Hi,
I have uptodate x86_64 CentOS 5 with official repositories.
mdadm version is v2.5.4 - 13 October 2006
This version is known to have problems with raid10 configurations.
Sadly, I have a 4 disk raid10 on this system.
I tried adding Dag's repository but system complains about some
packages
Well, I should add a terrible story for XFS...
I did a yum update and after updating many packages I rebooted and viola...
Old xfs module ruined my 1.2TB partition. After updating to correct module and
hours of xfs_repair I had to move and rename 500 subfolders from lost+found.
I am using CentOS
On Mon, May 12, 2008 at 11:48 PM, Tru Huynh [EMAIL PROTECTED] wrote:
On Mon, May 12, 2008 at 11:00:18PM +0300, Linux wrote:
Well, I should add a terrible story for XFS...
I did a yum update and after updating many packages I rebooted and
viola...
You seem to enjoy living dangerously
On Tue, May 13, 2008 at 1:15 AM, Tru Huynh [EMAIL PROTECTED] wrote:
On Tue, May 13, 2008 at 12:40:22AM +0300, Linux wrote:
What a coincidence. That is the 1st time I live such a thing. Well,
show me a way to prove.
/var/log/messages ?
Only a small part of it.
This log is after update
On Wed, May 14, 2008 at 9:58 PM, Doug Tucker [EMAIL PROTECTED] wrote:
This is a matter of agreeing to disagree on the release of a kernel and
a supported file system. If you had read my thread and subsequent
paragraph you're taking issue with properly, you would have gotten that.
My whole
On Wed, May 14, 2008 at 11:50 PM, John R Pierce [EMAIL PROTECTED] wrote:
btw, what is WITH all these lame gmail addresses? linuxlist ? centoslist
?? Do I call you Mr Linux, or Mr List ?
Nothing to do with gmail. About calling me, it's a nice thing but
probably not needed. And I also know
I guess your Gigabyte is a desktop one
Well, in production I used to use Intel server and workstation boards.
Not the best but more cooperative than most manifacturers with kernel
team I guess.
Currently I am testing some AMD stuff...
On Thu, May 15, 2008 at 2:43 PM, Ryan Nichols [EMAIL
On Tue, May 20, 2008 at 8:13 PM, Nicholas [EMAIL PROTECTED] wrote:
Typically Linux hackers can hack the kernel to use very large RAM. Current
applications are built to access up to 4Gb RAM at a time only. For machines
with RAM of more than 4Gb you need to verify that the CPU comes
On Wed, May 21, 2008 at 3:59 AM, Nicholas [EMAIL PROTECTED] wrote:
Seems like it is the way Intel chips are designed. One solution would be to
ensure that 64bit is used. However, due to cost I am sure many would have
gone for the 32bit machines with AHCI mode.
Well, 64bit is the solution to
On Thu, May 22, 2008 at 7:12 PM, Guy Boisvert [EMAIL PROTECTED] wrote:
You do not need two (2) raid controllers unless you want to have
redundancy at the controller level. Adaptec, 3Ware, etc do RAID 50.
For RAID 50, you need at least 6 disks.
http://en.wikipedia.org/wiki/RAID
For
On Fri, May 23, 2008 at 4:19 AM, Christopher Chan
[EMAIL PROTECTED] wrote:
And stick with md-raid 10 (also known as software raid) because it is
much more intelligently designed than any
closed-source-embedded-raid-controller.
This was valid until...quite a few years ago.
Has hardware-raid
3 disks is enough to supply a
minimum level of redundancy. You should have 2 copies of each stripes
on either 2 of 3 disks. But in 3 disk configuration loss of 2 disk
means total loss. Go check with man mdadm.
Lastly, it's kinda strange that your name is Linux: Maybe you're young and
your
tends to show theirs for a comparison. But again, according to
general inclination, I have a great feeling that I am right. Besides,
this is all about the philosophy of open-source. linux kernel-raid
still has my vote.
Nevertheless, closed-source firmwares are everywhere, should we become
paranoid
On Sat, May 24, 2008 at 8:29 PM, Fred Noz [EMAIL PROTECTED] wrote:
In addition to easy maintenance, readonly-root adds a layer of security.
The security is broken if someone gains access to the root user, but
then many security protections are lost if someone gains root.
However, this should
Hi,
Without any update, hardware/software modification, etc... one of my
systems Hourly restart problem started again. Currently, I counted 5
restarts at 59th minute. No log entry, no console error, nothing
really interesting. If I do not see camera records with my own eyes,
I'll suspect about
On Mon, May 26, 2008 at 12:30 AM, Gregg McClintic [EMAIL PROTECTED] wrote:
Anything in the bios called watchdog turned on?
Waiting for morning (it's late night here) for further diag.
Should I disable it? Or is it malfunctioning because of CentOS?
Thanks...
On Mon, May 26, 2008 at 2:15 AM, Karanbir Singh [EMAIL PROTECTED] wrote:
I've been reading some of your recent comments, Anonymous looser, and
I've really got to say this - you seem to make some authoritative style
comments on things you really dont know much about. eg. in this case -
the
On Mon, May 26, 2008 at 3:16 AM, Christopher Chan
[EMAIL PROTECTED] wrote:
I believe you cannot do it via the installer yet. Can anybody confirm the
presence of raid10 personality in Centos 5?
Installer does not have raid10 as an option. Not sure whether boot cd
has this module or not. But
On Sat, May 31, 2008 at 1:16 PM, Johnny Hughes [EMAIL PROTECTED] wrote:
I also normally build all the extras kmods while I build the centosplus
kernel, so they were also not yet done ... however I did go ahead and build
I dont intend to blame anybody but kmod_xfs was a couple of days late
for
On Mon, Jun 2, 2008 at 6:22 PM, David Mackintosh
[EMAIL PROTECTED] wrote:
...which I think is because the IDE controller isn't really
recognized, or is pretending to be a SATA controller:
For my cruiosity, what is your current kernel version?
___
working configurations with 4 disk cheap machines.
Guess I should say something.
/sd[abcd]1: 20 GB, ext3, RAID-1 as /dev/md0, linux-raid autodetect
(type: fd), boot flag active, mounted as / (incl. /boot)
/sd[abcd][23...]: whatever you want
I installed grub like this:
grub device (hd0) /dev/sda
Hi,
I have a CentOS 5.0 running as a web server.
# uname -a
Linux hostnamehidden.net 2.6.18-53.1.14.el5 #1 SMP Wed Mar 5 11:37:38
EST 2008 x86_64 x86_64 x86_64 GNU/Linux
Every 59 minutes (maybe every hour) it reboots without any logs,
without any traces and unfortunately with breaking software
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED] wrote:
] Every 59 minutes (maybe every hour) it reboots without any logs,
] without any traces and unfortunately with breaking software raid.
] After reboot dmesg does not have any strange entries.
this really only helps
On Fri, Apr 11, 2008 at 2:43 AM, William L. Maltby
[EMAIL PROTECTED] wrote:
On Fri, 2008-04-11 at 02:02 +0300, Linux wrote:
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED] wrote:
] Every 59 minutes (maybe every hour) it reboots without any logs,
] without any
On Fri, Apr 11, 2008 at 3:18 AM, Linux [EMAIL PROTECTED] wrote:
On Fri, Apr 11, 2008 at 2:43 AM, William L. Maltby
[EMAIL PROTECTED] wrote:
On Fri, 2008-04-11 at 02:02 +0300, Linux wrote:
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED]
wrote:
] Every 59
Amigos:
Mi nombre es Luis y llevo bastante tiempo trabajando con Linux a nivel de
escritorio; ahora pretendo involucarme con el tema de los servidores sobre
CentOS.
Como no tengo preparación formal en tecnología voy a molestarlos
con algunas consultas que me ayudarán a entender la forma de
Estimados:
Tengo instalado Centos 5.5 en modo texto sobre una maquina virtual sobre Ubuntu,
estoy intentando configurar un cliente de correo desde la consola; me he
documentaqdo que no existe un cliente de correo propiamente tal, sino que debo
trabajar con dos componentes: un Mail User Agent
Voy a añadir RPMForge, EPEL ya lo tengo instalado.
Gracias por el consejo
LV
El 2013-10-06 19:52, David González Romero escribió:
Lastima que Linux-l haya desaparecido, ahi había mucha buena info que
otros
podiamos usar.
Luis te recomiendo intentar añadir los repo EPEL y RPMForge
Hello.
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
___
CentOS mailing list
CentOS@centos.org
2008/8/17 Rudi Ahlers [EMAIL PROTECTED]:
On Sun, Aug 17, 2008 at 11:19 AM, Linux Man [EMAIL PROTECTED] wrote:
Hello.
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
Thanks too all for you help, works great!
Best regards
2008/8/17 Les Mikesell [EMAIL PROTECTED]:
Mike wrote:
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
I've got a RAID card (3ware 9650SE-2LP) that wasn't supported by the
in-kernel driver until 2.6.19+
Since CentOS 5.0 is based on 2.6.18-8.el5 is was looking for a way to
incorporate their driver from the website so I wouldn't have to use
the linux dd kernel option all the time. (trying
/
recreating CentOS 5 stage2.img? It's obviously different from the old
ones... is this documented anywhere?
Thanks!
- G.
On 8/28/07, Karanbir Singh [EMAIL PROTECTED] wrote:
semi linux wrote:
Since CentOS 5.0 is based on 2.6.18-8.el5 is was looking for a way to
incorporate their driver from
On 8/28/07, Karanbir Singh [EMAIL PROTECTED] wrote:
semi linux wrote:
Good call... I had thought of that but had assumed it would only
present me the same options as anaconda does (all local - hdx and/or
fdx)... as it turns-out, the --source=http:// could work nicely...
I'll give
Is there some kind of caveat to using the rootpw --iscrypted directive
and then specifying a graphical install?
I always seem to get the prompt coming up...
If I remove the graphical and do a text install, it works fine and if
I remove the --iscrypted and put a plain-text password in there, it
Sorry, should have specified - I'm using kickstart to load my machine(s).
On 9/4/07, semi linux [EMAIL PROTECTED] wrote:
Is there some kind of caveat to using the rootpw --iscrypted directive
and then specifying a graphical install?
I always seem to get the prompt coming up...
If I remove
On 9/5/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux wrote:
Sorry, should have specified - I'm using kickstart to load my machine(s).
On 9/4/07, semi linux [EMAIL PROTECTED] wrote:
Is there some kind of caveat to using the rootpw --iscrypted directive
and then specifying a graphical
the lines to make sure I don't have any special
characters in there...
The only thin I can think of is that maybe my crypted password
contains an escape sequence that might not be properly handled in
anaconda?
I'm completely stumped.
- G.
On 9/6/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind of response, but if the content (download
or page itself) is larger in size (downloads never pass 100K), then it
On 9/20/07, Scott Silva [EMAIL PROTECTED] wrote:
semi linux spake the following on 9/20/2007 4:31 PM:
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind
On 9/20/07, James A. Peltier [EMAIL PROTECTED] wrote:
semi linux wrote:
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind of response, but if the content
On 9/20/07, Joshua Baker-LePain [EMAIL PROTECTED] wrote:
On Thu, 20 Sep 2007 at 4:31pm, semi linux wrote
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some
On 9/21/07, Tony Mountifield [EMAIL PROTECTED] wrote:
In article [EMAIL PROTECTED],
Joshua Baker-LePain [EMAIL PROTECTED] wrote:
On Thu, 20 Sep 2007 at 5:04pm, semi linux wrote
Wicked! that worked... How weird... I'm going to have to look this up
and read about it... it seems weird
I just finished installing CentOS 5 (again)... and I'm having trouble
with my X config (I _think_).
If I 'startx' then switch to a console (using CTRL+ALT+F*) and then
back to X (CTRL+ALT+F7), 1/2 the time it comes back, the other half I
get a black screen and I can never recover the session.
X
On 9/27/07, Bart Schaefer [EMAIL PROTECTED] wrote:
On 9/26/07, semi linux [EMAIL PROTECTED] wrote:
I just finished installing CentOS 5 (again)... and I'm having trouble
with my X config (I _think_).
If I 'startx' then switch to a console (using CTRL+ALT+F*) and then
back to X (CTRL+ALT
altogether... are there any
other suggestions?
- Gareth
On 9/7/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux wrote:
The only thin I can think of is that maybe my crypted
password
contains an escape sequence that might not be properly
handled in
anaconda?
The crypted password
Hey,
I'm trying to run a kickstart script on a new piece of hardware...
I've never used this HW before, so it's possible that there may be
something faulty...
After the DVD boots, I type linux ks=http://blah/blah.ks; and hit enter.
Once I get to the anaconda line which says running /sbin/loader
I'm building a Linux box to act as Proxy/Router/Firewall.
I'm using CentOS 4.5, with an old motherboard (Asus A8V-X), and two
Ethernet NIC, based on a realtek chip, that's widely supported under
2.4 and later kernel (the cards were functioning excellent in another
PC whit Fedora Core 1).
CentOS
No, it doesn't use that.
The unusual things that I use is Nat (S and D), and mark to support TC.
2007/10/22, Barry Brimer [EMAIL PROTECTED]:
Quoting Linux Man [EMAIL PROTECTED]:
I'm building a Linux box to act as Proxy/Router/Firewall.
I'm using CentOS 4.5, with an old motherboard (Asus A8V
or knoppix witch module was loaded for your two nic.
Then try a
# modprobe your_module_name_here
then
# dmesg
to look if both nics where recognized.
If so you have to update your modprobe.conf
Alain
Regards
On 10/22/07, Linux Man [EMAIL PROTECTED] wrote:
I'm building a Linux box to act
Hello
I'm building a router/proxy/firewall, the default governor is
ondemand, but for this application, what governor is best suited? (for
example conservative?)
Thanks at all!
Best regards
___
CentOS mailing list
CentOS@centos.org
I forgot tell that the os is CentOS 5 i386
sorry
2007/10/24, Linux Man [EMAIL PROTECTED]:
Hello
I'm building a router/proxy/firewall, the default governor is
ondemand, but for this application, what governor is best suited? (for
example conservative?)
Thanks at all!
Best regards
On Oct 15, 2007 5:49 AM, Johnny Hughes [EMAIL PROTECTED] wrote:
David Hrbáč wrote:
Hi,
anyone to point me URL on initrd.img creating? I have custom kernel and
want to create initrd.img for install media.
mkinitrd /tmp/initrd.img 2.6.18-8.1.14.el5.hrb -v -f create unusable
file for
On Nov 13, 2007 5:49 AM, David Hrbáč [EMAIL PROTECTED] wrote:
Alain Spineux napsal(a):
On Oct 15, 2007 2:09 PM, David Hrbáč [EMAIL PROTECTED] wrote:
Hi,
anyone to point me URL on initrd.img creating? I have custom kernel and
want to create initrd.img for install media.
mkinitrd
Hi,
Hope any one can help me. I am running centos 5.2 with sendmail and rbl
feature. I need to recieve all emails come to my sales account regardless of
rbl .
I looked on web and gave up. All I found was if I added To:sales@ ok in my
sendmail.mc , sales account will bypass rbl and get all
Hi,
I am running RHEL3u8 two node cluster,which is running oracle 9i
database.I am facing problem while rebooting second node causing my
oracle database get stopped in the active node 1 which is running my
database.so i checked below probabilities to find out when the
database get stopped.
Hi,
You can create the iptables rules to block the ssh connection limit rate wise.
Create a new chain named ssh_check
/sbin/iptables -N SSH_CHECK
Redirecting all request for 22 port to new chain SSH_CHECK
/sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -j SSH_CHECK
Then
Hi all,
I am running squid proxy server integrated with Content filter
Dansguardian, squidguard and clamav for Http level scanning on centos
5 .Configured webmin management tool to create and manage access
control using squidguard plug in. Now it is serving request for 100
machines and Below
Hi,
Tell me how much is the swap space you assigned and also you can
use below commands to trace out the cause of such huge I/O.Also are
using SAN or local storage?.I don't think so you need explanation for
below commands.Run all the commands and redirect it to some file and
send it to
Hi,
If you want to allow one ip to access one destination then you can
write the below rule in iptables.
iptables -t nat -A POSTROUTING -s 192.168.101.230 -d centosip -j MASQUERADE
iptables -t nat -A POSTROUTING -d 192.168.101.230 -s centosip -j MASQUERADE
For remianing ip you can write a
/etc/sysconfig/network-scripts/ifcfg-eth1
/etc/sysconfig/network-scripts/ifcfg-eth2
/etc/sysconfig/network-scripts/ifcfg-eth3
/etc/cluster/cluster.conf
And external ip address is removed from bond0. - I assume here
external IP is 10.0.181.41, right?
Thanks
Gowrishankar Rajaiyan | A Linux Fanatic
Fabio Macchi wrote:
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of
A Linux Fanatic
Sent: martedì 23 dicembre 2008 06:08
To: CentOS mailing list
Subject: Re: [CentOS] cluster - ip address lost when service stopped
Fabio Macchi wrote
Hi,
We are running java application on centos4 update 5 64 bit on sun
blade x6250 hardware.But for the last couple of days we observed that
kacpid daemon eating more cpu.Attached the top output below.Can any
one suggest me how to fix the same since it is my critical production
i need your
HI,
I am running oracle 10GR2 with ASM (raw luns) on two nodes running
centos 5 cluster for high availability.Can any one provide me the
oracle star tup (start,stop and status )script to use by the cluster
rgmanager so that it will stop , start and check the status by the
cluster .I am in
Server built: Jan 30 2007 09:56:16
Kernel : 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64
x86_64 x86_64 GNU/Linux
Server Hardware :
MAIN MEMORY
(i) Memory Size 4 GB Dual-Core Intel 5160 processors.
httpd.conf
Timeout 300
KeepAlive On
MaxKeepAliveRequests 1000
KeepAliveTimeout 150
enough is enough already.
can some centos admin please discipline, ban and/or get rid of Radu-Cristian
FOTESCU aka beranger...@yahoo.ca
please?
not only has he physically threatened a contributor, his language behavior
are more than inappropriate for such a professional
guys,
i have installed mailscanner, spamassassin, etc on my machine. This was done
sometime ago. Some of these rpms i got not frm centos repos.
What command ( or yum command ) can i use to find out which repo did this
installled package come from.
yum info packagename just says;
repo :
Frank,
On Mon, 03 Aug 2009 23:33:52 -0700 (PDT)
Linux Advocate wrote:
What command ( or yum command ) can i use to find out which repo did this
installled package come from.
rpm -qi packagename
# rpm -qi spamassassin
Name: spamassassin Relocations: /usr
What command ( or yum command ) can i use to find out which repo did this
installled package come from.
rpm -qi packagename
# rpm -qi mailscanner
Name: mailscanner Relocations: (not relocatable)
Version : 4.74.13 Vendor:
Guys,
i have heard of vispan, phplistadmin, spamstat from the mailscanner manual and
would like to experiment with them.
1. Any thoughts on them? ( i am trying to avoid mailwatch bcos i think vispan
is better fit for reporting)
2. I have googled for their centos rpms but no luck? Any ideas
Yes, I have found this is a limitation of yum. It would be nice if the
information about the source repository could be stored somewhere.
If these were installed after the initial OS installation, and you haven't
done a yum clean, you might be able to glean some info from the cache:
#
- Original Message
From: William L. Maltby centos4b...@triad.rr.com
To: CentOS mailing list centos@centos.org
Sent: Tuesday, August 4, 2009 4:15:40 PM
Subject: Re: [CentOS] firewall question
On Mon, 2009-08-03 at 17:39 -0500, Lanny Marcus wrote:
Or IPcop?
BTW,
guys, i have the yum plugin - fastest mirror . But not even once i have seen
it selecting repos which are near my region such as japan or australia ( where
i get the best speeds). Something is wrong.
It seems stuck with these 3 sites ;
Determining fastest mirrors
* ftp-stud.fht-esslingen.de :
i have tried yum clean all , yum clean metadata
- Original Message
From: Linux Advocate linuxhous...@yahoo.com
To: CentOS mailing list centos@centos.org
Sent: Saturday, August 22, 2009 8:56:37 PM
Subject: [CentOS] fasttest mirror -doesnt seem to pick sites near my region
Hi Linux Advocate,
I have found this a problem for the Australian servers I manage as
well. I suggest you manually test the speed of some local mirrors then
manually specify a mirror rather than relying on the fastest mirror
plugin.
If your ISP mirrors content locally then that'd
inetnum: 60.48.0.0 - 60.54.255.255
netname: XDSLSTREAMYX
descr:Telekom Malaysia Berhad
descr:Network Strategy
descr:Wisma Telekom
descr:Jalan Pantai Baru
descr:50672 Kuala Lumpur
country: MY
.
A couple different geo-ip
John R Pierce wrote:
fwiw, it appears linux advocate is sending his email from a Malaysia
IP per the email headres...
$ whois 60.50.xxx.yyy
[Querying whois.apnic.net]
[whois.apnic.net]
% [whois.apnic.net node-2]
% Whois data copyright termshttp://www.apnic.net/db
this;
-disabled the fastestmirror plugin ( frm the conf file by setting enabled=0 )
-modified CentOS-Base.repo
[base-1]
name=CentOS-5 - Base
#mirrorlist=http://mirrorlist.centos.org/?release=5arch=i386repo=os
baseurl=http://ftp.riken.jp/Linux/centos/$releasever/os/$basearch/
exclude=postfix* perl
this;
-disabled the fastestmirror plugin ( frm the conf file by setting enabled=0 )
-modified CentOS-Base.repo
[base-1]
name=CentOS-5 - Base
#mirrorlist=http://mirrorlist.centos.org/?release=5arch=i386repo=os
baseurl=http://ftp.riken.jp/Linux/centos/$releasever/os/$basearch/
exclude=postfix* perl-MIME
my repos are configured to use mirrorlist. how do i add mirrors
manually?
If you take a look in /etc/yum.repos.d/ you will see a number of
files. There should be example baseurl lines in the repo files which
will be commented out by default. Here's an example of how I use
#mirrorlist=http://mirrorlist.centos.org/?release=$releaseverarch=$basearchrepo=os
baseurl=ftp://mirror.internode.on.net/pub/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=ftp://mirror.internode.on.net/pub/centos/RPM-GPG-KEY-CentOS-5
Regards,
Oliver
oliver what kind of
I maintain the RPM that is used as part of CentOS Extras and that we use
on the CentOS servers in question.
I did some major work on the app that CentOS uses for mirrorlists and
isolists over the weekend. Especially in the AP region, as we have
picked up some mirrors there recently.
my region
Linux Advocate wrote:
johny, thanx for the link.
i think 'my' should point to jp, cn, tw, au,sg. the setup u have there is
;)
do all ISP's in .MY use the same peering/trunking or do different
providers have different sorts of international backbone
Vendor: Fedora Project
If (Vendor == Fedora Project) then repo is epel
if (Vendor == Centos) then repo is Centos
if (Vendor == Dag Apt Repository) repo is rpmforge
useful info. thanx.
___
CentOS mailing list
CentOS@centos.org
Hi,
Is there is anyway to Open Microsoft .mdb files in open office on
Centos 5.3 ?
Thanks
linux
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Hi ,
I want to install centos on fc9 machine remotely and i don't want to
ask/request datacenter people for installation .Is there any possibility
to do this using live CD? yes i am allowed to request datacenter to boot
system from LiveCD.
Thanks
___
Lanny Marcus on 2009-02-05 20:33 PM +0500, wrote :
On Thu, Feb 5, 2009 at 9:07 AM, Linux student mysubli...@gmail.com wrote:
I want to install centos on fc9 machine remotely and i don't want to
ask/request datacenter people for installation .Is there any possibility
to do this using live
- Original Message
From: John Doe jd...@yahoo.com
To: CentOS mailing list centos@centos.org
Sent: Wednesday, February 18, 2009 5:40:48 PM
Subject: Re: [CentOS] realtime backup
From: CentOS List
I had a cfml application running on mysql database. Can some suggest a
in /etc/postfix/main.cf , set myorigin=$mydomain and not as $myhostname.
From: Xia Guowen xi...@51poi.com
To: centos@centos.org
Sent: Tuesday, February 24, 2009 2:07:38 PM
Subject: [CentOS] Mail from domain problem
Hi,
I installed a CentOS 4.7
Guys,
What repo has rpms for mailscanner, clamav and spamassasin?
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Guys, what is the best way of arranging the repos with regards to their
priority? Any ideas, especially for all non base ones?
/etc/yum.repos.d/CentOS-Base.repo - priority = 1, 2
/etc/yum.repos.d/atrpms.repo
/etc/yum.repos.d/epel.repo
/etc/yum.repos.d/kbs-extras.repo
from the rpmforge
repo?
- Original Message
From: Ned Slider n...@unixmail.co.uk
Linux Advocate wrote:
Guys,
What repo has rpms for mailscanner, clamav and spamassasin?
RPMforge has clamav and spamassassin, but not mailscanner.
Mailscanner has RPMs available
replies below...
On 2/27/09, Linux Advocate wrote:
Guys, what is the best way of arranging the repos with regards to their
priority? Any ideas, especially for all non base ones?
/etc/yum.repos.d/CentOS-Base.repo - priority = 1, 2
/etc/yum.repos.d/atrpms.repo
/etc/yum.repos.d
On Fri, Feb 27, 2009 at 9:09 AM, Lanny Marcus wrote:
On 2/27/09, Linux Advocate wrote:
Guys, what is the best way of arranging the repos with regards to their
priority? Any ideas, especially for all non base ones?
/etc/yum.repos.d/CentOS-Base.repo - priority = 1, 2
/etc
On Thu, Feb 26, 2009, Joseph L. Casale wrote:
I need to setup HylaFax which leads to my first question, anyone
got an opinion on whether or not to use HylaFax or HylaFax+?
We use Hylafax together with Avantfax and are very pleased with the
results. I cannot speak to HylaFax+ .
We
Thanx kal, and to all who replied. i have understood the issue better.
/etc/yum.repos.d/atrpms.repo
/etc/yum.repos.d/epel.repo
/etc/yum.repos.d/kbs-extras.repo
/etc/yum.repos.d/kbs-misc.repo
/etc/yum.repos.d/rpmforge.repo
you can put rpmforge at 10 and epel and atrpms
Craig White wrote on Fri, 27 Feb 2009 07:46:47 -0700:
you can get clam* and newer spamassassin rpms from rpmforge
I suggest rolling your own SA. It's as simple as downloading the tarball
and rebuilding it with the included spec file. It's a simple one-line
command and documented on
Guys, i have just installed ( after reading
the docs on the mailscanner site and centos lists ) Mailscanner, and was
wondering
a.) How do i test my installation? is there some sample spam/ virus messages
that can be used to test.
b.) MailScanner -V shows;
b.1)
LibClamAV Warning:
to the Synaptics module.
Being new-ish to linux, I can't figure out the text-based editor (vi) to
modify the file. I have System Rescue CD and Ultimate Boot CD, but
(apparently) they don't mount the installed system.
vi is not too difficult.
from the commandline prompt, type ;
vi /etc/X11/xorg.conf
thanx.
- Original Message
From: tdu...@sc.rr.com tdu...@sc.rr.com
To: CentOS mailing list centos@centos.org
Cc: Linux Advocate linuxhous...@yahoo.com
Sent: Saturday, February 28, 2009 11:38:35 PM
Subject: Re: [CentOS] mailscanner installation - centos 5.2 - rpmforge
1 - 100 of 217 matches
Mail list logo
