Lanny Marcus on 2009-02-05 20:33 PM +0500, wrote :
On Thu, Feb 5, 2009 at 9:07 AM, Linux student mysubli...@gmail.com wrote:
I want to install centos on fc9 machine remotely and i don't want to
ask/request datacenter people for installation .Is there any possibility
to do this using live
Server built: Jan 30 2007 09:56:16
Kernel : 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64
x86_64 x86_64 GNU/Linux
Server Hardware :
MAIN MEMORY
(i) Memory Size 4 GB Dual-Core Intel 5160 processors.
httpd.conf
Timeout 300
KeepAlive On
MaxKeepAliveRequests 1000
KeepAliveTimeout 150
HI,
I am running oracle 10GR2 with ASM (raw luns) on two nodes running
centos 5 cluster for high availability.Can any one provide me the
oracle star tup (start,stop and status )script to use by the cluster
rgmanager so that it will stop , start and check the status by the
cluster .I am in
Hi,
We are running java application on centos4 update 5 64 bit on sun
blade x6250 hardware.But for the last couple of days we observed that
kacpid daemon eating more cpu.Attached the top output below.Can any
one suggest me how to fix the same since it is my critical production
i need your
Fabio Macchi wrote:
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of
A Linux Fanatic
Sent: martedì 23 dicembre 2008 06:08
To: CentOS mailing list
Subject: Re: [CentOS] cluster - ip address lost when service stopped
Fabio Macchi wrote
/etc/sysconfig/network-scripts/ifcfg-eth1
/etc/sysconfig/network-scripts/ifcfg-eth2
/etc/sysconfig/network-scripts/ifcfg-eth3
/etc/cluster/cluster.conf
And external ip address is removed from bond0. - I assume here
external IP is 10.0.181.41, right?
Thanks
Gowrishankar Rajaiyan | A Linux Fanatic
, Kai Schaetzl escribió:
ArcosCom Linux User wrote on Tue, 16 Dec 2008 21:31:30 +0100 (CET):
The laptop boots fine with the correct speed (usual speed), but when the
init scripts run the service cpuspeed, the performance goes low: Only
wants 800MHz!!
sounds pretty much like it's working
Linux User li...@arcoscom.com
wrote:
Ok, but is not working fine.
The last try:
1) Power off the laptop along 2/3 hours.
2) Power on and log into gnome.
3) The cpuspeed monitor shows that all is working fine.
4) Some minutes after, the speed goes down to 800 MHz and no more
wants
El Jue, 18 de Diciembre de 2008, 1:45, MHR escribió:
On Wed, Dec 17, 2008 at 4:09 PM, ArcosCom Linux User li...@arcoscom.com
wrote:
The same as before, instead compile I do the dd comand and see the
/proc/cpuinfo info at the same time the cpuspeed monitor under gnome
shows
the same
After upgrade my laptop, I discovered a low performance on it.
The laptop is a 2,73GHz Intel centrino and from some kernels versions to
now, it had a good performance, the cpu scaling worked fine.
Now, I discover that forcing in /etc/sysconfig/cpuspeed the governors
and/or max/min speeds, it
Hi,
Tell me how much is the swap space you assigned and also you can
use below commands to trace out the cause of such huge I/O.Also are
using SAN or local storage?.I don't think so you need explanation for
below commands.Run all the commands and redirect it to some file and
send it to
Hi,
If you want to allow one ip to access one destination then you can
write the below rule in iptables.
iptables -t nat -A POSTROUTING -s 192.168.101.230 -d centosip -j MASQUERADE
iptables -t nat -A POSTROUTING -d 192.168.101.230 -s centosip -j MASQUERADE
For remianing ip you can write a
Hi all,
I am running squid proxy server integrated with Content filter
Dansguardian, squidguard and clamav for Http level scanning on centos
5 .Configured webmin management tool to create and manage access
control using squidguard plug in. Now it is serving request for 100
machines and Below
Hi,
You can create the iptables rules to block the ssh connection limit rate wise.
Create a new chain named ssh_check
/sbin/iptables -N SSH_CHECK
Redirecting all request for 22 port to new chain SSH_CHECK
/sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -j SSH_CHECK
Then
con ls -l piedes
ver los usuarios y sus gruposatteFrancisco ValverdeAdministrador
Networking Universidad Central del Ecuador2008/11/10 Richard Lazo
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
Estimados, estoy iniciandome en linux con la version de CentOs 5, en
mi trabajo lo utilizan como
Hi,
I am running RHEL3u8 two node cluster,which is running oracle 9i
database.I am facing problem while rebooting second node causing my
oracle database get stopped in the active node 1 which is running my
database.so i checked below probabilities to find out when the
database get stopped.
With new kernel, appeared some problems with build proccess here.
After many minutes waiting for rpmbuild were over, a gpg problem appears!!:
...
scripts/modsign/mod-extract.c:311: warning: format '%lx' expects type
'long unsigned int', but argument 3 has type 'Elf64_Xword'
+
cuál es el problema que tienes.
Yo he instalado algún que otro nagios
2008/10/23 Ing. Ernesto Pérez Estévez [EMAIL PROTECTED]
Luis Nuñez wrote:
Hola a todos si alguien conoce uso o usa nagios en centos si podria
ayudarme
a instalar configurar
sí, está en el repo de rpmforge
saludos
yo me decanto por mail scanner tb
2008/10/23 Ing. Ernesto Pérez Estévez [EMAIL PROTECTED]
Luis Nuñez wrote:
hola a todos
tengo centos 4.4 y por por las cuentas de correos que tengo en ella pasa
muchos spam y necesito un flitro o algun anti spam para poder instalar en
mi
centos
On new CentOS 5.2 installation (and ugradation before config the diferent
programs I use), I'm having problems with Thunderbird 2.0.0.17.
Problem 1:
I configured my e-mail account (as I have in my old machine) and I have no
access to my pop3 and/or smtp servers. I write my user for the access,
envía aqui.
Si quieres enviar una propuesta de trabajo usando CentOS (o cualquier linux
en general) puedes hacernosla llegar a los centos-owners y nosotros te
ayudamos posteándola en la lista inmediatamente. Esto aplica para todos los
de la lista, si necesitan ofrecer algún trabajo contáctenos para
Te doy unos recursitos para que te los mires, Bienvenido a Linux, el
siguiente paso es que infectes a más personas con este 'virus' no lucrativo
Guia de linux http://www.guiaslinux.org/
Más manuales, recuerdo que aquí conseguí compilar mi primer nucleo de linux
super personalizado http
Hi,
Hope any one can help me. I am running centos 5.2 with sendmail and rbl
feature. I need to recieve all emails come to my sales account regardless of
rbl .
I looked on web and gave up. All I found was if I added To:sales@ ok in my
sendmail.mc , sales account will bypass rbl and get all
Si funciona... ¿para qué tocarlo?
Salu2
El Jue, 4 de Septiembre de 2008, 21:26, Enrique Rosario escribió:
Saludos.
Conrespecto al ftp.proxy y el
Frox las ultimas actualizaciones son del 2005. No se me parece como
desatendido. No existe otro que este mas actual.
-Original Message-
I have a problem with some file recognition with gnome (CentOS 5.2).
I have some DVD with AVI files I burn some time ago (and the files were
checked and the DVD are fine), and curiously only the 3 or 4 first files
were recognized as AVI files, but the rest not!.
I another times, appears to
installed
perl-version.i3860.74-1.el5.rf installed
ArcosCom Linux User wrote:
Linux myhost 2.6.18-92.1.10.1.el5_ArcosComPAE #1 SMP Wed Aug 6 22:16:52
CEST 2008 i686 i686 i386 GNU/Linux
El Lun, 25 de Agosto de 2008, 0:37, Eric Shubert escribió:
What does
$ uname
:
Errno architecture (i386-linux-thread-multi-2.6.9-42.0.3.elsmp) does not
match executable architecture
(i386-linux-thread-multi-2.6.18-53.1.14.el5pae) at
/usr/lib/perl5/site_perl/5.8.8/Errno.pm line 11.
Compilation failed in require at /usr/lib/perl5/5.8.8/File/Temp.pm line 138.
BEGIN failed
, ArcosCom Linux User enlightened
us:
I'm having problems with perl.
I'm receivings this e-mails from logwatch everyday and appears to be a
problem with perl.
I explain a bit before expose the errors that I received: I tried to
download all perl* packages, uninstall the repeated ones
Thanks too all for you help, works great!
Best regards
2008/8/17 Les Mikesell [EMAIL PROTECTED]:
Mike wrote:
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
Hello.
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
___
CentOS mailing list
CentOS@centos.org
2008/8/17 Rudi Ahlers [EMAIL PROTECTED]:
On Sun, Aug 17, 2008 at 11:19 AM, Linux Man [EMAIL PROTECTED] wrote:
Hello.
I need to copy several file from one PC to another over Internet, both
using CentOS.
What file manager that works over console do you recommend me?
Thanks at all
Best Regards
working configurations with 4 disk cheap machines.
Guess I should say something.
/sd[abcd]1: 20 GB, ext3, RAID-1 as /dev/md0, linux-raid autodetect
(type: fd), boot flag active, mounted as / (incl. /boot)
/sd[abcd][23...]: whatever you want
I installed grub like this:
grub device (hd0) /dev/sda
wellcome
2008/7/4 Victor Padro [EMAIL PROTECTED]:
Bienvenido.
:)
--
It is human nature to think wisely and act in an absurd fashion.
Todo el desorden del mundo proviene de las profesiones mal o mediocremente
servidas
___
CentOS-es mailing
Necesitas configurar postfix para virtual host.
Te paso instrucciones para debian, sólo para que te hagas a la idea. Busca
las de CentOS o apañate con esto
http://www.debuntu.org/2006/05/05/45-how-to-postfix-and-virtual-hosts
2008/7/3 Hector Cuadros Prosopio [EMAIL PROTECTED]:
Buen dia a todo
prueba con ./icecast dentro de la carpeta donde descomprimiste icecast. Si
no va a estar frente al equipo o lo vas a apagar y quieres hacer straming
desde otro sitio o simplemente dejar corriendo el comando prueba a mandar al
comando a segundo plano con ./icecast . Para terminar la tarea en
Aprovecha a mirar a ver si encuentras alguna actualizacion para tu
motherboard, algun firmware suele solucionar problemas en máquinas con
linux, ya me he encontrado con cosas bastante curiosas de coger... pero
cuidado, hazlo solo si te ves experto en la materia ;-)
Saludos
2008/6/3 Roger Peña
Hola, prueba a instalar como medida de seguridad inicial las ultimas
versiones de php y mysql. En centos 5 viene la 5.1.6, usa algún repositorio
para actualizar la version de tu php a la 5.2.6, pues se conocen problemas
de seguridad hasta la version de php 5.2.3. En caso de no haber dado salto a
On Mon, Jun 2, 2008 at 6:22 PM, David Mackintosh
[EMAIL PROTECTED] wrote:
...which I think is because the IDE controller isn't really
recognized, or is pretending to be a SATA controller:
For my cruiosity, what is your current kernel version?
___
On Sat, May 31, 2008 at 1:16 PM, Johnny Hughes [EMAIL PROTECTED] wrote:
I also normally build all the extras kmods while I build the centosplus
kernel, so they were also not yet done ... however I did go ahead and build
I dont intend to blame anybody but kmod_xfs was a couple of days late
for
Abelardo, echalé un vistazo a este tutorial, a mi me vino de perlas
http://www.linux-mail.info/
2008/5/30 Abelardo Ramírez Ferrer [EMAIL PROTECTED]:
Todo resuelto, ya tengo instalado un servidor de correo Postfix+Dovecot.
Ahora voy para Spamassasing y Clamav así que nos veremos pronto.
Hi guys, I have this configuration:
LAN -- LINUX BRIDGE -- LINUX BRIDGE -- TS
The linux's bridges are for wifi purposes (2 centos machines) and is
working fine.
The problem I have is that the TS are 3 windows TS in load balancing
configuration. There is 1 IP for general purposes and every TS
2 questions:
a) Must I put the same IP with 3 virtual macs under the same interface?
b) Must the ARP entry be changed in the bridges? In the computers?
Regards
El Mie, 28 de Mayo de 2008, 18:12, Lorenzo Quatrini escribió:
ArcosCom Linux User ha scritto:
I observed that all TSn IP's has
On Sat, May 24, 2008 at 8:29 PM, Fred Noz [EMAIL PROTECTED] wrote:
In addition to easy maintenance, readonly-root adds a layer of security.
The security is broken if someone gains access to the root user, but
then many security protections are lost if someone gains root.
However, this should
Hi,
Without any update, hardware/software modification, etc... one of my
systems Hourly restart problem started again. Currently, I counted 5
restarts at 59th minute. No log entry, no console error, nothing
really interesting. If I do not see camera records with my own eyes,
I'll suspect about
On Mon, May 26, 2008 at 12:30 AM, Gregg McClintic [EMAIL PROTECTED] wrote:
Anything in the bios called watchdog turned on?
Waiting for morning (it's late night here) for further diag.
Should I disable it? Or is it malfunctioning because of CentOS?
Thanks...
On Mon, May 26, 2008 at 2:15 AM, Karanbir Singh [EMAIL PROTECTED] wrote:
I've been reading some of your recent comments, Anonymous looser, and
I've really got to say this - you seem to make some authoritative style
comments on things you really dont know much about. eg. in this case -
the
On Mon, May 26, 2008 at 3:16 AM, Christopher Chan
[EMAIL PROTECTED] wrote:
I believe you cannot do it via the installer yet. Can anybody confirm the
presence of raid10 personality in Centos 5?
Installer does not have raid10 as an option. Not sure whether boot cd
has this module or not. But
tends to show theirs for a comparison. But again, according to
general inclination, I have a great feeling that I am right. Besides,
this is all about the philosophy of open-source. linux kernel-raid
still has my vote.
Nevertheless, closed-source firmwares are everywhere, should we become
paranoid
On Fri, May 23, 2008 at 4:19 AM, Christopher Chan
[EMAIL PROTECTED] wrote:
And stick with md-raid 10 (also known as software raid) because it is
much more intelligently designed than any
closed-source-embedded-raid-controller.
This was valid until...quite a few years ago.
Has hardware-raid
3 disks is enough to supply a
minimum level of redundancy. You should have 2 copies of each stripes
on either 2 of 3 disks. But in 3 disk configuration loss of 2 disk
means total loss. Go check with man mdadm.
Lastly, it's kinda strange that your name is Linux: Maybe you're young and
your
On Thu, May 22, 2008 at 7:12 PM, Guy Boisvert [EMAIL PROTECTED] wrote:
You do not need two (2) raid controllers unless you want to have
redundancy at the controller level. Adaptec, 3Ware, etc do RAID 50.
For RAID 50, you need at least 6 disks.
http://en.wikipedia.org/wiki/RAID
For
On Wed, May 21, 2008 at 3:59 AM, Nicholas [EMAIL PROTECTED] wrote:
Seems like it is the way Intel chips are designed. One solution would be to
ensure that 64bit is used. However, due to cost I am sure many would have
gone for the 32bit machines with AHCI mode.
Well, 64bit is the solution to
On Tue, May 20, 2008 at 8:13 PM, Nicholas [EMAIL PROTECTED] wrote:
Typically Linux hackers can hack the kernel to use very large RAM. Current
applications are built to access up to 4Gb RAM at a time only. For machines
with RAM of more than 4Gb you need to verify that the CPU comes
I guess your Gigabyte is a desktop one
Well, in production I used to use Intel server and workstation boards.
Not the best but more cooperative than most manifacturers with kernel
team I guess.
Currently I am testing some AMD stuff...
On Thu, May 15, 2008 at 2:43 PM, Ryan Nichols [EMAIL
On Wed, May 14, 2008 at 9:58 PM, Doug Tucker [EMAIL PROTECTED] wrote:
This is a matter of agreeing to disagree on the release of a kernel and
a supported file system. If you had read my thread and subsequent
paragraph you're taking issue with properly, you would have gotten that.
My whole
On Wed, May 14, 2008 at 11:50 PM, John R Pierce [EMAIL PROTECTED] wrote:
btw, what is WITH all these lame gmail addresses? linuxlist ? centoslist
?? Do I call you Mr Linux, or Mr List ?
Nothing to do with gmail. About calling me, it's a nice thing but
probably not needed. And I also know
Hi,
I have uptodate x86_64 CentOS 5 with official repositories.
mdadm version is v2.5.4 - 13 October 2006
This version is known to have problems with raid10 configurations.
Sadly, I have a 4 disk raid10 on this system.
I tried adding Dag's repository but system complains about some
packages
Well, I should add a terrible story for XFS...
I did a yum update and after updating many packages I rebooted and viola...
Old xfs module ruined my 1.2TB partition. After updating to correct module and
hours of xfs_repair I had to move and rename 500 subfolders from lost+found.
I am using CentOS
On Mon, May 12, 2008 at 11:48 PM, Tru Huynh [EMAIL PROTECTED] wrote:
On Mon, May 12, 2008 at 11:00:18PM +0300, Linux wrote:
Well, I should add a terrible story for XFS...
I did a yum update and after updating many packages I rebooted and
viola...
You seem to enjoy living dangerously
On Tue, May 13, 2008 at 1:15 AM, Tru Huynh [EMAIL PROTECTED] wrote:
On Tue, May 13, 2008 at 12:40:22AM +0300, Linux wrote:
What a coincidence. That is the 1st time I live such a thing. Well,
show me a way to prove.
/var/log/messages ?
Only a small part of it.
This log is after update
No he visitado el enlace que muestras, pero yo tenía el mismo problema que
tú hace tiempo.
Lo solucioné estableciento marcas para las interfaces, de forma que
agregué reglas para que la conexión se marcase en función del interfaz de
salida que se usase y que se enrutase hacia dicho interfaz de
On Fri, Apr 11, 2008 at 3:18 AM, Linux [EMAIL PROTECTED] wrote:
On Fri, Apr 11, 2008 at 2:43 AM, William L. Maltby
[EMAIL PROTECTED] wrote:
On Fri, 2008-04-11 at 02:02 +0300, Linux wrote:
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED]
wrote:
] Every 59
Hi,
I have a CentOS 5.0 running as a web server.
# uname -a
Linux hostnamehidden.net 2.6.18-53.1.14.el5 #1 SMP Wed Mar 5 11:37:38
EST 2008 x86_64 x86_64 x86_64 GNU/Linux
Every 59 minutes (maybe every hour) it reboots without any logs,
without any traces and unfortunately with breaking software
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED] wrote:
] Every 59 minutes (maybe every hour) it reboots without any logs,
] without any traces and unfortunately with breaking software raid.
] After reboot dmesg does not have any strange entries.
this really only helps
On Fri, Apr 11, 2008 at 2:43 AM, William L. Maltby
[EMAIL PROTECTED] wrote:
On Fri, 2008-04-11 at 02:02 +0300, Linux wrote:
On Fri, Apr 11, 2008 at 1:44 AM, Benjamin Karhan [EMAIL PROTECTED] wrote:
] Every 59 minutes (maybe every hour) it reboots without any logs,
] without any
Tendrás que instalar la JVM bajo windows para que los programas emulados
la pillen de allí.
Salu2
El Lun, 10 de Marzo de 2008, 18:59, Gino Francisco Alania Hurtado escribió:
Una consulta amigos .
Gobierno equipos en el cual el nuevo soft. de gestion sigue siendo
diseñado en
java , pero
Solo por confirmarte lo que ya te han contestado otros usuarios.
Sí, tienes que indicar en las ACL quiénes quieres que naveguen.
Salu2
El Jue, 28 de Febrero de 2008, 1:02, Alexander López Lapo escribió:
Estimados Todos. Tengo una pequeña inquietud, tengo configurado mi
servidor proxy sobre un
Poder ser, puede ser por el kernel, que no tengas la versión adecuada al
kernel.
La pinta del error es que no encuentra un tipo de datos que quizás se
defina en el kernel.
¿Has probado a preguntar si es compatible ipwraw-ng con el kernel 2.6.18
(que es el que lleva CentOS? Lo mismo no es
1) En lo que se trata a compilar fuentes, NUNCA omitas líneas intermedias,
los propios nombres de los fuentes pueden servir para indicarte el fallo.
2) ¿Tienes instalados los paquetes kernel-headers y kernel-devel? Si no es
así, instálalos y prueba a compilar de nuevo.
Salu2
El Lun, 4 de
Yo no lo he probado ni sé cómo funciona, pero busca información sobre el
módulo clamfs (creo que es así cómo se llama).
Sería tema de montarte un sistema de ficheros virtual que embeba el
escaneo de ficheros. Creo que es ese el propósito del módulo clamfs (o
como se llame). En la documentación
Por favor, que alguien me heche un cable con esto.
Gracias.
El Vie, 25 de Enero de 2008, 23:53, ArcosCom Linux User escribió:
La ventana de error que sale al intentar entrar pone el texto:
No password configured for VNC Auth
Salu2
El Vie, 25 de Enero de 2008, 23:29, ArcosCom Linux User
Hola colisteros,
resulta que estoy intentando configurar en una máquina con CentOS 5.1
lo mismo que tengo en una FC5, que es acceso por terminal a través de
Xvnc.
He puesto la misma configuración que en FC5, pero en CentOS 5.1 no
funciona.
Mi idea es poder tener acceso a través de
Hello group
I added a new partition in fstab, and works without a problem.
I used mkfs.ext3 to create the partition.
My problem is that every 26 boots, the system tells that the partition
have no been checked since 26 systems boots, ant start to check my new
partition. This is a lot of time
I read that man page before, but had not seen anything useful, shame on me :(
Do you say, for example, change mount count with tune2fs?
Thanks a lot
Best regards
2008/1/8, Chris Mauritz [EMAIL PROTECTED]:
Linux Man wrote:
Hello group
I added a new partition in fstab, and works without
Works great! thanks to all !! :)
It's a good choice to force be checked at boot time the partition /?
2008/1/8, Linux Man [EMAIL PROTECTED]:
I read that man page before, but had not seen anything useful, shame on me :(
Do you say, for example, change mount count with tune2fs?
Thanks a lot
Thanks to all.
I tried this:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1PNid=13PFid=4Level=5Conn=4DownTypeID=3GetDown=falseDownloads=true
And works now.
Regards
El Vie, 28 de Diciembre de 2007, 17:54, ArcosCom Linux User escribió:
Hi guys;
I'm having a problem
Hi guys;
I'm having a problem with a new pc that has an Realtec ethernet device.
Don't know why the driver is not loading and is not detected during
installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is
detected. No dmesg or /var/log/message.
¿Any help on how
Hi guys;
I'm having a problem with a new pc that has an Realtec ethernet device.
Don't know why the driver is not loading and is not detected during
installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is
detected. No dmesg or /var/log/message.
¿Any help on how
On Nov 13, 2007 5:49 AM, David Hrbáč [EMAIL PROTECTED] wrote:
Alain Spineux napsal(a):
On Oct 15, 2007 2:09 PM, David Hrbáč [EMAIL PROTECTED] wrote:
Hi,
anyone to point me URL on initrd.img creating? I have custom kernel and
want to create initrd.img for install media.
mkinitrd
On Oct 15, 2007 5:49 AM, Johnny Hughes [EMAIL PROTECTED] wrote:
David Hrbáč wrote:
Hi,
anyone to point me URL on initrd.img creating? I have custom kernel and
want to create initrd.img for install media.
mkinitrd /tmp/initrd.img 2.6.18-8.1.14.el5.hrb -v -f create unusable
file for
Hello
I'm building a router/proxy/firewall, the default governor is
ondemand, but for this application, what governor is best suited? (for
example conservative?)
Thanks at all!
Best regards
___
CentOS mailing list
CentOS@centos.org
I forgot tell that the os is CentOS 5 i386
sorry
2007/10/24, Linux Man [EMAIL PROTECTED]:
Hello
I'm building a router/proxy/firewall, the default governor is
ondemand, but for this application, what governor is best suited? (for
example conservative?)
Thanks at all!
Best regards
or knoppix witch module was loaded for your two nic.
Then try a
# modprobe your_module_name_here
then
# dmesg
to look if both nics where recognized.
If so you have to update your modprobe.conf
Alain
Regards
On 10/22/07, Linux Man [EMAIL PROTECTED] wrote:
I'm building a Linux box to act
I'm building a Linux box to act as Proxy/Router/Firewall.
I'm using CentOS 4.5, with an old motherboard (Asus A8V-X), and two
Ethernet NIC, based on a realtek chip, that's widely supported under
2.4 and later kernel (the cards were functioning excellent in another
PC whit Fedora Core 1).
CentOS
No, it doesn't use that.
The unusual things that I use is Nat (S and D), and mark to support TC.
2007/10/22, Barry Brimer [EMAIL PROTECTED]:
Quoting Linux Man [EMAIL PROTECTED]:
I'm building a Linux box to act as Proxy/Router/Firewall.
I'm using CentOS 4.5, with an old motherboard (Asus A8V
Hi all.
I'm having problems trying to suspend/hibernate my Dell Latitude D810 Laptop.
Basically I have an ATI X600 videographics and SATA harddrive and run
httpd and mysqld daemons on it.
I use fglrx (ATI propietary drivers) and the open too with no success.
I tried with 1 and 2 screens
altogether... are there any
other suggestions?
- Gareth
On 9/7/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux wrote:
The only thin I can think of is that maybe my crypted
password
contains an escape sequence that might not be properly
handled in
anaconda?
The crypted password
Hey,
I'm trying to run a kickstart script on a new piece of hardware...
I've never used this HW before, so it's possible that there may be
something faulty...
After the DVD boots, I type linux ks=http://blah/blah.ks; and hit enter.
Once I get to the anaconda line which says running /sbin/loader
On 9/27/07, Bart Schaefer [EMAIL PROTECTED] wrote:
On 9/26/07, semi linux [EMAIL PROTECTED] wrote:
I just finished installing CentOS 5 (again)... and I'm having trouble
with my X config (I _think_).
If I 'startx' then switch to a console (using CTRL+ALT+F*) and then
back to X (CTRL+ALT
I just finished installing CentOS 5 (again)... and I'm having trouble
with my X config (I _think_).
If I 'startx' then switch to a console (using CTRL+ALT+F*) and then
back to X (CTRL+ALT+F7), 1/2 the time it comes back, the other half I
get a black screen and I can never recover the session.
X
On 9/21/07, Tony Mountifield [EMAIL PROTECTED] wrote:
In article [EMAIL PROTECTED],
Joshua Baker-LePain [EMAIL PROTECTED] wrote:
On Thu, 20 Sep 2007 at 5:04pm, semi linux wrote
Wicked! that worked... How weird... I'm going to have to look this up
and read about it... it seems weird
En mi trabajo usamos en entornos de producción lo siguiente:
1) JBOSS como servidor de aplicaciones.
2) PostgreSQL como SGBD.
3) J2EE
Esta configuración cumple perfectamente los requisitos que planteastes
inicialmente, añadiende se consigue perfectamente alta disponibilidad.
Como
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind of response, but if the content (download
or page itself) is larger in size (downloads never pass 100K), then it
On 9/20/07, Scott Silva [EMAIL PROTECTED] wrote:
semi linux spake the following on 9/20/2007 4:31 PM:
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind
On 9/20/07, James A. Peltier [EMAIL PROTECTED] wrote:
semi linux wrote:
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some kind of response, but if the content
On 9/20/07, Joshua Baker-LePain [EMAIL PROTECTED] wrote:
On Thu, 20 Sep 2007 at 4:31pm, semi linux wrote
I have a very odd problem connecting to some websites from my CentOS 5 box
Target websites:
www.connecttech.com
www.3ware.com
(two of my HW vendors)
I can usually get some
No, there is another way.
Using the l7filter user-space daemon.
You need to NFQUEUE target with IPTABLES and configure de L7 daemon to do
the work.
I don't use it, but in http://l7-filter.sourceforge.net/HOWTO-userspace
there is more information about it.
Regards
El Mie, 19 de Septiembre de
¿Has probado con mount para ver dónde está montado el recurso remoto?
Salu2
El Dom, 16 de Septiembre de 2007, 22:41, luiso escribió:
Amigos de la lista, soy nuevo con el CentOS
hay una una opcion en el menu en el CentOS con escritorio GNOME, sobre
conectarse a un lugar remoto,
ahora bien
the lines to make sure I don't have any special
characters in there...
The only thin I can think of is that maybe my crypted password
contains an escape sequence that might not be properly handled in
anaconda?
I'm completely stumped.
- G.
On 9/6/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux
On 9/5/07, Johnn Tan [EMAIL PROTECTED] wrote:
semi linux wrote:
Sorry, should have specified - I'm using kickstart to load my machine(s).
On 9/4/07, semi linux [EMAIL PROTECTED] wrote:
Is there some kind of caveat to using the rootpw --iscrypted directive
and then specifying a graphical
101 - 200 of 217 matches
Mail list logo
