On 04/25/2011 05:03 PM, Phil Schaffner wrote:
carlopmart wrote on 04/23/2011 05:04 PM:
...
How can I manage automatically memory ballooning under a kvm host
(C5.6 and future C6)??
Looks like you got an answer to your nearly identical post on rhelv6-list:
On 25/04/11 09:34, Ljubomir Ljubojevic wrote:
His ADSL modem is already on 192.168.1.x subnet, so CentOS WAN NIC
already uses it. And I do not expect resetting router to defaults every
week. Maybe never.
Ljubomir
Ah yes - forgot that titbit of information - :(.
In that case, what you
Hello,
I was using CentOS 5.5 as a playground VM at my WinXP notebook
and now I'm migrating to a new CentOS 5.6 install
and everything has worked well - except samba.
I have this very permissive config to export my ~/src dir:
# cat /etc/samba/smb.conf
[global]
guest ok= yes
guest
# chcon -R -t samba_share_t src
hasn't helped either
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Mon, Apr 25, 2011 at 10:58:26AM +0200, Alexander Farber wrote:
# chcon -R -t samba_share_t src
hasn't helped either
Take a look at the front of /etc/samba/smb.conf; there is a blurb there
about selinux and samba.
John
--
Normal
On 25/04/11 09:49, Alexander Farber wrote:
Hello,
I was using CentOS 5.5 as a playground VM at my WinXP notebook
and now I'm migrating to a new CentOS 5.6 install
and everything has worked well - except samba.
I have this very permissive config to export my ~/src dir:
# cat
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/23/2011 07:51 AM, David McGuffey wrote:
On Fri, 2011-04-22 at 06:50 -0400, David McGuffey wrote:
On Fri, 2011-04-22 at 06:18 -0400, Daniel J Walsh wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/21/2011 09:47 PM, David
Just thought I'd pass along an error I received this weekend after
upgrading two servers to 5.6. Both are HP Proliant DL380 servers
running 64-bit, but one is a G6 model and one is a G7. After the
upgrade and the reboot to the 2.6.18-238.9.1.el5 kernel, both servers
displayed the following
On 04/21/2011 06:41 PM, Bob Hepple wrote:
On Thu, 21 Apr 2011 11:30:37 +0100
Karanbir Singh mail-li...@karan.org wrote:
On 04/21/2011 12:18 AM, Bob Hepple wrote:
Hmmm - it's 10 days on and I still can't see all of the [a-l]
*.src.rpm's. I strongly suspect that something's gone wrong - or
Thank you!
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 04/25/2011 08:58 AM, Windsor Dave L. (AdP/TEF7.1) wrote:
Just thought I'd pass along an error I received this weekend after
upgrading two servers to 5.6. Both are HP Proliant DL380 servers
running 64-bit, but one is a G6 model and one is a G7. After the
upgrade and the reboot to the
On 4/25/2011 10:26 AM, Johnny Hughes wrote:
On 04/25/2011 08:58 AM, Windsor Dave L. (AdP/TEF7.1) wrote:
Just thought I'd pass along an error I received this weekend after
upgrading two servers to 5.6. Both are HP Proliant DL380 servers
running 64-bit, but one is a G6 model and one is a G7.
On 25/04/11 15:44, Windsor Dave L. (AdP/TEF7.1) wrote:
On 4/25/2011 10:26 AM, Johnny Hughes wrote:
On 04/25/2011 08:58 AM, Windsor Dave L. (AdP/TEF7.1) wrote:
Just thought I'd pass along an error I received this weekend after
upgrading two servers to 5.6. Both are HP Proliant DL380 servers
Now that the subversion package in CentOS is a usable version I've
replaced a Collabnet package with it. But, it seems odd that the
svnserve process runs as root instead of having a unique user to own the
files and run the process like most other daemons. Did I miss something
in the setup?
Hello,
how do you block incoming AND outgoing traffic to a site?
I have 2 drop lines for a site in my /etc/sysconfig/iptables:
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [294:35064]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -s
On Mon, Apr 25, 2011 at 06:03:29PM +0200, Alexander Farber wrote:
Hello,
how do you block incoming AND outgoing traffic to a site?
I have 2 drop lines for a site in my /etc/sysconfig/iptables:
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [294:35064]
-A INPUT -m state
Stephen Harris wrote:
On Mon, Apr 25, 2011 at 06:03:29PM +0200, Alexander Farber wrote:
Hello,
how do you block incoming AND outgoing traffic to a site?
I have 2 drop lines for a site in my /etc/sysconfig/iptables:
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [294:35064]
On 4/13/2011 7:35 AM, Mailing List wrote:
Hi,
I have upgraded my Dell C521 to the latest 5.6. I have always used
ntp to sync this machine and then the rest of the machines in the
network would sync from it. Since the update I cannot keep the right
time on the machine. This is with / without
That's exactly how I have my home network configured. Had it for many
years actually.
There's a Linux box that is the central point of the network. It has
several network cards: one for the cable modem, another for the WiFi
access point, another for the local LAN.
On the cable modem, I just
Thank you, it seems to work now
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Mailing List
Sent: Monday, April 25, 2011 13:57
To: CentOS mailing list
Subject: Re: [CentOS] CentOs 5.6 and Time Sync
On 4/13/2011 7:35 AM, Mailing List wrote:
Hi,
I have
Anthony wrote:
what you need do is connect the Linksys to the same switch
as the one which hosts your eth1 and ADSL modem. Go to the
configuration pages on the Linksys, change the IP and subnet, then when
you commit and reboot, disconnect the ethernet cable from that switch
and onto the
On 04/25/11 12:28 PM, Florin Andrei wrote:
The WiFi access point is connected to the server via a loopback Ethernet
cable actually. There's no need to use a switch when there are only 2
devices connected. Also, in this setup, there's no point to use a WiFi
router - a simple WiFi access point
On 04/25/2011 10:19 AM, Ned Slider wrote:
On 25/04/11 15:44, Windsor Dave L. (AdP/TEF7.1) wrote:
On 4/25/2011 10:26 AM, Johnny Hughes wrote:
On 04/25/2011 08:58 AM, Windsor Dave L. (AdP/TEF7.1) wrote:
Just thought I'd pass along an error I received this weekend after
upgrading two servers to
Been looking for a while on this before resorting to asking. I have
an .htaccess file like so.
order allow,deny
allow from x.x.x.0/24
I have this in my root html directory and it works fine. Only allows
access by the x.x.x.0/24 subnet. Thing is I have one file
~siteinfo.html that I want to
At Mon, 25 Apr 2011 13:20:58 -0700 CentOS mailing list centos@centos.org
wrote:
On 04/25/11 12:28 PM, Florin Andrei wrote:
The WiFi access point is connected to the server via a loopback Ethernet
cable actually. There's no need to use a switch when there are only 2
devices connected.
On 4/25/2011 5:15 PM, Johnny Hughes wrote:
On 04/25/2011 10:19 AM, Ned Slider wrote:
On 25/04/11 15:44, Windsor Dave L. (AdP/TEF7.1) wrote:
removed
I saw and reported the issue during QA for CentOS-5.6.
I think it's quite widespread, I saw it on generic Intel-based motherboards.
I've not
On Mon, Apr 25, 2011 at 04:23:41PM -0500, Matt wrote:
Been looking for a while on this before resorting to asking. I have
an .htaccess file like so.
order allow,deny
allow from x.x.x.0/24
I have this in my root html directory and it works fine. Only allows
access by the x.x.x.0/24
I'm having problems trying to install CentOS as a KVM guest despite
following the wikis and howtos.
The problem is that most of the instructions skip the part that
happens after virt-install... It seems that something blindingly
obvious happens if nothing goes wrong and most instructions
Dear All !
I am trying to figure out, why I get blank screen with a dead system after
resume from suspend or hibernation. It seems, that on the way to suspend or
hibernation now works fine in most cases, but when it awakes , everything
freezes , no picture , dead-boy , both with kde and gnome
On Sunday, April 24, 2011 9:04 AM +0200 Alexander Farber
alexander.far...@gmail.com wrote:
If comments not possible, please share few tricks -
how do YOU usually use iptables on CentOS,
i.e. there is sudo service iptables save,
but I've yet to discover its usefulness
I keep related rules in
On Tue, 26 Apr 2011, Emmanuel Noobadmin wrote:
I'm having problems trying to install CentOS as a KVM guest despite
following the wikis and howtos.
The problem is that most of the instructions skip the part that
happens after virt-install... It seems that something blindingly
obvious
There's a number of diagrams around the Internet illustrating the path
packets take through the Linux kernel, including the various firewall
modules, that's quite helpful in understanding which rules should go in
which table.
Here's one that's not bad:
Kenneth Porter wrote:
There's a number of diagrams around the Internet illustrating the path
packets take through the Linux kernel, including the various firewall
modules, that's quite helpful in understanding which rules should go in
which table.
Here's one that's not bad:
On 04/25/2011 04:32 PM, Windsor Dave L. (AdP/TEF7.1) wrote:
On 4/25/2011 5:15 PM, Johnny Hughes wrote:
On 04/25/2011 10:19 AM, Ned Slider wrote:
On 25/04/11 15:44, Windsor Dave L. (AdP/TEF7.1) wrote:
removed
I saw and reported the issue during QA for CentOS-5.6.
I think it's quite
On 04/25/2011 09:16 AM, Filipe Rosset wrote:
On 04/21/2011 06:41 PM, Bob Hepple wrote:
On Thu, 21 Apr 2011 11:30:37 +0100
Karanbir Singh mail-li...@karan.org wrote:
On 04/21/2011 12:18 AM, Bob Hepple wrote:
Hmmm - it's 10 days on and I still can't see all of the [a-l]
*.src.rpm's. I
On 04/25/2011 10:35 PM, Johnny Hughes wrote:
I have pushed what I think are all of the SRPMS for os and updates.
Great, thank you!
--
Filipe
Rio Grande do Sul, Brazil
___
CentOS mailing list
CentOS@centos.org
assuming you are talking about /etc/sysconfig/iptables , hash is indeed
the comment mark, and works fine.
In my file on this system all comment lines have a hash as first
character on the line though, so perhaps it doesn't like end-of-line
comments but only accepts full lines of comment.
38 matches
Mail list logo
