8, 2010, at 9:06 AM, Przemysław Pawełczyk pp...@o2.pl wrote:
On Mon, 8 Nov 2010 08:55:30 -0500
Rob Kampen rkam...@kampensonline.com wrote:
On Nov 8, 2010, at 8:35 AM, Przemysław Pawełczyk pp...@o2.pl wrote:
On Mon, 08 Nov 2010 08:08:42 -0500
Rob Kampen
On Mon, Nov 8, 2010 at 7:25 AM, Ben McGinnes b...@adversary.org wrote:
Assuming that Virtualmin doesn't have support for real virtual users
or redirecting to MySQL for that then you have three basic choices:
1a) Use a different management interface for managing the
Postfix/Dovecot
On 11/8/2010 1:20 PM, Mike Fedyk wrote:
On Mon, Nov 8, 2010 at 7:25 AM, Ben McGinnesb...@adversary.org wrote:
Assuming that Virtualmin doesn't have support for real virtual users
or redirecting to MySQL for that then you have three basic choices:
1a) Use a different management interface for
Hi All,
Was wondering if anyone knows there are any separate rpms to be able to
install a true bourne shell and not one linked to bash.
Thanks in advance,
Phil
--
Manners are the unenforced standards of conduct which
demonstrate that a person is proper, polite, and refined.
I think no due to Copyright issues.
The closest is probably dash which describes itself as a POSIX comptatible
shell.
Clive
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
uname -a
Linux 2.6.18-194.17.4.el5.centos.plus #1 SMP Tue Oct 26 04:07:11 EDT 2010
x86_64 x86_64 x86_64 GNU/Linux
I thought -q meant 'no output'. Recently yum -q has started spewing the
following garbage, can anyone tell me why?
thanks,
Dave
# yum -yq --security check-update 2/dev/null
Loaded
Hello List
I am attempting to setup various pam modules to consult our new LDAP
services in order to do what it needs to do.
I have setup my /etc/pam.d sudo file (for example) this way in the
attempt to accomplish this via LDAP:
[r...@vircent03:~]#cat /etc/pam.d/sudo
#%PAM-1.0
auth
ahmad riza h nst writes:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user may
reach to thousands user from several hundreds virtual domains.
what i concern is large numbers of linux system user which
Hi,
I have a fresh install of CentOS 5.5, with a minimal GNOME desktop. I
configured RPMForge as third party repo.
I updated everything first, then installed flash-plugin. (And yes, I
restarted Firefox... :oD). All I see when I try to see some things Flash
on the Internet, like Youtube or the
Niki Kovacs wrote:
Hi,
I have a fresh install of CentOS 5.5, with a minimal GNOME desktop. I
configured RPMForge as third party repo.
I updated everything first, then installed flash-plugin. (And yes, I
restarted Firefox... :oD). All I see when I try to see some things Flash
on the
On 11/08/10 2:16 PM, n...@nux.ro wrote:
ahmad riza h nst writes:
hello,
i need to setup a mail server with postfix + dovecot + webmin +
virtualmin + virtual user with linux system user. the virtual user may
reach to thousands user from several hundreds virtual domains.
what i concern is
Nicolas Thierry-Mieg a écrit :
anything in about:plugins ? (type that in your address bar in firefox)
Yeah, first thing I checked. Everything seems fine :
Shockwave Flash
Fichier : libflashplayer.so
Version :
Shockwave Flash 10.1 r82
Type MIME Description Suffixes
On Mon, 08 Nov 2010 22:42:33 +0100
Niki Kovacs cont...@kikinovak.net wrote:
$ ls -l /usr/lib/mozilla/plugins/
total 0
lrwxrwxrwx 1 root root 39 nov 8 22:22 libflashplayer.so -
/usr/lib/flash-plugin/libflashplayer.so
Which leaves me clueless. Any suggestions ?
Hi,
Try to put the flash
Niki Kovacs wrote:
Nicolas Thierry-Mieg a écrit :
anything in about:plugins ? (type that in your address bar in firefox)
Yeah, first thing I checked. Everything seems fine :
Shockwave Flash
yep looks good.
anything in dmesg after it fails?
or could it be selinux maybe?
otherwise no
Przemysław Pawełczyk a écrit :
Why do you use flash-plugin? Use the latest lib from Adobe.
32 and 64 bit versions of latest flashes:
http://labs.adobe.com/downloads/flashplayer10.html
My flash:
Shockwave Flash 10.2 d161 (from about:plugins in web browser)
I tried what you suggested.
On 11/08/10 2:28 PM, Niki Kovacs wrote:
But still, no videos can be played. Whenever I go on snotr.com,
youtube.com or the likes, I either get a blank space where the video
should be, or a black square the size of the video, but nothing in it.
I tried this on two fresh installs on two
On Mon, 08 Nov 2010 14:33:14 -0800
John R Pierce pie...@hogranch.com wrote:
On 11/08/10 2:28 PM, Niki Kovacs wrote:
But still, no videos can be played. Whenever I go on snotr.com,
youtube.com or the likes, I either get a blank space where the video
should be, or a black square the size of
On Mon, Nov 8, 2010 at 3:06 PM, Phil Savoie psavoie1...@rogers.com wrote:
Hi All,
Was wondering if anyone knows there are any separate rpms to be able to
install a true bourne shell and not one linked to bash.
Bash has some options to run in compatibility mode. Not sure what you
need, but may
On 11/08/10 3:13 PM, Kwan Lowe wrote:
On Mon, Nov 8, 2010 at 3:06 PM, Phil Savoiepsavoie1...@rogers.com wrote:
Hi All,
Was wondering if anyone knows there are any separate rpms to be able to
install a true bourne shell and not one linked to bash.
Bash has some options to run in
On 11/07/2010 03:33 AM, Nicolas Ross wrote:
Is there any other solution for building a SAN under linux ?
None of my customers use a SAN right now. I have some friends who speak
pretty highly of their Dell SAN gear (re-branded EMC CX300) with Qlogic
HBAs.
Perhaps FreeNAS would fit the bill?
http://freenas.org/features
Sent from my iPhone
On Nov 8, 2010, at 6:52 PM, Gordon Messmer yiny...@eburg.com wrote:
On 11/07/2010 03:33 AM, Nicolas Ross wrote:
Is there any other solution for building a SAN under linux ?
None of my customers use a
On 11/09/2010 12:58 AM, Tim Dunphy wrote:
Perhaps FreeNAS would fit the bill?
http://freenas.org/features
Sent from my iPhone
On Nov 8, 2010, at 6:52 PM, Gordon Messmeryiny...@eburg.com wrote:
On 11/07/2010 03:33 AM, Nicolas Ross wrote:
Is there any other solution for building a SAN
On 11/08/2010 04:06 PM, Patrick Lists wrote:
On 11/09/2010 12:58 AM, Tim Dunphy wrote:
Perhaps FreeNAS would fit the bill?
http://freenas.org/features
How about openfiler: http://www.openfiler.com/
I don't believe either of those support exporting volumes over Fibre
Channel. You could do
- Original Message -
| On 11/09/2010 12:58 AM, Tim Dunphy wrote:
| Perhaps FreeNAS would fit the bill?
|
| http://freenas.org/features
|
|
| Sent from my iPhone
|
| On Nov 8, 2010, at 6:52 PM, Gordon Messmeryiny...@eburg.com wrote:
|
| On 11/07/2010 03:33 AM, Nicolas Ross wrote:
On 11/08/10 4:29 PM, James A. Peltier wrote:
You then need a method for dealing with the high availability aspect. You
need to be able to fence the storage while a fail-over is taking place. You
need to (maybe) move MAC addresses and other storage IP bits. This is the
hard part! Getting
On 11/8/10 6:29 PM, James A. Peltier wrote:
I have a solution that is currently centered around commodity storage bricks
(Dell R510), flash PCI-E controllers, 1 or 10GbE (on separate Jumbo Frame
Data Tier) and Solaris + ZFS.
So far it has worked out really well. Each R510 is a box with a
Perhaps FreeNAS would fit the bill?
http://freenas.org/features
Thanks for the suggestions (others also), but I don't beleivee it'll do. We
need to be able to access the file system directly via FC so we can lock
files across systems. Pretty much like xSan, but not on apple. xSan is
really
On Mon, Nov 08, 2010 at 03:39:22PM -0800, John R Pierce wrote:
On 11/08/10 3:13 PM, Kwan Lowe wrote:
On Mon, Nov 8, 2010 at 3:06 PM, Phil Savoiepsavoie1...@rogers.com wrote:
Hi All,
Was wondering if anyone knows there are any separate rpms to be able to
I thought it did that by
On Tue, Nov 9, 2010 at 4:36 AM, Nicolas Ross rossnick-li...@cybercat.ca wrote:
Perhaps FreeNAS would fit the bill?
http://freenas.org/features
Thanks for the suggestions (others also), but I don't beleivee it'll do. We
need to be able to access the file system directly via FC so we can lock
On 11/08/10 7:34 PM, Scott Robbins wrote:
On Mon, Nov 08, 2010 at 03:39:22PM -0800, John R Pierce wrote:
On 11/08/10 3:13 PM, Kwan Lowe wrote:
On Mon, Nov 8, 2010 at 3:06 PM, Phil Savoiepsavoie1...@rogers.com wrote:
Hi All,
Was wondering if anyone knows there are any separate rpms to be
On Tue, Nov 9, 2010 at 12:13 AM, Kwan Lowe kwan.l...@gmail.com wrote:
On Mon, Nov 8, 2010 at 3:06 PM, Phil Savoie psavoie1...@rogers.com wrote:
Hi All,
Was wondering if anyone knows there are any separate rpms to be able to
install a true bourne shell and not one linked to bash.
Bash has
Przemysław Pawełczyk a écrit :
Did you (Niki) try to d/load any flv from youtube.com and run it with
(s)mplayer for example?
Perhaps try to change video driver or set up VBox, install CentOS in it,
and then smplayer. VBox has excellent vesa driver and CentOS is
very good host to run VBox
The virtual network is great for connecting two or more virtual guests
directly. Its fast and doesn't add traffic to your physical lan.
If you have a virtual guest that gets a lot of traffic, then giving it its
own network card (nic) can help speed things up as well as keep the heavy
traffic
Buen día
Favor amigos, cuando envíen mails a la lista pongan algo más claro las
descripciones de su problema, opinión, ó información a compartir. Ej
poner simplemente HELP en la línea de asunto hace que muchos de nosotros
pasemos por alto dichos mensajes.
Saludos
--
David Polanco
Colombia
Hola compañeros tengo un problema con la tarjeta red del servidor
MG110 G6 que no me responde el ping desde otros equipos y ni da ping
a ningun equipo. La informacion que me piden es la siguiente:
1. La targeta funciona y el ethtool entrega la siguiente informacion
Settings for eth0:
2010/11/7 Miguel Angel Murcia Palacio murciaan...@gmail.com:
Hola compañeros tengo un problema con la tarjeta red del servidor
MG110 G6 que no me responde el ping desde otros equipos y ni da ping
a ningun equipo. La informacion que me piden es la siguiente:
1. La targeta funciona y el
Bueno perdón por el error de sintaxis la ubicación exacta es:
/etc/openldap/slapd.conf
y si es un CentOS 5.5 bien actualizado al día de hoy
Saludos
El 05/11/10 17:07, Renato Covarrubias escribió:
Que rara la ubicación del archivo de configuración. Es un CentOS? Ya viste
que te dice el log
Mi pregunta es la siguiente a alguna forma o manera de usar los
repositorios de centos en una RHEL4 de ser asi les agradeceria su
colaboracio
--
Julio Cèsar Carballo Lòpez
Administrador de Red
Instituto de Geografìa Tropical
Debian GNU/Linux User
Linux Registered User: 477739
Telef:
Miguel.
Revisa tu archivo resolv (/etc/resolv.conf, que tengas los o el servidor de
nombres que cumple ese rol), revisa las rutas (route -n) en los equipos que
funciona y en el que te esta generando el inconveniente, revisa que tu
mascara y gateway esten igual al de los equipos de la red que si
On 11/08/2010 10:38 AM, Julio Cesar wrote:
Mi pregunta es la siguiente a alguna forma o manera de usar los
repositorios de centos en una RHEL4 de ser asi les agradeceria su
colaboracio
hola
sí, funcionan, instala el paquete yum de centos en tu redhat. Y quizá te
pida instalar algunos
rpm yum
luego añade los repos en /etc/yum.repo/centos.repo
Yo lo tengo trabajando en RHEL beta6 y funciona con dag , rpmfusion, etc
slds
2010/11/8 Julio Cesar jce...@geotech.cu
Mi pregunta es la siguiente a alguna forma o manera de usar los
repositorios de centos en una RHEL4 de ser asi
No, el tomara los de CentOS 4.
El 8 de noviembre de 2010 13:07, Julio Cesar jce...@geotech.cu escribió:
On Mon, 08 Nov 2010 12:54:21 -0500, Ing. Ernesto Pérez Estévez
cen...@nuestroserver.com wrote:
On 11/08/2010 10:38 AM, Julio Cesar wrote:
Mi pregunta es la siguiente a alguna forma
mi pregunta es la sigueinte me sirve los repos de centos 5.5 a mi RHEL4
?
no, como mismo tampoco funcionan en centos-4.
pero puedes usar los repos de centos-4 para tu rhel4.
gracias
___
CentOS-es mailing list
CentOS-es@centos.org
Eduardo te comento que hoy estuvea full con el Apache!!! me está gustando Linux
cuando empezás a entender como funciona es un mundo rarísimo y me gusta eso es
bueno.
Gente de Centos les comento que en el día de hoy pude subir mi pequeña página
(un index.html) al navegador es por ello que
ok, acabo de probar y me da un error te lo pongo:
Setting up install ProcessNo package bin-chroot available.Nothing to do.
Lucas Demián Smud
Oficina de Soporte Técnico y Administración de Servidores
Devoto PC
Devoto, Capital Federal
Cel.: 15 4025 6471
Date: Mon,
busca el paquete primero con la siguiente insrtuccion:
yum search bind
Asi visualizaras los paquetes que contienen bind
luego de visualizar el paquete de tu arquitectura digitas:
yum install bind-chroot.i386 o yum install bind-chroot.x86_64
Saludos.
Carlos R.
2010/11/8 Lucas Smud
Carlos:
Con la primera opción me dice:que está instalado en la última versión...
Y la segunda: No package bind-chroot.i386_64 available.
¿tendré que agregarlo a mano?
http://www.ecualug.org/2007/06/24/comos/configurar_un_servidor_dns_con_bind_en_centos5
¿Es confiable? ¿qué decís?
Lucas
Hola amigos del foro, quería saber si alguien tiene un modelo de éste archivo
para pasarme del BInd porque al instalarlo no me aparece en esa ruta yo nose si
editarlo manualmente o ver si de alguna otra forma lo puedo instalar porque
supongo que si no se instaló fue por algo.
Tengo la versión
Lucas, el paquete que te suministra el archivo que necesitas parametizar es
el bind-chroot.
prueba este comando para verificar si el paquete bind-chroot esta
instalado: rpm -qa |grep bind
la salida de ese comado debe mostrarte que esta instalado el bind.i386 (si
tu arquitectura es de 32) o
Si, ese archivo lo tengo. En ese caso ¿qué se hace? uso este archivo el
named.caching
Lucas Demián Smud
Oficina de Soporte Técnico y Administración de Servidores
Devoto PC
Devoto, Capital Federal
Cel.: 15 4025 6471
From: eduardo.ate...@gmail.com
To:
71 matches
Mail list logo
